WYC PHRF Handicap Certificate Form

WYC PHRF Handicap Registration
All items marked with an * are required. All measurements are to be entered in decimal feet.

All ratings are determined by PHRF-WYC Class Rules.

PHRF-WYC Rules and Rating Formulas are published under PHRF Fleet Rules.

You must declare which fleet you will primarily be sailing in. If you are primarily a PHRF - I boat, but submitting a secondary form for PHRF - II, select "PHRF - I" as that is your declared primary fleet and vice versa if a PHRF - II boat submitting a secondary PHRF - I form. Please add a comment in regards to this being a secondary fleet form in the comments box at the end of this form.
Declared Fleet *

PHRF - IPHRF - II
Boat Owner Contact Information
Name of Boat Owner*

First NameLast Name
Address*

Street Address

Street Address Line 2

CityState / Province

Postal / Zip Code
Email*
example@example.com
Phone Number*

Area CodePhone Number
Boat Information
Manufacturer*
Model*
Name on Boat*
Sail Number*
Measured LP of Largest Head Sail*
Measure the distance from luff (leading edge of sail) to the clew (corner where sheets are attached) on a line perpendicular to the luff. The perpendicular point on the luff typically occurs somewhere between 25% and 40% of the distance “up” from the tack of the sail. Perpendicular is ALWAYS the shortest measurement, so it can be found by holding the end of the tape measure at the clew while sliding the measuring end up and down a bit near the estimated perpendicular (90 degree) point.
Main Sail*

StandardNon-Standard
Most mainsails are standard for the boat/rig. If you have a tall or short rig be sure to include the I-J-P-E measurements below. If there is something else non-standard about your mainsail, tell us in the comments at the end of this form. i.e. main sail luff dimension.
Spinnaker*

StandardNon-StandardNFS (No Spinnaker PHRF - II)
Please read this paragraph: A standard spinnaker has a girth of 1.8 x J. If you have a spinnaker with a different girth, check Non-Standard and tell us about it under comments.
Length of Spinnaker/Whisker Pole (Inside jaw to inside jaw). If no pole, enter 0 (zero).*
Engine. For "Inboard", enter information in text box*

Stowed, no dragDrags one tackDrags two tacksOther
Rig Measurements

The below rig/hull data is often not crucial for determining a rating (except non-standard configurations), as all ratings are based on measurement data published by US Sailing. However, it is useful for distinguishing similar models from the same manufacturer in the US Sailing database. While it may not be crucial, please provide it. If you do not know your boat's dimensions, they can be found by looking your boat up at www.sailboatdata.com.
J:
I:
P:
E:
LOA:
LWL:
Draft:
Beam:
Displacement:
Ballast:
Comments:
Please verify that you are human*
You will receive a confirmation email in addition to being sent to a confirmation page after clicking the submit button. If you received a confirmation email, your form was submitted and information sent to the WYC PHRF Fleet Ratings Chair.
Should be Empty:

WYC PHRF Handicap Registration

Boat Owner Contact Information

Boat Information

Rig Measurements