Tableaux® Project Questionnaire

Project Questionnaire - For use by authorized Tableaux Trade Program Accounts only.
Project Questionnaire Status*

This is a NEW ProjectThis is an ADDITION to a ProjectThis is a REVISION to a Project
Name of project*
Tableaux Order ID*

Project Questionnaire

Complete the questionnaire by uploading some photos and answering a few questions about how your customer intends to use Tableaux Decorative Grilles in their interior or exterior design/décor project.

A Tableaux Project Advisor will review the information you submit and put together a proposal for you to review with instructions on next steps should you decide to move forward with an order.

COMPLETE (1) QUESTIONNAIRE FOR EACH TABLEAUX APPLICATION
Questionnaire Options*

Skip the "Prepare" Page - I come here often and have what I needShow me the "Prepare" Page - It's my first time, or I haven't done this in a while

Prepare

Every Tableaux Decorative Grille is custom and made-to-order based on your specific project needs. To complete this project Questionnaire, you’ll need to know a few things about the project and have the following ready:

Shipping Address - Where will this order ship if approved? We will need this to calculate shipping.

Application - Where will Tableaux be placed or installed? ? Check out our Lookbook to see the many ways Tableaux can be incorporated into your design/décor.

Photos* - There will be a place to upload photos on the questionnaire. Take photos of the room and space where you intend to place or install Tableaux Decorative Grille(s). Include the following photos:
- Wide shot of the room aimed at the space
- Medium shot with the entire shape of the space
- Closeup shot of the space
*If the space is inside of an art niche, framed-in pass-through, inside of a window frame, or inside of other framed spaces, take additional photos showing the edges and corners of the framed opening where Tableaux will be attached.

Shape - What shape will this be? Depending on the application, the shape may be self-evident when looking at the photos (such as the shape of a window frame). It may not be obvious for other applications such as wall décor.

Size/Measurements* - What are the measurements of each piece? Tableaux can be made in any size you want. You'll need to provide maximum width and maximum height for each piece along with quantity.

*IMPORTANT If you intend to place or install Tableaux inside of a window frame, inside of an art niche, framed-in pass-through, or inside of other framed spaces, be sure to get your measurements from the inside of the framed opening. You'll need to provide multiple width & height measurements at the left, center, right, bottom, middle, top, so that the piece fits the inside of your opening. It's also a good idea to make a drawing of the shape with measurements. Take a photo of your drawing and upload it on this form along with any other related files.

Product Family & Design Style - Which Tableaux Product Family will be best suited to your customer’s design style? Each Tableaux Product Family has distinct material surface characteristic which, along with design and finish color choices, will evoke a certain design style. Learn More about Tableaux Product Families.

Not sure which Product Family is best for your project? Don't worry, a Tableaux Project Advisor will make recommendations based on other questions you answer on this form.

Design Pattern – Which design do you want? Tableaux designers will customize and scale the design you select to match the measurements you provide. You'll have the following options:
- Use a design from the Tableaux Design Library
- Use a design you already have
- Have Tableaux create a custom design for you based on your ideas
Finish Color – What finish color do you want? Your choice of Finish Color adds that final touch. Learn more about Tableaux Finish Colors.

Project Comments – Can you tell us about your intentions or goals for this project? Include any special instructions or additional options you would like us to consider and include in your proposal.

Contact Info
Name of your new project*
A sidemark for reference later
First Name*
Last Name*
Email*
Your proposal will be sent to this email address
Phone*
Company Name*
Where will this be shipped if approved?*

Street Address

Street Address Line 2

CityState / Province

Postal / Zip CodeCountry
Shipping Address Location Type*

ResidenceBusiness
Did this customer come from a "Where to Order" lead Tableaux sent you?*

YesNoNot sure

Application
Where do you intend to place or install Tableaux Decorative Grille(s)?*

Window Décor & TreatmentsArt Niches & Pass-ThroughsDecorative Accents & Wall ArtCeiling Décor & TreatmentsPartitions & Room DividersDoors & CabinetryExterior/Outdoor Design & Décor

Photos

Photos of the space where you intend to place or install your Tableaux Decorative Grille(s) will help us better understand your project to determine project feasibility and allow us to consult with you about any special requirements you may have.

Take photos of the space where you intend to place or install Tableaux Decorative Grille(s). Include the following:
1. Wide shot of the room aimed at the space
2. Medium shot with the entire shape of the space
3. Closeup shot of the space
Additional Photos & Drawing for Inside Mounts

IMPORTANT - If you intend to place or install Tableaux Decorative Grille(s) inside of an art niche, framed-in pass-through, inside of a window frame, or inside of other framed spaces, be sure to get your measurements from the inside of the framed opening. You'll need to provide multiple width & height measurements at the left, center, right, bottom, middle, top, so that the piece fits the inside of your opening.

It's also a good idea to create a drawing of the shape with measurements then take a photo of your drawing and upload it below along with your other photos. You can download and print a Measure Sheet w/grey squares or a Measure Sheet w/grey dots for this use if needed.
Upload your photos and drawings*

Supported file formats/extensions include jpg, jpeg, png, dxf, pdf, docx, dwg, webp, eps, ai, psd
Cancelof

Shape

Your Tableaux Decorative Grille(s) can be made in any shape you want. Select the shape(s) below that best match your space.
Select Window Décor & Treatment Shapes*
Select Art Niches or Pass-Through Shapes*
Select Decorative Accent & Wall Art Shapes*
Select Ceiling Décor & Treatment Shapes*
Select Partition & Room Divider Shapes*
Select Door and Cabinetry Shapes*
Select Exterior/Outdoor Design & Décor Shapes*

Size/Measurements

Your Tableaux Decorative Grille(s) can be made in any shape and size you want. Provide the maximum width and maximum height for each below.
Size/Measurements for Framed Openings

Your Tableaux Decorative Grille(s) can be made in any shape and size you want. Provide the maximum width and maximum height for each below.

NOTE: If you intend to place or install your Tableaux Decorative Grille(s) inside of an art niche, pass-through, or inside of a window frame, be sure to get your measurements from the inside of the framed opening.
Rectangle or Square

Ellipse

Eyebrow

Eyebrow w/Legs

Half Eyebrow - Left

Half Eyebrow - Right

Half Eyebrow w/Legs - Left

Hlaf Eyebrow w/Legs - Right

Circle

Circel w/Center Hole

Half Circle

Half Circle w/Legs

Oval

Quarter Arch - Left

Quarter Arch - Right

Quarter Arch w/Legs - Left

Quarter Arch w/Legs - Right

Cathedral

Cathedral w/Legs

Pentagon

Half Pentagon w/Legs - Left

Half Pentagon w/Legs - Right

Triangle

Half Triangle - Left

Half Triangle - Right

Octagon

Hexagon

Quatrefoil

Trapezoid - Left

Trapezoid - Right

Other/Irregular

Other/Irregular Shape - Upload a drawing of what you are thinking showing measurements*

Cancelof

Design

Tableaux designers will customize and scale the design option you select to match the measurements you provide.
Design Options*

Select a design from the Tableaux Design LibraryUse a design I sendCreate a custom design for me
Tableaux Designs

Check out our Design Library to learn about shapes and design patterns and view our library. Take note of the name of the design you like and select it below. Our designers will customize and scale the design you select to match the measurements you provide.
Select a Tableaux Design*
Select a Design for Tableaux Metal*
Use a design I send

Already have a design you would like to use? Upload it below and our designers will modify and scale your design to match the measurements you provide.
Use this design*

Upload your own design
Cancelof
Create a custom design for me

Send us your ideas and let our designers create a custom design scaled to match the measurements you provide.
Create a custom design for me*

Upload photos or drawings of your ideas for a design
Cancelof

Carving Options
Select a Carving Option*

Non-BeveledSingle-Sided BevelDouble-Sided Bevel

Finish Color

Your choice of Finish Color adds that final touch to your custom Tableaux Decorative Grille(s). Learn More or continue with a selection below when ready.

PLEASE NOTE: COMPUTER MONITORS/MOBILE DEVICE SCREENS RENDER COLORS DIFFERENTLY. WHAT YOU SEE ON YOUR SCREEN IS ONLY A REPRESENTATION AND MAY NOT REFLECT THE ACTUAL APPLIED FINISH COLOR.
About Veneer Finish Colors

Tableaux Veneer uses a substrate made from thin slices of real hardwood walnut sheeting glued onto MDF panels. The walnut veneer is harvested from trees. Since every tree is different, every board of veneer will have varying color and grain pattern variations which will affect the final finish color.
VENEER FINISH - I acknowledge Tableaux veneer will have varying color and grain pattern variations which will affect the final finish color and no two pieces will be exactly alike.*

Yes, I understand
About Organic Finish Colors

*Iron Light Rust, Patina Bronze, and Patina Copper are organic finishes applied using natural chemical processes (e.g. oxidation). Expect some color variations and an overall rougher texture on these finishes.
ORGANIC FINISH - I acknowledge the organic finish color I specified is applied using natural chemical processes (e.g. oxidation), and some color variations and an overall rougher texture is to be expected, and no two pieces will be exactly alike.*

Yes, I understand
Other/Custom Finish Color

Select other/custom finish colors from Sherwin Williams. Note the name and color code and enter it below.
Name of Other/Custom Color*
Other/Custom Color Code*
Other Powder Coat Color

Select other/custom finish colors from Prismatic Powders. Choose only codes that begin with an "P" (Polyester) or "U" (Polyurethane) for UV stable colors. Note the name and color code and enter it below.
Name of Other/Custom Powder Coat Color*
Other/Custom Powder Coat Color Item #*

Solar Screen Options

Tableaux® Decorative Grilles for window décor and treatments can be specified with solar screen fabric pre-installed when ordering Tableaux Faux Iron, Tableaux Veneer, or Tableaux Elements product families. Learn more about Solar Screen Options.
Would you like to add solar screen?*

YesNo
Select a Solar Screen Color*
Screen Openness*

1%3%5%10%

Project Comments

Tell us about any special requirements you have, or additional options you would like us to add to your project proposal.
Project Comments

Revision
First Name*
Last Name*
Email*
Phone*
Company Name*
What would you like to revise? *
Include any/all details of what you want us to revise on your proposal.

That's all the questions we have for now. Click the button below and we'll get to work on your custom Tableaux Decorative Grille proposal!
Name

First NameLast Name
Name

First NameLast Name
Name

First NameLast Name
Should be Empty:

	Piece 1	Piece 2	Piece 3
Bottom Width
Middle Width
Top Width
Left Height
Center Height
Right Height
Quantity
Name this piece (for reference)

	Piece 1	Piece 2	Piece 3
Bottom Width
Center Height
Quantity
Name this piece (for reference)

	Piece 1	Piece 2	Piece 3
Bottom Width
Center Height
Quantity
Name this piece (for reference)

	Piece 1	Piece 2	Piece 3
Bottom Width
Middle Width
Left Height
Center Height
Right Height
Quantity
Name this piece (for reference)

	Piece 1	Piece 2	Piece 3
Bottom Width
Center Height
Right Height
Quantity
Name this piece (for reference)

	Piece 1	Piece 2	Piece 3
Middle Width
Center Height
Center Hole Diameter
Quantity
Name this piece (for reference)

	Piece 1	Piece 2	Piece 3
Maximum Width
Maximum Height
Quantity
Name this piece (for reference)