SBSR CAPABILITY AND CAPACITY ASSESSMENT SURVEY QUESTIONNAIRE

Good day, Respondent!

The Shipbuilding and Ship Repair (SBSR) Capability and Capacity Assessment aims to determine the performance of the SBSR sector of the Philippines by evaluating the competence of shipyards located in the country. Shipyard assets such as facility, machinery, equipment, and workforce are used to assess their overall capacity. Similarly, their capability is ascertained by the number and sizes of ships that they are able to produce on average. Shipyards’ research and development initiatives and services other than shipbuilding also play a role in establishing their capability SBSR entities

Republic Act No. 9295 otherwise known as the 'Domestic Shipping Development Act of 2004' mandates the MARINA to conduct an annual capacity and capability assessment of all registered SBSR entities to build new vessels below 500 GT. Under RA 9295, an evaluation is required to determine if MARINA-registered shipyards are capable of producing a ship below 500 GT in quantities sufficient to meet the domestic demand. The assessment also falls under the objective of reassessing the capability status of shipyards and to appraise quality in order to identify room for improvement in their system so as to coincide with the MARINA’s advancement goals.

Accomplished by:*

Title (Ms., Mr., Engr., Atty., etc.)First NameMiddle NameLast NameName Extension (Sr., Jr., etc.)
Position*
(E.g. General Manager, Liaison Officer, etc.)
Phone Number*
Working E-mail Address*
example@example.com
Date Accomplished:*

MonthDayYear
Date
Administered by:

GENERAL INSTRUCTIONS
Check each box to confirm that you have read each instruction.*

Each company may accomplish this survey questionnaire only once.Review your answers before proceeding to the next page.If the required field (*) does not apply, type 'N/A'.For Part II and Part III, you may upload an additional list for the fields provided if the tables are not sufficient. The recommended format is pdf.
ESTIMATED TIME OF COMPLETION: 1 hr

I. COMPANY PROFILE
Name of Shipyard*
Registered under:*
Classification*
Address of Shipyard*
Facility Ownership*
Location (if applicable)

PEZASBMAOthers (please specify)
Owner/Manager/Contact Person*

Title (Ms., Mr., Engr., Atty., etc.)First NameMiddle NameLast NameName Extension (Sr., Jr., etc.)
Phone Number*
Working E-mail Address*
example@example.com
MARINA License*
Local Business Permit*
Environmental Compliance Certificate (ECC)*

II. YARD PLAN AND EQUIPMENT CAPABILITY

Instruction: List all facilities and their corresponding details. Upload additional sheet if necessary.

A. MAIN YARD FACILITY*

	Facility¹	Facility ID	Acquisition	Max. Length (m)	Max. Beam (m)	Water Depth (m)	Capacity (GT)	Utilization²	Year Acquired
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

¹FACILITY: Slipway; Marine Railway; Graving Dock; Floating Dock; Synchrolift/Lift dock; Building Yard; Launch Way; Quay/ Pier; Others (please specify)

²UTILIZATION: Shipbuilding; Ship Repair; SBSR; Co-Drydocking; Others (please specify)
Upload additional sheet for MAIN YARD FACILITY

Cancelof

B. DRY-DOCKING AND LAUNCHING SYSTEM*

	Ship Carriage¹	Dimension - length (m)	Dimension - width (m)	Load Capacity (ton)	Model/Make	Year Acquired
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

¹SHIP CARRIAGE: Cradles & Rails; Cradles & Rollers; Air Bags/Inflatable Rubbers; Platform Lift; Others (please specify)
Upload additional sheet for DRY-DOCKING AND LAUNCHING SYSTEM

Cancelof

B.1. PULLING MECHANISM*

	Pulling Capacity (ton)	Number	Model/Make	Year Acquired
Winches
1.
2.
3.
4.
5.
Pulleys
1.
2.
3.
4.
5.
Tow Trucks
1.
2.
3.
4.
5.
Tugs
1.
2.
3.
4.
5.

