Panel Backlighting (VPX or Single Screen Recommended)
We offer panel backlighting. This is accomplished with an overlay panel that is just under a quarter inch in thickness that is milled and fitted with a circuitboard with LEDs attached, much like what is seen on airliners. Since these circuitboards have to be custom made for each unique setup, we have a few standard setups that help keep cost down as well as guarantee integrity of the panels.
Interior & Exterior Lighting
We can help take the guess work out of your lighting needs. We offer interior and exterior lighting that is tested to work great with our systems with no audio noise.
Wing & Tail Harnesses
If you are starting your build from a flat kit (not quick build). We can supply wing and tail harnesses that you can lay in the plane. These harnesses will have the connectors at the root of the wings and beginning of the tail section to connect to our main harness.
We do not build coax into the harnesses due to the sharp bends that can happen. We do however offer coax kits that will include the coax along with the TNC and BNC connectors needed with one end pre terminated. You will only need to run the coax through the plane and termiante the other end.
Pitot and Static Plumbing Kit
We offer color coded Pitot, Static and AOA tubing and connectors needed to connect properly connect up to your AHRS and G5 to the pitot and static.
We are now offering the Aithre AVi8 & AVi64 Oxygen systems.
These systems are perfect for the high climbing capabilities of the Sling 4, Sling TSi and Sling HW.
These systems can use the Illyrian Pulse OX to deliver the proper amount of oxygen to maintain the proper levels while not wasting oxygen allowing you up to 8 times longer greater duration.
We are now offering the Aithre AVi8 2 Palce Oxygen system.
The Aithre Shield 2.0 and 3.0 are behind the panel CO detectors with on screen alerting and CO level readings.
The Shield 3.0 adds Pilot pulse ox and oxygen bottle pressure monitoring when used with the Illyrian Pulse Ox monitor and the Altus Meso O2 Pressure monitor also allowing for onscreen readings and alerts.
We offer grips from Tosten Manufacturing which are specially molded in our plastic blend to allow us to laser etch the labeling directly onto the grip.