What gauge of wire has been run to the window?
Is there power to the wire or has it just been "Roughed-In" without power?
Is the wire run from the window to a centralized point?
What is the largest window opening size?
What product will be used?
One (1) Motor = One (1) Fabric Movement = One (1) Dedicated Line
2 Strand Wiring = Power For One (1) Motor
4 Strand Wiring = Power For Two (2) Motors
24V Low-Voltage Wiring = Positive/Negative
110V High-Voltage Wiring = Positive/Negative/Ground
Wiring connected to each motor individually then run to centralized point
Each wire is attached to the Distribution Panel via dedicated ports
Distribution Panel is plugged into a dedicated electrical outlet with a "Nema-Plug" (Ordered Separately) or wired directly via licensed electrician to the electrical panel
Transformer is attached to the end of each wire
Each transformer is plugged into a power bar
The power bar is plugged into a dedicated electrical outlet
Each wire is attached to the Tabe-Top Transformer via screws on the back
Table-Top Transformer is plugged into a dedicated electrical outlet
Licensed Electrician runs direct power to each window
Licensed Electrician connects wire directly to each motor
Wago or Somfy quick connectors recommended for safest connection
Junction Box may be required - Check local electrical code