B.1.1. OTHER PULLING MECHANISM (if any)

	Type	Pulling Capacity (ton)	Number	Model/Make	Year Acquired
1.
2.
3.
4.
5.

Upload additional sheet for PULLING MECHANISM

Cancelof

B.2.1. OTHER LIFTING MECHANISM (if any)

	Type	Lifting Capacity (ton)	Number	Model/Make	Year Acquired
1.
2.
3.
4.
5.

Upload additional sheet for LIFTING MECHANISM

Cancelof

B.3.1. OTHER TRANSFER SYSTEM (if any)

	Type	Dimension - length (m)	Dimension - width (m)	Load Capacity (ton)	Model/Make	Year Acquired
1.
2.
3.
4.
5.

Upload additional sheet for TRANSFER SYSTEM

Cancelof

C. WORKING AREAS AND WORKSHOPS: *

	Cranage¹	Dimension - Height (m)	Dimension - Radius (m)	Lifting Capacity (ton)	Number	Model/Make	Acquisition	Year Acquired
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

¹CRANAGE: Gantry; Jib; Crawler; Floating/Barge; Overhead; Others
Upload additional sheet for WORKING AREAS AND WORKSHOPS

Cancelof

C.1. WORKING AREA*

	Area (sqm)	Remarks	Year Acquired
Office Area
Assembly Area
Sandblasting Area
Storage Area
Land Berth/Transfer Area

C.1.1. OTHER WORKING AREA (if any)

	Type	Remarks	Year Acquired
1.
2.
3.
4.
5.

Upload additional sheet for WORKING AREA

Cancelof

C.2. WORKSHOP*

	Area (sqm)	Remarks	Year Acquired
Fabrication Area/Hull Shop
Machinery Shop
Pipe Shop
Carpentry Shop
Outfitting Shop
Electrical Shop
Paint Shop

C.2.1. OTHER WORKSHOP AREA (if any)

	Type	Remarks	Year Acquired
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Upload additional sheet for WORKSHOP

Cancelof

C.3. WELDING MACHINE*

	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make	Year Acquired
SPOT
SMAW
FCAW
TIG
MIG
Plasma
Gas
CNC (Computer Numerical Control)

C.3.1. OTHER WELDING MACHINE (if any)

	Type	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make	Year Acquired
1.
2.
3.
4.
5.

Upload additional sheet for WELDING MACHINE

Cancelof

C.4. CUTTING MACHINE*

	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make	Year Acquired
CNC/Plasma
Laser
Waterjet
Oxy-acetylene
Oxy-fuel

C.4.1. OTHER CUTTING MACHINE (if any)

	Type	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make	Year Acquired
1.
2.
3.
4.
5.

Upload additional sheet for CUTTING MACHINE

Cancelof

C.5. LATHE/TURNING MACHINE*

	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make (specify if CNC)	Year Acquired
Engine
1.
2.
3.
4.
5.
Turret
1.
2.
3.
4.
5.
Speed
1.
2.
3.
4.
5.
Special Purpose
1.
2.
3.
4.
5.

C.5.1. OTHER LATHE/TURNING MACHINE (if any)

	Type	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make	Year Acquired
1.
2.
3.
4.
5.

Upload additional sheet for LATHE/TURNING MACHINE

Cancelof

C.6. DRILL PRESS/MACHINE*

	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make (specify if CNC)	Year Acquired
Column/Upright
Radial
Sensitive
Special Purpose

C.6.1. OTHER DRILL PRESS/MACHINE (if any)

	Type	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make	Year Acquired
1.
2.
3.
4.
5.

Upload additional sheet for DRILL PRESS/MACHINE

Cancelof

C.7. MILLING MACHINE*

	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make (specify if CNC)	Year Acquired
Column/Universal
Plain/Planer
Fixed Bed
Special Purpose

C.7.1. OTHER MILLING MACHINE (if any)

	Type	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make	Year Acquired
1.
2.
3.
4.
5.

Upload additional sheet for MILLING MACHINE

Cancelof

C.8. BENDING MACHINE*

	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make (specify if CNC)	Year Acquired
Plate Roll
Pipe Bending
Special Purpose

C.8.1. OTHER BENDING MACHINE (if any)

	Type	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make	Year Acquired
1.
2.
3.
4.
5.

Upload additional sheet for BENDING MACHINE

Cancelof

C.9. GRINDING MACHINE*

	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make (specify if CNC)	Year Acquired
Cylindrical
Surface
Utility
Special Purpose

C.9.1. OTHER GRINDING MACHINE (if any)

	Type	No. of Owned units	No. of Outsourced units	Speed (mm/sec)	Feed (mm)	Model/Make	Year Acquired
1.
2.
3.
4.
5.

Upload additional sheet for GRINDING MACHINE

Cancelof
D. OTHER SERVICES: Check all services that you offer.*

Underwater SurveyDesign and Engineering ServicesOffshore/Industrial Structure FabricationModular/Block Structure FabricationFPSON/AOthers (please specify)
Please specify all Marine or CNC software that you use. Click on + to add new type of software.

B.2. LIFTING MECHANISM*

	Lifting Capacity (ton)	Number	Model/Make	Year Acquired
Hydraulic Jack
1.
2.
3.
4.
5.
Air Compressor
1.
2.
3.
4.
5.
Fork Lift
1.
2.
3.
4.
5.
Travel Lift
1.
2.
3.
4.
5.
Cranes
1.
2.
3.
4.
5.
Chain Blocks
1.
2.
3.
4.
5.

B.3. TRANSFER SYSTEM*

	Dimension - length (m)	Dimension - width (m)	Load Capacity (ton)	Model/Make	Year Acquired
Bogie Train
1.
2.
3.
4.
5.
Transporter
1.
2.
3.
4.
5.
Conveyor
1.
2.
3.
4.
5.
Travel Lift
1.
2.
3.
4.
5.

III. OPERATIONAL CAPABILITY

Instruction: Provide all data from 2019 to 2021. Upload additional sheet if necessary.

A. SHIPBUILDING*

	Hull ID/ Ship Name	Ship Type¹	Material²	Size (GT)	L x B x D (m)	Age	Lead Time	Estimated Cost	No. of Workforce	Construction Type³	Year Completed
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

¹SHIP TYPE: Passenger Ferry; Passenger/Cargo; Cargo; Tanker; Barge; Tug; Fishing; Others (please specify)

²MATERIAL: Steel; Wood; FRP; Aluminum; Others (please specify)

³CONSTRUCTION TYPE: New building; Modification; Alteration; Conversion; Re-building; Others (please specify)
Upload additional sheet for SHIPBUILDING

Cancelof

B. SHIP REPAIR*

	Ship Name	Ship Type¹	Material²	Size (GT)	L x B x D (m)	Age	Lead Time	Estimated Cost	Repair Type³	Repair Location⁴
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

¹SHIP TYPE: Passenger Ferry; Passenger/Cargo; Cargo; Tanker; Barge; Tug; Fishing; Others (please specify)

²MATERIAL: Steel; Wood; FRP; Aluminum; Others (please specify)

³REPAIR TYPE: Re-plating; Overhauling; Electrical; Navigational; Communication; Others (please specify)

⁴REPAIR LOCATION: Land Berths; Dry-docking Facility; Quay; Anchorage; Others (please specify)
Upload additional sheet for SHIP REPAIR

Cancelof

C. DRY-DOCKING*

	Ship Type¹	Ship Size Range	Dry-docking Time	Undocking Time	Turn-around Time
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

¹SHIP TYPE: Tanker; Carrier; Cargo, Passenger; Fishing; Ferry, etc.

D. MANAGEMENT SYSTEMS*

	National/International Standard	Certified	If not certified, do you have documented procedures?	Are you compliant with national/international conventions/rules and regulations?
Quality
Safety and Health
Environment
Security
Others

IV. RESEARCH AND DEVELOPMENT CAPABILITY

Instruction: Provide all information needed. Skip the table if no research and development (R&D) projects were conducted from 2019 to 2021.

