Vehicle Self-Tech Form

SoloSport Vehicle Technical Self-Declaration

This form must be submitted prior to arrival at the event.
First and Last Name of Driver:*
Vehicle#:*
Event Name*
Event Date*

MonthDayYear
Date
EACH ITEM MUST BE VERIFIED BY THE PARTICIPANT

Safety Items*

	Verified	Not Applicable
Helmet: FIA or SFI approved, within expiry date.
Safety Harnesses: FIA or SFI approved, within expiry date and installed to manufacturer's specifications.
OEM seat belts: Functional and in good condition.
Seats: Securely mounted and in good condition.
Battery: Securely tied down, battery box for remote battery.

Brakes*

	Verified	Not Applicable
Brake lights functional.
Friction Materials: pads, shoes; greater than 50% of manufacturer's thickness specifications.
Calipers and/or brake cylinders: no leaks, operating freely, attachment hardware secure.
Steel and flexible lines: fittings, attachments, mounting and integrity ok.
Brake fluid: level checked and OK.
Brake fluid: changed in accordance with manufacturer's specifications.
15 second static brake test: pedal firm - no loss of foot pressure.

Steering and Suspension*

	Verified	Not Applicable
Ball joints/swivel point: within wear limits, grease seals intact, attachment secure.
Idler arm, pitman arm, links & tie rod/link ends: within wear limits, secure attachment, seal intact.
Bearings: hubs properly adjusted within manufacturer's specifications, cotter pins or locking devices secure.
General condition of system: springs, shocks, bushings, frame attachments, anti sway bar mounting.

Tires and Wheels*

	Verified	Not Applicable
Wheels and tire valves: In good visual condition with no apparent cracks.
All studs/nuts: present & fully threaded for secure attachment.
Tires: no cord showing, no cuts, no interference with body throughout range of motion.

Fuel System*

	Verified	Not Applicable
Gas tank or fuel cell: no leaks, attachment secure, filler cap and vent cap present.
Fuel lines: In good condition, no leaks or structural corrosion.
Fuel filter(s): clamps on flex hose, no cracks or leaks.
Fuel delivery lines from tank: No leaks, secure routing.
Carburetor, fuel injection systems, injectors: No leaks.

Exhaust System*

	Verified	Not Applicable
Flanges, hangers and brackets securely mounted.
The exhaust system must not leak at pipe flanges or joints.
Exhaust pipe must terminate to the side or rear of the car.
Vehicle sound levels within limits of the event.

Participant's Declaration -The undersigned(s) acknowledges that at all times it is the participant's responsibility to ensure that the car and its components and safety equipment, and the participant's personal safety equipment, meet the regulatory safety and technical requirements of the event entered.
Signatures:
Signature of Entrant*

Clear
Signature of Driver*

Clear
Should be Empty: