ASPHALT & MATERIAL CALCULATOR!

CHOOSE BELOW:

CALCULATE AGGREGATE TONS NEEDEDCALCULATE ASPHALT TONS NEEDEDCALCULATE SQUARE FOOTAGE COVERAGE PER QUANTITY OF ASPHALT TONS (SPECIFIED BY DEPTH)SHOW LIST OF MATERIALS, DENSITIES & OPTIMAL MOISTURES
ASPHALT TONNAGE CALCULATOR (BASED ON 147.6 MARSHALL)

(ENTER SQUARE FOOTAGE COVERAGE) & (DEPTH). THE TONS WILL THEN BE CALCULATED.
SHOW CALCULATOR (YES/NO)?
CALCULATOR IF NEEDED TO MULTIPLY SQUARE FOOTAGE.
ASPHALT AREA - SQUARE FEET *
ENTER SQUARE FOOTAGE.
DEPTH (STEPPED 1/8" or .125 INCREMENTS)*
SELECT DEPTH IN INCHES.
ASPHALT TONS REQUIRED!
MARSHALL VALUE OF ASPHALT @ 147.6
ASPHALT AREA CALCULATOR BY ASPHALT TONS & DEPTH

(ENTER AMOUNT OF TONS & DEPTH). THE COVERAGE AREA WILL THEN BE CALCULATED.
ENTER QUANTITY OF ASPHALT TONS AND ENTER THE (DEPTH DIMENSION BELOW)
TONS WILL COVER HOW MANY SQUARE FEET PER UNIT OF DEPTH.
ENTER ASPHALT DEPTH DIMENSION (STEPPED 1/8" or .125 INCREMENTS)
SELECT DEPTH IN INCHES.
NUMBER OF SQUARE FEET COVERD BY INPUTED TONS @ SELECTED DEPTH DIMENSION
MATERIAL TABLE WITH DENSITIES AND OPTIMAL MOISTURES

(ENTER LENGTH X WIDTH OR SQUARE FOOTAGE) & (DEPTH).
CHOOSE MATERIAL FROM LAKEVIEW ROCK PRODUCTS MATERIALS LIST*
CALCULATE BY AGGREGATE MATERIAL BY (LENGTH X WIDTH OR SQUARE FEET?)*
ENTER LENGTH DIMENSION (In feet)
ENTER WIDTH DIMENSION (In feet)
ENTER TOTAL SQUARE FOOTAGE (In feet)
AGGREGATE DEPTH (1" STEPPED INCREMENTS)*
SELECT DEPTH IN INCHES.
CALCULATED DEPTH (STEPPED 1" INCREMENTS)
CALCULATED VALUE OF L X W 0R TOTAL SQ FOOTAGE
MATERIAL DENSITY FOR CALCULATION
TYPE OF TRUCK USED FOR DELIVERY
AGGREGATE TONS REQUIRED
CUBIC YARD REQUIRED
TONS PER LOAD PER TRUCK TYPE
NUMBER OF LOADS NEEDED AS PER TRUCK TYPE
NUMBER OF LOADS NEEDED BY TRUCK TYPE ROUNDED UP
3"A-1-A Granular Borrow North Pit
WEIGHT PER CUBIC FOOT
A-1-b North Pit 143.1, 143.1 lbs./3ft, 5.20%
WEIGHT PER CUBIC FOOT
4” Granular Bank Run Upper, 144 lbs./3ft, 5.00%
WEIGHT PER CUBIC FOOT
Random Fill Lower Pit, 138.3 lbs./3ft, 6.00%
WEIGHT PER CUBIC FOOT
Commercial Road Base Upper Pit, 137.5 lbs./3ft, 5.30%
ENTER THE MATERIAL PROCTOR VALUE
Lakeview 1.5" Lakeview Spec, 138.5 lbs./3ft, 5.80%
WEIGHT PER CUBIC FOOT
Bedding Sand Upper Pit, 137.8 lbs./3ft, 6.80%
WEIGHT PER CUBIC FOOT
1.5" Recycled Concrete Roadbase State Pit, 127 lbs./3ft, 8.00%
WEIGHT PER CUBIC FOOT
Type 3 Sand Crushed Fines North Pit 134.6 lbs.3ft, 9.2%
WEIGHT PER CUBIC FOOT
1” Gravel Upper Pit 94.09 lbs./3ft, 0.00%
WEIGHT PER CUBIC FOOT
Screened Topsoil Upper Pit, ( Approximate 81.1) 0.00%
WEIGHT PER CUBIC FOOT
2” Gravel Upper Pit 94.09 lbs./3ft, 0.00%
WEIGHT PER CUBIC FOOT
3" - 8" Cobble Upper Pit
WEIGHT PER CUBIC FOOT
Rip Rap Upper Pit 0.00%
WEIGHT PER CUBIC FOOT
-3/8" Rock Lower Pit 92.4 lbs./3ft, 0.00%
WEIGHT PER CUBIC FOOT
1/2" Minus Sandy Gravel With Silt North Pit 136.4 lbs./3ft 6.30%
WEIGHT PER CUBIC FOOT
SINGLE TRUCK 16.5 TONS
SINGLE TRUCK 6 AXEL 20 TONS
SINGLE TRUCK 13.0 TONS TOPSOIL
STRONG ARM 25 TONS
ENTER THE MATERIAL PROCTOR VALUE.
SIDE DUMP 31 TONS
TRUCK & PUP 30 TONS
ENTER THE MATERIAL PROCTOR VALUE.
SINGLE BELLY 28 TONS
DOUBLE BELLY 40 TONS
THIS FORM IS FOR DEMONSTRATIONAL PURPOSES ONLY. LAKEVIEW ASPHALT PRODUCTS AND LAKEVIEW ROCK PRODUCTS, ASSUMES NO RESPONSIBILITY FOR ITS USE!
12
Number 27
Number 2000
Should be Empty:

ASPHALT TONNAGE CALCULATOR (BASED ON 147.6 MARSHALL)

ASPHALT AREA CALCULATOR BY ASPHALT TONS & DEPTH

MATERIAL TABLE WITH DENSITIES AND OPTIMAL MOISTURES