SCMV Hot Work Permit Request

  • Hot Work Permit Request

  • Hot Work presents real danger of fires starting long after the work is completed from sparks or hot metal slag concealed in cracks, crevices or raining down between partitions. The Hot Worker shall rigorously follow this permit format. It shall be signed by the Hot Worker and by the Superintendent PRIOR to starting any hot work and closed off after the hot work is completed or at the end of each day or work period – whichever shall occur first. Permits shall be issued for each hot work period – including return from a lunch break.

  •  - -

  • Answer the following questions

  • No work starts until training completed.

  • No work can start until the correct CSA/ANSI/WHS approved PPE is worn & worker(s) trained in use.

  • No work starts until corrected.

  • No work will start until ventilation installed and tested.

  • No work can start until the area is cleared of combustible material.

  • No work can start until fumes are properly vented and air confirmed safe by air monitor test.

  • No work shall start until CSA/ANSI approved fire resistant blankets/material(s) laid to protect the surfaces/partitions.

  • Ensure permission is obtained prior to disconnection, removal/cover.

  • 10. Is the fire/spark watch person appointed to watch the Hot Work Worker adequately trained in the following:

  • No work start until corrected.

  • No work start until corrected.

  • No work start until corrected.

  • No work start until corrected.

  • No work start until corrected.

  • No work start until corrected.

  • 11: Are the Fire Extinguishers?

  • No work start until corrected.

  • No work start until corrected.

  • No work start until corrected.

  • No work start until corrected.

  • No work starts until corrected.

  • Hot Work

  • HOT WORK PERMIT REQUESTER STATEMENT AND SIGNATURE
    I have made all statements & answers to the questions accurately and truthfully to the very best of my knowledge and belief. I understand I am personally responsible for the correct conduct of the Hot Work in accordance with the OH&S ACT, Regulation & Code, the equipment manufacturers’ operation instructions & SCMV’s Health and Safety Manual.

  • Clear

  • {HotWorker} Click SUBMIT below to send to the Site Superintendent for Approval.

  • HOT WORK PERMIT PERMISSION

  •  - -

  • I have reviewed the information stated in this permit request and have made such checks and asked such questions as satisfy me that the hot work shall be permitted to proceed subject to any comments

  • Clear

  • {SiteSuperintendent} Click SUBMIT to send Approved HWP to Worker and Firewatch. If you need more information speak directly to {HotWorker} to clarify before approving.

  • FIRE WATCH COMPLETION

  •  - -

  • I confirm that I constantly monitored the hot work area for sparks, hot spots and fire, bewtween the times stated above and completed the fire watch as required.

    I confirm that all areas and conditions are satisfactory to complete the fire watch. (i.e. areas are cold, and giving off no hot spots, sparks, or flames).

  • Clear

  • {FireWatch135} Add fire watch times and click SUBMIT below.

    Do not add your signature until the Firewatch is completed.

  • Should be Empty: