Concept Canopy Pricing

Quick select

AAV4X4 Canopy ***Special order required*** Complete Aluminium canopy for Australian Adventure Vehicles Isuzu or Fuso truck. Mounted to AAV4X4 kinetic subframe (sold separately) Price starting from $32,550

$32,550AUD Quantity 1 2 3 4 5 6 7 8 9 10

  

American Vehicle Canopy Complete Chassis mounted aluminium canopy to suit American vehicle. Weights starting from 200kg

$35,000AUD Quantity 1 2 3 4 5 6 7 8 9 10

  

Toyota LC300 CanopyA complete chassis mounted canopy to suit a LC300 dual cab with extended chassis. Weight starting from 180kg.

$29,990AUD Quantity 1 2 3 4 5 6 7 8 9 10

  

Dual cab canopy Aluminium chassis mount canopy to suit dual cab ute. Weight starting from 160kg Price starting from $21,990

$23,500AUD Colour coded paint finish Raptor Coat/Colour Code Pearl paint finish

  

6 Wheeler Canopies (POA))Canopies and Tray options to suit 6 Wheel conversions. Price on Application.

$27,500AUD Colour coded paint finish Pearl paint

  

Toyota LC200 Canopy A Complete chassis mount canopy to suit a LC200 dual cab (with a chassis extension of 650mm and above). Weight starting from 180kg.

$29,500AUD Colour coded paint finish Pearl paint finish

  

Build your own

Chassis mount canopy Our integrated canopy is a complete tub or tray replacement, one piece unit bolted to the chassis of the vehicle. (This option suits all makes and models - please enquire for vehicle specific sizing)Specially designed from our own aluminium extrusions and TIG welded frame, this option is built to maximize strength whilst keeping weight as low as possible. These canopy options start from as low as 180kg. Our canopies are designed and built in house to suit each individual client. The standard inclusion on this item are as follows:2 door aluminium canopy,Heavy duty roof,2 x under tray toolboxes,2 x LED tail lights,2 x number plate LED lights,2 x tail light protective surrounds,2 x mudguards, 2 x mud flaps,2 x air vents, 1 x electrical inlet. Please select your preferred canopy finish from the drop box below.

$16,950AUD Canopy Finish Chequer plate finish Colour coded 2PAC finish Raptor coat/Colour code 2PAC finish Pearl Paint 2PAC finish

  

Bolt on canopyA complete canopy fitted to your current tray (or one of ours) - Finished in either mill/chequer plate with a polished frame or a flat sheet finish colour coded to your vehicle.Includes 2 lockable doors, balloon rubber sealing, and fitting to your vehicleThis option uses the floor of the tray as the floor of the canopy, if you would like the canopy to have its own floor please also select the 'inter-grated floor' option.

$12,535AUD Canopy Finish Chequer plate finish Colour coded 2PAC finish Raptor Coat/Colour code 2PAC finish Pearl Paint Finish
Item subtotal:$0.00AUD

  

Aluminium TrayAluminium trays include a chequer plate deck, 2 x under tray toolboxes, mudguards and mudflaps headboard, drop-sides, internal tie down points, LED tail lights and tail light covers (unpainted) Starting From:

$9,000AUD Tray Finish Powdercoated finish Colour coded paint 2PAC Solid Raptor coat finish Pearl paint finish

  

Under tray toolboxes (each)Our under tray toolboxes are a great option for more storage. Designed and built in house to suit your canopy these are a great option for extra storage. Available in Flat sheet (raw or painted) and chequer plate. Also available in 'Off-road tapered style' or 'Semi-offroad' and 'Square'. Handy Tip: American vehicles and 200 series dual cab owners will require this option on the rear LHS and the next option 'Fuel filler toolbox' for the rear RHS. (included when purchasing stand-alone tray)

$560AUD QuantityStyle Flat sheet tapered, off-road Flat sheet semi-off-road Flat sheet square Chequer plate. off-road Chequer plate, semi-off-road Chequer plate square

  

