JACK ORDER FORM

For those builders who prefer wooden jacks, or those who are facing the increasing unavailability of plastic jacks, I can offer, on a limited basis, the same wooden jacks that I use in my instruments. I personally make these jacks in my workshop from the finest materials. The jack bodies are cherry with holly tongues or beech with beech tongues. The tongue springs are made from .4mm PEEK monofilament. The jacks are 7" [177.8mm] long x .5" [12.7mm] wide x .150" [3.82mm] thick. 4-40 stainless steel binding or pan head machine screws (not included) can be used for bottom adjusting screws using an .078" drill bit. These holes can only be drilled after the jacks have been cut to their proper length. Jacks are offered in two styles - left plucking and right plucking. If your register plucks to the right, using a right plucking jack will have the damper at the rear of the jack, making it easier to see the plectrum during voicing.

Jack Order Form

Name*

First NameLast Name

Address*

Street Address

Street Address Line 2

CityState / Province

Postal / Zip CodeCountry

Email*

Area Code/Phone Number*

Please enter a valid phone number.

Select jack material*

Cherry Jacks with Holly TonguesBeech Jacks with Beech TonguesNo Preference

Check the box(es) for the jacks you wish to purchase. For individual jacks, be sure to check the box AND enter the number of jacks you want in the quantity box.

1 Set (108) Jacks54 Left Plucking Jacks and 54 Right Plucking Jacks Beech or Cherry depending on availability.

$695.00

1 Set (108) Jacks (Right Plucking)On right plucking registers the dampers will be on the rear of the jacks, making it easier to see the plectra during voicing. On left plucking registers the dampers will be on the front side of the jacks.

$695.00

1 Set (108) Jacks (Left Plucking)On left plucking registers the dampers will be on the rear of the jacks, making it easier to see the plectra during voicing. On right plucking registers the dampers will be on the front side of the jacks.

$695.00

1 Rank (54) Jacks - Right PluckingBeech or Cherry depending on availability

$347.50

1 Rank (54) Jacks - Left PluckingBeech or Cherry depending on availabililty

$347.50

Individual Jack - left pluckingOn left plucking registers the dampers will be on the rear of the jacks, making it easier to see the plectra during voicing.

$6.75 Quantity
Item subtotal:$0.00

Individual Jack - right pluckingOn right plucking registers the dampers will be on the rear of the jacks, making it easier to see the plectra during voicing.

$6.75 Quantity
Item subtotal:$0.00

Subtotal

$0.00

Shipping

$0.00

Total

$0.00

GUARANTEE

Any jacks that fail due to defects in materials or workmanship (plectra excluded) will be immediately replaced at no charge. Hopefully this will not occur, but if it does, just send me an email.

SHIPPING

FOR DOMESTIC ORDERS (including Alaska and Hawaii)

Shipping is included in the price of the jacks.

FOR INTERNATIONAL ORDERS

Shipping costs are totally dependant on your location. These costs cannot be determined on this order form. Please fill out the form and submit it. You will be invoiced for the price of the jacks without shipping costs included When I receive the order I will find the least expensive method of shipping and send you a second invoice that includes the shipping cost only*. You will be able to pay for your order by clicking the blue PAY button on the top of the updated invoice. You do not need a PayPal account.

* Shipping costs for international orders usually range between $50 and $100. lf you would like a more accurate estimate before ordering, send me an email with your name and address (don't forget your country) and I will email you with the shipping cost to your country.

Calculation

Calculator