	Activity/Study	Cost (PHP)	Innovation	Consultancy	Percentage Share	Duration (Year to Year)
Research
Development

Do you plan to introduce new technology in the future? If yes, check all that apply.*

Three-Dimensional (3D) Printing TechnologyShipbuilding RoboticsFree Ballast Ship DesignLNG-Fueled EngineSolar-powered and Wind-powered ShipsIntegrated Electric PropulsionGreen Shipyard and ShipsN/AOthers (please specify)

V. MATERIAL CAPABILITY

Instruction: List all materials and parts that are available as of 2021.

A. RAW MATERIALS AND PARTS*

	Materials/Ship Components¹	Acquisition	Order Lead Time	Constraints	Estimated Cost	Percentage of Production Cost²	Stock Availability
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

¹MATERIALS/SHIP COMPONENTS: Steel Plate; Marine Spare Parts; Machinery; Equipment; Others (please specify)

²PRODUCTION COST: Refers to the total cost of manufacturing products and includes the cost of raw materials, labor costs, and other costs incurred at the manufacturing site. (e.i. 100%, 75%, 50% or 25%)

B. MATERIALS AND PART SOURCES*

	Materials/Ship Components¹	Source	Country (if acquired from foreign company)	Percentage of Imported Materials per Source	Supplier	Duty, Tax, and VAT	Year Acquired
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16
17.
18.
19.
20.

¹MATERIALS/SHIP COMPONENTS: Steel Plate; Marine Spare Parts; Machinery; Equipment; Others (please specify)
B.1. MOST COMMONLY USED MATERIALS AND PARTS: List three (3) in order of the most commonly used materials and parts in your shipyard. *

VIII. SHIPYARD BUSINESS DEVELOPMENT STRATEGY

Instruction: Drag each item to the top in order of the most important factor, as appropriate.
A. Rank the following strategic directions of the shipyard.*
B. Rank the the following factors that may increase the competitiveness of your shipyard in the localand/or foreign market.*
C. Rank the following measures that your shipyard plans to implement in the near future to reduce energy costs and expenses on Green Shipyards.*
D. Rank the following government incentives that would be the best for your shipyard.*
E. Provide suggestions/recommendations that would further enhance the capabilities of local shipyards and promote the Philippine SBSR sector.*
Should be Empty:

	No. of Local Permanent Personnel	No. of Foreign Permanent Personnel	No. of Local Contractual Personnel	No. of Foreign Contractual Personnel	Level of Qualification	No. of Male	No. of Female	Remarks
Managerial
Administrative
Technical
Skilled Workers
Semi-skilled Workers
TOTAL NUMBER OF PERSONNEL

	Specific Trade Area	No. of Sub-contractor	MARINA-Registered	Remarks
Design & Engineering (including ship model testing)
Steel Work Production
Ship Fitting
Ship Outfitting
Outfit Manufacturing
Machinery
Others

GENERAL INSTRUCTIONS

I. COMPANY PROFILE

II. YARD PLAN AND EQUIPMENT CAPABILITY

III. OPERATIONAL CAPABILITY

IV. RESEARCH AND DEVELOPMENT CAPABILITY

V. MATERIAL CAPABILITY

VI. FINANCIAL CAPABILITY

A. OPERATING PROFIT OF THE SHIPYARD

A.1. 2020 ACTUAL RESULTS

A.2. 2021 ACTUAL RESULTS

A.3. 2022 EXPECTED RESULTS

A.4. 2023 FORECAST

B. CLIENTELE

VII. MANAGEMENT AND PERSONNEL CAPABILITY

C. GENDER AND DEVELOPMENT (GAD). MARINA Memorandum Cicular Nos. 2018-02 and SR-2019-01 require SBSR entities to uphold gender equality in the workplace. Provide all answers truthfully.

VIII. SHIPYARD BUSINESS DEVELOPMENT STRATEGY