Under tray fuel filler toolboxes (each)American vehicles and 200 series dual cabs only. Our under tray toolboxes are a great option for more storage. Designed and built in house to suit your canopy these are a great option for extra storage. Available in Flat sheet (raw or painted) and chequer plate.Also available in 'Off-road tapered style' or 'Semi-offroad' and 'Square'.Handy Tip: American vehicles and 200 series dual cab owners will require this option on the rear RHS and the previous option 'Under tray toolbox' for the rear LHS.(included when purchasing stand-alone tray)

$600AUD Style Flat sheet tapered, off-road Flat sheet semi off-road Flat sheet square Chequer plate tapered, off-road Chequer plate semi off-road Chequer plate square

  

Drop Down Rear ladder Drop down ladders are available in different combinations and will depend on other accessories selected for the rear wall such as spare tyres and jerry cans.Available in mill, powder-coat or colour coded finish.

$1,370AUD Color Flat Sheet colour coded finish Flat Sheet Black powder-coat finish Flat Sheet painted finish Flat Sheet mill finish

  

Jerry can holderAluminium Tig welded Jerry can to be mounted on the rear wall.

$650AUD QuantityColor Flat Sheet painted finish Flat Sheet Black powder-coat finish Flat Sheet mill finish Chequer plate finish Chequer plate painted finish Chequer plate Black powder-coat finish Colour coded painted finish

  

Under tray water tankAvailable in a 60L or a 80L poly tank options, this water tank is mounted beneath the tray/canopy at the front. Filling and venting is at the front P/S of the canopy and the tap can be mounted at the front of the P/S mudguard or rear P/s of canopy.

$1,391AUD Tank size 60L 80L 120L 160L 200L

  

Wheel arch flares (per pair)Designed to cover wider tyres the wheel arch flares can be set at +20mm to +80mm outside the external width of the canopy. Great for giving that tough look to your vehicle.

$985AUD Black powdercoated finish Colour coded painted finish

  

Under tray slide out drawerAluminium slide out under tray drawer. Sealed and lockable. Lengths available up to 1800mm on request.

$1,320AUD

  

External rear shelf/ledge External rear shelf can be made in multiple sizes/lengths. Commonly used to sit spare tyres on Handy Tip: The fixed spare tyre option comes with its own lower support bracket so the external rear shelf is not required solely for spare tyres.

$1,500AUD Quantity

  

Drop down spare wheel carrier (each)Designed to make loading and unloading of the spare tyre that much easier, the drop down carrier lowers the tyre to a easier position to handle.

$1,150AUD Quantity

  

Tub removalIf you require us to remove your current style side tub or tray to make way for your new canopy, we will remove the item and you are welcome to collect it from our premises. Alternatively will can dispose of it for you.

$750AUD

  

Fixed external wheel carrier (each)Spare wheel carrier. Sold individually.

$950AUD Quantity

  

Extras

Doggy doorOur sealed dog door detaches, allowing a mesh window for your fury friend. When pup is inside, the door easily clips inside the roof of the canopy, for the best use of space.

$880AUD

  

Extra door Additional side canopy door

$1,500AUD

  

Rear doorRear canopy door. Note: window is separate option

$1,500AUD

  

WindowAvailable for front, rear and side doors in the below options.

$550AUD

Style	Quantity	Price
Fixed		$550.00AUD
Sliding or windout		$750.00AUD

  

Boat loaderOur canopies are designed to handle roof top tents or boat loaders. We can supply and install Almac boat loaders - pricing will vary depending on specs

$4,200AUD

  

Walk-off legsManual legs designed for our bolt-on canopies

$2,000AUD

  

Integrated floor For bolt-on canopies only - a separate integrated floor means no need to empty the canopy before removing it from the tray.

$950AUD

  

Air vents Included in the base price of any canopy, our vents are $330 if sold separately. These vents pressurise the canopy, leaving the interior dust free.

$330AUD

  

External options

Roof carry bars (each)Built from our 50x50 slotted extrusion these roof bars bolt to the roof extrusion and have their own 'strut nut' slot built into them. Sold individually. Handy tip: These are great for mounting roof top tents or solar panels. We can mount the solar panels between each roof bar, below the top face so these can still be used to carry loads.

$130AUD QuantityColor Mill Finish Black powder-coat finish

  

Heavy duty roof rack (extends over cab)Tig welded from our 50x50 slotted extrusion these heavy duty racks are very practicable. With heavy duty tie down points down each side you can also slide eyelets around the slotted frame. Available in custom sizes. Mill or powder-coat finish. (Please advise if you required solar panels to be built/flush mounted into this rack)

$1,700AUD Color Black powder-coat finish Mill finish

  

Hook on table (inc ceiling storage mounts)

$560AUD

  

Infill panel with step treads between cab and canopyDesigned for vehicles with chassis extensions this is a great option to fill the void between the lower cab and front of the wheel arch.

$630AUD Colour coded painted finish Flat sheet mill finish

  

Rear wheel visorNot only do these visors add a premium finish to your canopy, but they stop leaves and other debris getting in and caught between your wheels and the canopy.

$1,075AUD Colour coded painted finish Flat sheet mill finish

  

Sliding glass windows (each)

$525AUD Quantity

  

Fixed glass windows

$330AUD Quantity

  

Internal Fitout

Internal “gadgets panel” (mesh) on end wallThese are great for multi purpose use such as tie down points and mounts for hanging organiser bags. Built from aluminium security mesh, framed in aluminium extrusion and TIG welded these panels are light yet practicable. Available internally on the front or rear wall and in full width or half width options.

$800AUD Quantity

  

Small partitions (for protection of fridges etc)These internal partitions are a combination of sectioning of areas of the canopy whilst keeping the divider lightweight and practicable. The small partitions are great for around fridges or dividing areas to suit your ideal layout. Made from aluminium security mesh or flat sheet, framed in aluminium extrusion and TIG welded. These are made in custom sizes to suit your layout.

$650AUD Quantity

  

Ceiling rack (mesh mounted to ceiling)Ceiling racks are made from aluminium security mesh OR flat sheet aluminium, framed with aluminium extrusion and TIG welded. These can be up to 2400mm long x 1200mm wide. Ceiling rack height is determined in the final stages of designing the layout.

$750AUD Quantity

  

Internal partition (mesh or solid) full widthThese large internal partitions are a combination of sectioning of areas of the canopy whilst keeping the divider lightweight and practicable. These are great for dividing large areas in the canopy to suit your ideal layout. Made from aluminium security mesh or flat sheet, framed in aluminium extrusion and TIG welded. These are made in custom sizes to suit your layout. These can be positioned front to back or side to side in the canopy.

$950AUD Quantity

  

Internal aluminium drawer (chequer plate)Our lightweight design uses our own nylon slide system and aluminium extruded frame. Enclosed with aluminium chequer plate finish.. These can be up to 600mm wide per drawer.

$750AUD Quantity

  

Internal aluminium drawer (carpeted finish)Our lightweight design uses our own nylon slide system and aluminium extruded frame. Enclosed with aluminium sheeting and a marine carpet finish. These can be up to 600mm wide per drawer.

$890AUD Quantity

  

Internal insulationWe use a 7mm think Thermal brane insulation finished in marine carpet for added thickness and a premium finish. This is great for keeping the heat down in summer (especially for fridges)! (Handy tip: If you plan on sleeping in your canopy this is a great option)

$1,500AUD

  

Slide-out wall kitchen One of our favourite canopy options, our Patented kitchen design is practical in height, use of space, ease of use and storage! Available in black or white.

$3,450AUD Slide-out Wall Kitchen With Aluminum carpet surround With Westinghouse dual induction cooker With Aluminum carpet surround AND Westinghouse dual induction cooker

  

Drop down fridge slide (POA)We offer a choice of MSA or Clearview drop slides to suit your fridge. We can also supply fridges on request. Price may vary depending on fridge slide size and model + installation fee.

$1,150AUD

  

Outboard motor storage slideOur outboard motor slide is a great option for easily storing the boat motor inside your canopy. These can be made as a solid fixture or a removable item. Available in a short shaft and long shaft option. These are also available for purchase separately.

$825AUD

  

Electrical

Accessories outlet (inc. wiring)Includes and Dual USB and a 12v cig outlet inside the canopy. Connected to either your start battery or aux battery if applicable.

