Step 1/5
Customer Information
1. The name of the fitter
*
First Name
Last Name
2. The fitter's email
*
3. The Name of the Customer
*
First Name
Last Name
4. The Email of the Customer
*
5. Company Name
*
6. Serial No.
*
7. Machine Type
*
8. General assessment of the condition of the plant
*
Good
Middel
bad
Step 2/5
Checklist review
9. Pull and turn, check wheels for wear, and whether the chain runs straight on the wheels.
10. Check chains for wear and whether they are too long (may only be shortened when they are cold). The carrier must sit in parallel if there are two chains in the machine
11. Gear motors, listen for noises and see if they are leaking oil
12. Pumps on the washing machine, listen for noises and check pump pressure and for leaks
13. Nozzles, check that they are seated correctly so that the water jet is across the boxes and they are not stopped
14. Rinse nozzles, check that they are not stopped. They can do this easily, as they only have a 1.1 mm hole
15. Nozzle tubes, check if they are seated correctly, with the correct numbers together and the correct path
16. Cuffs and end plugs at each end must also be inspected
17. Fan; check for sufficient air pressure and uniformity throughout the length of the mouthpiece
18. Tighten bolts and nuts
19. Check if the bearing is worn
20. Check cylinder / hoses for leaks and wear
21. Lubrication
22. Checking pneumatic connections and hoses
23. Control review of cleaning of the machine / div
24. Review of operator and maintenance routines
25. Review of spare parts stock and recommended replenishment
26. Safety check of light barriers, safety switches, emergency stop, machine stop, line stop
27. Risk points where you can get stuck, warning statements, safety coverings (conversion / extension required)
Step 3/5
Replaced parts
28. Are there any parts that have been replaced?
29. Spare parts for which offers must be sent
Step 4/5
Additional notes
30. Enter other notes from the review here
31. Add any. relevant pictures here
Upload billeder
Cancel
of
32. Date of next visit
-
Dag
-
Måned
År
Dato
Signatur (Fitter)
*
{1 fitter}
Service approved by customer
*
{3 customer}
Save
Indsend
Should be Empty: