• Order Form

  • Team Type*

  • Please check if each item is available on Amazon before checking other vendors. Prime Delivery is awesome, let's try to take advantage of that! 😊

    Other Preferred Vendors:

    • Adafruit
    • Digi-key
    • Grainger
    • McMaster Carr
    • Mouser Electronics
  • Add another item?*
  • Add a third item?*
  • Add a fourth item?*
  • Add a fifth item?*
  • Add a sixth item?*
  • Add a last item? (maximum entries is seven -- if you need to order more, please submit an additional order form)*

  • OEDK Store

    This is where you purchase items from the OEDK's Stock using your team budget.

    If you need to purchase from an online vendor, choose "Online Vendor" above. 

  • Image field 119

  • Birch Plywood 24"x24"

    $5.00

    Plywood Actual Thickness: ¼” = ~0.2” or 1/8" ~0/11 Description: Flat Birch Plywood is fine grained, pale in color, with a satin-like sheen. Uses: Vector cuts & engravings as well as raster engravings with moderate detail. Examples: Enclosures, gears, mold form creation, wheels, stands, shelves Recommended Adhesive: Wood glue; gel-based adhesives

  • Image field 124

  • 1/8" Acrylic - Extruded Acrylic – 18"x24"

    $13.88

    Extruded Acrylic Description: Extruded Acrylic is less expensive, but it softer than Cast Acrylic, can scratch easier and may contain impurities. Still a good quality material and the more commonly available material on the market. Engraves matte grey and leaves a clean cut; flame polished, glass-like edge quality. Uses: Vector cuts & engravings, but not recommended for raster engraving. Can be tapped and threaded, but shouldn’t be torqued too much or fracturing will occur. Examples: low-pressure water-tight enclosures, windows, light diffusion Recommended Adhesive: Weld-on 4 Acrylic Solvent in a needle applicator bottle (located in machine shop), follow up with silicone caulk for water-tight applications; gel-based adhesives

  • Image field 128

  • 1/4" Acrylic - Extruded Acrylic – 18"x24"

    $25.77

    Extruded Acrylic Description: Extruded Acrylic is less expensive, but it softer than Cast Acrylic, can scratch easier and may contain impurities. Still a good quality material and the more commonly available material on the market. Engraves matte grey and leaves a clean cut; flame polished, glass-like edge quality. Uses: Vector cuts & engravings, but not recommended for raster engraving. Can be tapped and threaded, but shouldn’t be torqued too much or fracturing will occur. Examples: low-pressure water-tight enclosures, windows, light diffusion Recommended Adhesive: Weld-on 4 Acrylic Solvent in a needle applicator bottle (located in machine shop), follow up with silicone caulk for water-tight applications; gel-based adhesives

  • Image field 132

  • 5/8" Acrylic - Extruded Acrylic – 18"x24"

    $32.12

    Extruded Acrylic Description: Extruded Acrylic is less expensive, but it softer than Cast Acrylic, can scratch easier and may contain impurities. Still a good quality material and the more commonly available material on the market. Engraves matte grey and leaves a clean cut; flame polished, glass-like edge quality. Uses: Vector cuts & engravings, but not recommended for raster engraving. Can be tapped and threaded, but shouldn’t be torqued too much or fracturing will occur. Examples: low-pressure water-tight enclosures, windows, light diffusion Recommended Adhesive: Weld-on 4 Acrylic Solvent in a needle applicator bottle (located in machine shop), follow up with silicone caulk for water-tight applications; gel-based adhesives

  • Image field 161

  • SanDisk 32GB Ultra

    $23


    -Flash Memory Type Micro: SDHC
    -Memory Storage Capacity: 32 GB
    -Compatible Devices: Smartphone
    -Additional Features: Drop Proof, Temperature Proof, Water Proof, X Ray Proof
    -Read Speed: 120 megabytes per second
    -Media Speed: 120MB/s
    -Hardware Connectivity: microSDHC
    -Secure Digital Association Speed Class: Class 10

     

  • Image field 152

  • ELEGOO UNO R3

    $11

    100% compatible with the Arduino IDE.

    The ELEGOO UNO R3 controller board now uses a CH340C chip and SMD ATmega328p chip (same as Arduino UNO R3), with a faster transfer rate and more memory.

    Clearly printed pin names on the female header connector, are more precise and much easier to use the wires.

    ELEGOO UNO R3 controller board can be powered via a USB connection and an external power supply.

    A good choice for getting started with electronics and coding, and ideal for your 3D printer, robotic and electronic projects.

     

  • Image field 157

  • Raspberry Pi 3 Model B+ (1GB)

    $53

    -Quad Core 1.2GHz Broadcom BCM2837 64bit CPU
    -1GB RAM
    -BCM43438 wireless LAN and Bluetooth Low Energy (BLE) on board
    -100 Base Ethernet
    -40-pin extended GPIO
    -4 USB 2 ports
    -4 Pole stereo output and composite video port
    -Full size HDMI®
    -CSI camera port for connecting a Raspberry Pi camera
    -DSI display port for connecting a Raspberry Pi touchscreen display
    -Micro SD port for loading your operating system and storing data
    -Upgraded switched Micro USB power source up to 2.5A

     

  • Image field 165

  • Raspberry Pi 3 Power Supply Kit

    $14

    -Clear Case for Raspberry Pi 3: Miuzei Clear Acrylic Pi 3 B Case is Only designed for Raspberry pi 3 B, Not Supported Pi 4 or Pi 5

    -Keep RPi 3 Cooling: New Rpi3 B case with a Silence DC 5V cooling fan and 3 pcs Aluminum heatsinks, double cooling system keep your pi 3 B+ cool quickly even the CPU under high load.

    -Power Supply for Raspberry Pi: case for raspberry pi 3 with a 5V 3A power supply which has an ON/OFF switch, easy to power on/off your pi 3 b+ / 3 b / 2 b. No need to worry about overvoltage or overcurrent.

    -Easy To Access All Ports: Miuzei case Compatible with Raspberry pi 3 model B case can perfect access all ports including the micro HDMI, Audio/Video, USB and Ethernet Ports, Micro USB Power Connector and Micro SD Card.

     

  • Do you need rush delivery?*

  • Before any Rush Delivery orders are placed, we will need approval from your Faculty member. 

    Please have your faculty member send an email to the OEDK staff member placing the order for you, approving expedited shipping.

    The order will be placed on hold until we receive approval.

    Thank you! 😊

  • What type of rush delivery do you need?*
  • SOURCE (For Airtable)
  • Should be Empty: