Trailer Move Checklist
Production Name
*
Destination
*
MoPho Name
*
Please Select
MoPho1 (NY)
MoPho2 (LA)
MoPho3 (ATL)
Marathon
Trailer Operator Name
*
Please Select
Pasquale Greco
Rick Shine
Travis Reinke
Dominic Antonelli
Graeme Williams
Driver Name
*
Please Select
Ty Taylor
Phil Barker
Travis Reinke
Daniel Palmer
Other
Driver Email
*
Please verify each INTERIOR task is complete.
*
Power on Master Contol Computer and Open Xangle to update the license (in the rate case internet isn’t available at the location)
Turn Master Power Switch off
Raise Stabilizers (verify visually)
Lock Master Control (wheels/slide)
Secure Master Control and Stools with ratchet strap
Secure 360CC to wall mount
Bungee rig door in the open position (TIGHT - MoPho1/2) or latch rig door closed (Marathon)
Save work and shutdown computer
Power off Master Control UPS
Pack monitor and stand (monitor goes in top right cabinet near entrance) MIND THE SCREEN!
Lay down and secure stands, apple boxes and any other item that may tip over in transit
Power down MiFi and pack away in MC drawer
Set AC to 72 or Heat to 68 (auto mode) and leave on
Remember runner drive and any other media for backup
Check all rig power and interior lights have been shut off including Master Control
Power off Raven/Godox flash transmitter in rig
Unplug and Secure Cell Extender Base and Antenna
Place Floor Moisture Protection (Marathon Only)
Please verify each EXTERIOR task is complete.
*
Close Awning and Check Alignment
Retract Exterior Step(s)
Power off all lights unless otherwise directed
Leave exterior camlock power on unless directed otherwise
Retract Levellers and Visually Verify
Close and lock all doors
Hook-up trailer to truck and secure hitch
Connect Trailer Plug and verify all trailer lights are working (turn signals, brake lights, running lights (turn headlights on in truck to verify side lights are working)
Connect chains from trailer to truck (cross)
Secure Trailer safety brake cable separate from chains using a carabiner.
Turn Air-Ride power on and turn valve to Raise. After the compressor stops, turn OFF the power switch (MoPho3 Travel only) RELEASE AND TURN OFF WHEN PARKED. Remember to put keys back in lockbox and secure.
Lock all doors and verify
Remove Chocks (only after hitch is securely connected)
Perform Final Walk Around and check all doors before driving off
Grab Steppers (if used)
Place keys in the lockbox - close and lock the lockbox
Install Sway Bars with SCANable hitch (Marathon Only)
Submit
Should be Empty: