Roof Wind Pressures Input Form

Roof Wind Pressures Form

Components & Cladding Pressures for Roofs
Client Information
Company*
Enter the company's legal name here
Name*

First NameLast Name
Title/Position*
Company Address*

Street Address

Street Address Line 2

CityState

Zip
Phone*
Format: (000) 000-0000.
Email*
example@example.com
Project Information
Project Name*
Project Address*

Street Address

Street Address Line 2

CityState / Province

Postal / Zip Code
Select the Risk Category*
See reference material at the bottom of this form
FlatGableMonoslopeHip
Roof Slope*
Enter slope as X on 12. See slope reference table at the bottom of this form.
Building Length*
Building Width*
Mean Roof Height*
The average of the roof eave height and the height to the highest point on the roof surface, except that, for roof angles less than or equal to 10 degrees, the mean roof height is permitted to be taken as the roof eave height.
YesNo
If the following three questions are left blank, we will assume the building is enclosed under the following conditions:

1. the building is not located in the wind-borne debris region

2. the building is located in the wind-borne debris region and the openings are protected

3. the building is located in the wind-borne debris region and was permitted after the adoption of the 2007 Florida Building Code (built 2009 or later)

We will assume the building is partially enclosed under the following conditions:

1. the building is located in the wind-borne debris region and the date of original construction is not provided or before the adoption of the 2007 Florida Building Code (built 2009 or later), and the protection of the openings is not provided
Date of Original Construction

MonthDayYear
Date
Are the Openings Protected?
You may leave this question blank
What is the Building Enclosure Classification?
You may leave this question blank
Please provide additional comments or special instructions
Attach supplemental drawings, sketches, photographs, and other files here

Cancelof
By submitting this form, I acknowledge that:

M2EC will provide one (1) set of design wind pressures in accordance with ASCE 7-16 and the 2020 Florida Building Code – Building, 7th Edition based on the information entered in this form. M2EC is not responsible for verifying the veracity of the information provided. The design wind pressures are not valid for any conditions except those entered in this form and may not be used for any other project or any other location.

Fee*

Wind Pressures

This fee includes a processing charge.

$625.00

Total

$0.00

Credit Card

Should be Empty:

Roof Wind Pressures Form

Client Information

Project Information

Credit Card