$225AUD

  

Internal LED light (each inc. wiring)We use a LED solid strip light that is inter-changeable between white and orange (for bugs). These lights also have a dimming switch so you can get the mood just right.

$325AUD Quantity

  

Electrical panel (mill finish)Putting electrics in your canopy? These are ideal for mounting those important electrical goodies too. Available in custom sizes on request. Need electrical work done on your canopy? See our options further down!

$150AUD Quantity

  

Electrical panel (carpeted)Putting electrics in your canopy? These are ideal for mounting those important electrical goodies. Available in custom sizes on request. Need electrical work done on your canopy? See our options further down!

$180AUD

  

TT - Ceiling hung battery box or cabinet These are an excellent option when space is critical. Built to free up every last inch of floor space these battery boxes are custom made to suit your canopy when using 'Tactical Tourers' for your electrical package. These are to suit Lithium battery packages only. (Handy tip: These are a great choice when combined with our slide out wall kitchen for maximising space!)

$880AUD

  

Battery box floor mountedAvailable in custom sizes these floor mounted battery boxes are a great option to house dual battery systems and electrical gear. Made from a aluminium frame, enclosed in aluminium sheet and finished off in marine carpet for a premium finish.

$515AUD

  

240 inlet plug (fitted only)

$440AUD

  

Fridge**Price will depend on style, size and brand of fridge. Whether it's a stand-up to save on weight or a chest fridge on a slide, we have you covered.

$1,500AUD

  

Door warning alarms Door 'Open' warning alarms. Price is for 2 door canopy.

$650AUD

  

Remote central locking Available in a stand alone system for the canopy or inter-grated to work with the vehicles central locking system (some model cars excluded) Available for the canopy gull wing and rear canopy doors only.For two doors ($375 for additional door)

$850AUD Quantity

  

Rear view camera systemOur full time rear view camera systems are a great replacement for the now redundant rear view mirror. We use 'Safety Dave' camera systems and have single and multiple camera input options.

$900AUD

  

Standard rear camera refit Does your vehicle come standard with rear sensors and camera? We have you covered. We'll refit the camera and senors seamlessly for a premium finish.

$550AUD

  

Electrical packages

Enerdrive Lithium Packages (POA)We offer a range of battery packages which are purpose build and installed into your canopy. For example one of our most popular Enerdrive system below: 1x B-TEC G2 200A Enerdrive Lithium battery 1 x Enerdrive 40A DCDC charger 1 x Enerdrive 40A AC charger 1 x EPRO battery monitor 1 x CMS 240 Inlet wire (RCD+GPO) 1 x 2000w Enerdrive AC transfer inverter w/RCD 2 x 150w Enerdrive mono solar panels 2 x KORR internal Orange/White dimming lights 2 x External rear work lights 1 x 12 way fuse box 2 x USB + Anderson plug + CIG outlets holder 2 x USB outlets 2 x CIG outlets 1 x Fridge connection to suit your fridge 2 x rocker switches for rear lights and water pump 1 x Water pump (1 x tap at rear of toolbox + 1 x tap gravity fed at front of mudguard)Supply and installed. Multiple layout options available. (Optional Simarine monitoring system upgrade available) Prices starting from:

$10,000AUD

  

Redvison Lithium System (POA)We offer a range of battery packages which are purpose build and installed into your canopy. For example one of our most popular REDARC system below:1 x Redarc Redvision Vehicle Management System 1 x Redarc Battery Management System 12V/24V 1 x Redarc 2000W Pure Sine Wave Inverter 1 x Redarc Voltage Inverter remote control (on/off) 5 x In Line Fuse Holder Midi 1 Way 150A 1 Pce 2 x Redarc Solar Panel Monocrystalline 180W 1 x Enerdrive B-TEC 200amp / 12v LiFePO4 Battery Gen2 2 x Panel Mount 50A Anderson Plug Holder and 2 Socket Holes 2 x LED rear work lights switched from canopy 1 x 100 Safety hub Supply and installed, multiple layouts available.Prices starting from:

$10,000AUD