Hand-over Sheet

Quality Assurance

Hand Over inspection
Name of Installer

First NameLast Name
Build Name
Name of company (ensure you use the same name for each QA sheet )
Date of QA Check

MonthDayYear
This must be the day the section of the machine was built !
Motion system works as indended

- test by homing the machine

* ensure there are no squeaks or grinding noises and the action is smooth
Take Photo
YESNONotes
Heated beds

Ensure bed heats up

Ensure the PEI sheet is free from bubbles and damage (note there will be marks from the test print )

Ensure the bed is flat (if muli panles are being used)
YESNONotes
Take Photo
Cable Management
- Confirm all cables are neat and tidy and all cable ties have been trimmed - cable must not over lap and must sit parallel to each other .
YESNONotes
Take Photo
Machine is clean free from visual damage.

YESNONotes
Take Photo
Panels
- Panels all have screw
- Panels are sitting square
- Blanking panles installed if no air filter has been installed
Take Photo
Test print worked

YESNONotes
Confirm calibration has been completed (show using the duet interface)

YESNONotes
Take Photo
Machines IP Address
Nozzles installed
General notes/ observations
Handed over by :

Clear
Handed over to :

First NameLast Name
Email
example@example.com
Position
Company
Handed over to :

Clear
Should be Empty:

Quality Assurance