Language
English (UK)
Japanese
Boom Cover Order Form MK1
Name
*
First Name
Last Name
Email
example@example.com
Phone Number
*
-
Area Code
Phone Number
Boat Builder
*
Boat Model/Size
*
Is the boat a Catamaran
Yes
No
Measuring Date
*
Detected Location
Cover Type
*
Stack Cover
High Neck Boom Cover
Blanket Cover
STOP: BEFORE YOU START NOTE BELOW
Please do not add extra to measurements! We will add an allowance on our side. If you add to measurements you cover will be too large.
Measurements are preferred in mm, BUT, if you are uncomfortable with that you can measure in cm or meters. BUT, you must be use the same beggining to end and choose the alternative measurement Unit box
Measurement Unit
mm (Preferred)
cm
meters
(A) Mast Circumference (NOTE: This must include halyards, pole tracks and any other hardware.) (mm)
*
Strong Track or Other Track planned to be added?
*
Yes, Strong Track or Other Track planned to be added
No (If no, then no worries!)
(B) Mast to Back of Headboard
*
(B) Height of Sail from Bottom Edge of Boom (Blanket Style)
(C) Top of Headboard to Top of Boom
*
(C) Top of Headboard to Bottom of Boom (Fitted Cover)
(C) Drop Distance of Sail Below Bottom of Boom (Blanket Style)
(D) Complete circumference of sail 50cm behind the mast (Hint measure from top centre to the sail to the boom on one side and multiply by 2)
*
(D) Circumference of Sail from Bottom edge of Boom (0.5m behind mast) (Blanket Style)
(D) Circumference of the sail from bottom edge of boom 0.5m behind the mast (Fitted Cover)
(D1) Circumference of the sail from bottom edge of boom 1m behind the mast (Fitted Cover)
(D2) Circumference of the sail from bottom edge of boom 1.5m behind the mast (Fitted Cover)
(E) Circumference near clew of Sail
*
(E) Circumference of the sail from the bottom edge of the boom near the Clew (Fitted Cover)
(E) Circumference of Sail from Bottom edge of Boom (near clew) (Blanket Style)
(F) Back of Mast to Clew of Sail
*
I Estimated Price of Stack Cover (Yen)
Estimated Price of Fitted Cover (Yen)
Estimated Price of Blanket Cover (Yen)
(G) Clew to end of Boom
*
(H) Length from First Reef to Second (or Third if present) Reef Tie Point on Boom
(H) Circumference of Boom (Blanket Cover & Fitted Cover)
(I) Length from First Reef Tie Point on Boom to Clew
(I) Sail Drop below the Bottom of the Boom near the mast (Fitted Cover)
Please take a photo of the boom and sail from the side
If you want to upload instead please select file here:
Please take a photo of the Mast and Boom
If you want to upload instead please select file here:
Options for you new cover!
Color of Your Cover
Blanco
Silver
Gris
Beige
Azul Real
Azul
Marino
Armada
Admiral
Tweed Azul
Rioja
Botella
(Show all colors with name)
Cover to Boom Attachment Type
Bolt Rope (Recommended)
Lash On (For Carbon Booms with no Groove)
Slides
Webbing Straps (For Carbon Booms with no Groove)
Dacron Fabric Only to Slide in Together with Bolt Rope Foot Sail
Bolt Rope Size
6mm
7mm
8mm
9mm
10mm
12mm
Slide Type
SPNP102 (Round: 8mm)
A007 (Flat: 16mm)
SPNP103 (Round: 10mm)
A008 (Flat: 19mm)
SNPN104 (Round: 12mm)
A009 (Flat: 22mm)
Circumference of Boom (mm)
Number of Reefs on the Sail
0
1
2
3
Number of Lazy Jack Points
2
3
4
5
Our Recommendation for Lazy Jack Points is as follows:
Up to 2.5m Sail Foot: 2 Points
2.5 to 3.5m Sail Foot: 3 Points
3.5 to 4.5m Sail Foot: 4 Points
Over 4.5m Sail Foot: 5 Points
If you know the P Value (Mainsail Luff Length) please enter here. If you do not know then please leave blank and we will check our data for the answer. Please enter in meters.
Notes, Comments, Questions....
Submit
Should be Empty: