Panther Industries Project Survey

  • PANTHER INDUSTRIES PROJECT SURVEY

    Please complete the following survey so that we may provide you with the most accurate quote possible for your labeling automation system.

  • LABEL SPECIFICATIONS & SIZING

    1. Labels must be die-cut with gap for label sensor. Labeling automation systems cannot run/index butt-cut labels.

    2. Label liner without perforations are preferred, as perforations are typically not compatible with labeling automation systems.

    3. Eye-mark required for clear labels, where applicable.

    4. For printing, labels must be Thermal Transfer or Direct Thermal compatible.

    5. Label samples must be provided to Panther Industries no less than 10 business days prior to requested ship date.

    6. All Panther Industries systems will operate with labels wound in or out.
      We recommend labels wound out, as shown here.

  • LABEL SPECIFICATIONS

  • Image field 59

  • HOW TO DETERMINE YOUR LABEL SIZE

  • Image field 63

  • WHAT IS YOUR LABEL SIZE?

  • Image field 70
  • Rows

  • PRINT AND APPLY or PREPRINTED LABEL STOCK

    Is your label stock blank with content printed from a print engine OR is the label stock already preprinted?

  • PRINT ENGINE PREFERENCE

    For printed content, please indicate print engine manufacturer preference for your labeling automation system (check one):

  • PRINT RESOLUTION

    For printed content, please indicate desired print engine print resolution (check one):

  • COMMUNICATION PROTOCOL

    For additional resources supporting our host interfacing signals, please reference the following support page: Host Interfacing Signals

    Please indicate which communication protocol you are using (check one):

  • PREPRINTED LABEL STOCK

    If your label stock is preprinted, what is the orientation of the content on the label roll (check one)?

  • Image field 84
  • Image field 85
  • Select Option from Images Above

  • LABEL LOCATION

    Please indicate where the label will be appliled to the item (check all that apply):

  • Image field 97
  • Select Location(s) from Image Above

  • LABEL APPLICATION ORIENTATION

    Please indicate the orientation of the label and imprint after the label is applied to the item (check all applicable options):

  • SIDE/FRONT APPLICATION

  • Image field 185
  • How is the Label Oriented on the Side/Front?
  • Image field 103
  • Select Label Imprint Orientation from Image Above

  • TOP/BOTTOM APPLICATION

  • Image field 187
  • How is the Label Oriented on the Top/Bottom in relation to direction of travel?
  • Image field 104
  • Select Label Imprint Orientation from Image Above

  • LABEL APPLICATION ACCURACY

    What is the desired label placement accuracy?

  • LABEL APPLICATION POSITION

    Please indicate the specific location of the label on the item (all dimensions in inches):

  • SIDE APPLICATION

  • Image field 119
  • Centered Label Options

  • TOP or BOTTOM APPLICATION

  • Image field 120
  • Centered Label Options

  • SIZE AND WEIGHT OF ITEM(S)

    Please indicate the dimensions of your smallest and largest items (all dimensions in inches):

  • SMALLEST ITEM

  • Image field 131

  • LARGEST ITEM

  • Image field 136

  • ADDITIONAL ITEM SIZES TO BE AWARE OF

  • Browse Files
    Cancelof

  • PRODUCT WEIGHT

  • SYSTEM LOCATION AND CONVEYOR SPECIFICATIONS

    Please indicate the specific dimensions of the conveyor system and placement of labeling system (all dimensions in inches):

  • Image field 151
  • IMPORTANT! Labeling System Position*
  • IMPORTANT! Operator Interaction*

  • ADDITIONAL CONVEYOR SPECIFICATIONS

  • Conveyor Type*
  • Product Motion*
  • Product Guides Available?*
  • Product Pitch or Gap
  • Product Spacing Consistency*
  • Product Environment*
  • 0/2000

  • SUPERSTRUCTURE

  • Will Your Labeling System(s) Require a Superstructure for Mounting Above a Conveyor?

  • SYSTEMS PER SUPERSTRUCTURE

    Please indicate the number of labeling systems required per superstructure.

    Note: Superstructure lengths shown are for tamp applicators. Other applicator solutions may require a different overall length.

  • Image field 179
  • Image field 209
  • Image field 213
  • Will Your Superstructure Require a Slide for the Labeling System, Providing an Operator with Better Ergonomic Access and Safer Maintenance/Service Interaction?*

  • SUPERSTRUCTURE DETAILS 

    Please indicate the following related to a superstructure that may accompany the conveyor and labeling system (all dimensions in inches).

    Standard superstructure widths are 40", 50", and 59". Depending on the width of your conveyor, combined with the distance required between it and the structure, a custom superstructure width may be necessary.

  • Image field 206

  • Note: The applicator rack tube extends above the superstructure height and is variable in length, depending on the length of the applicator rack.

  • Do you have any overhead obstructions that would impact with the superstructure installation?*
  • Product Flow Direction*
  • Upload Files
    Cancelof

  • PROJECT SURVEY SUBMISSION 

    Please click the "Submit" button below to send us your project survey information.

    A Panther account manager will be back in touch with you with any additional questions related to the information you have provided.

  • Should be Empty: