EV Charger Remote Site Survey

EV Charger Remote Site Survey - For Home Installations

This Site Survey will allow you to confirm which EV Charger you wish to purchase. It will allow us to confirm that the site is suitable for the installation of an EV Charger and the cost of installation. Please note : you will need to be able to upload photos and/or a video to complete this survey. PLEASE NOTE: We currently only service North, North West and North East London and Herts. Please contact us to confirm we are able to service your area!
Any questions on how to complete this form, or questions about our different products? No problem! Send us a Whatsapp to 07375 324 736, email your contact details to info@evchargingexperts.co.uk, or use the contact form on our website (www.evchargingexperts.co.uk) and one of our Experts will call you as soon as possible.
Name*

First NameLast Name
Email*
example@example.com
Phone Number

Area CodePhone Number

Please select which EV Charger you would like to be installed (check our website for details) :*
Would you like the charger to be wall-mounted (Standard) or free-standing (*additional cost) [*free-standing option currently only available for Easee One] ?

Wall-mountedFree-standing (stainless steel pole)
Standard Residential electricity supplies allow for a fast-charger of 7kWh. If your property has a three-phase supply and believe that it could support an 11kWh or 22kWh charger, please indicate below.

StandardThree-phase
Tethered or Untethered? - the Zappi and Simpson are available in both tethered and untethered models. If you have chosen either of these, please select which model you require.

UntetheredTethered (*additional cost)

Please upload a photo of the intended location of the charger ouside [Not needed if you have already sent via Whatsapp]

Please ensure we can see the area immediately surrounding the intended location. You can upload more than one image if needed.
Cancelof
Or Take a Photo!

Please upload a picture of your electricity supply board/fuse box, as well as the meter - please open the box and ensure we can clearly see the switches within [Not needed if you have already sent via Whatsapp]:

You can upload more than one picture if necessary
Cancelof
Or Take a Photo!
Underneath your electricity meter are the main fuses which protect your fuse board. These need to be a certain size to be able to handle a fast (7kWh) charger. Please try to identify the size by looking for a sticker which will read either 40A, 60A, 80A or 100A. If you have three 100A fuses you have a 3-Phase system.

40A60A80A100A3x100ADon't know/cannot locate sticker

Please upload a video showing where you think the cable could be run from supply board until the charger. This could be through the inside of the house or from the outside, depending on the location of the supply box. [Not needed if you have already sent via Whatsapp]

Cancelof

Are there any issues that you think we need to be aware when planning the installation?

EV Charger Remote Site Survey - For Home Installations