ONLINE APPLICATION FORM (DOCUMENT SUBMISSION)

Parts IQC Engineering Support Staff (Radiation Protection Officer)

Job Description :

Creating a radiation occupational safety program in the company

Ensuring radiation work equipment is functioning properly

Create and implement procedural operating standards and policies in carrying out radiation protection and safety as a top priority in work

Identifying and also at the same time making improvements to several factors that are closely related to radiation protection and safety.

Conducting leak tests of work equipment radiation

Make an update procedure radiation refer to UU, PP and PERKA BAPETEN

Permit radiation to BAPETEN for all XRF machine

Conduct analysis for Restriction of Hazardous Substance XRF Machine

Requirement : 

D3/D4/S1 Chemical Engineering

Have minimum 2 years working experience in the same position

Strong in data analytic and analysis

Required language(s): English 

 

Parts Warehouse Control Staff

 

Job Description :

Support system development inn parts warehouse division

Support New GX Project implementation

 

Requirements:

D4/S1 Logistic Management/Industrial Engineering or Equivalent

Have 1 year experience with related field would be advantage

Undestand logistic system

Good analytical thinking

Able to work in team or individually

Facility Mechanical Staff

Job Description:

Make scheduling, reporting, presentation & proposal related to Troubleshooting, Periodic/Midterm Maintenance, Shutdown maintenance as build drawing, singIe-line & equipment drawing.

Handle Equipment Maintenance system for industrial such as AC System, Chiller, Compressor, Cooling Tower, etc.

Handle vendor maintenance services such as Daily operational control and trouble shooting.

Requirements:

Candidate must possess at least a Diploma (Mechanical Electrical)

At least 3 year(s) of working experience in the related field is required for this position.

Understand well : as build drawing, singIe-line & equipment drawing.
Active, good analytical thinking, discipline, honest, responsible, able to work in team and work independence

Required language(s): English, Japanese

Preferably Staff (non-management & non-supervisor)s specializing in Engineering - Mechanical/Electrical.

Mold Maintenance Staff

Job Description:

Handle new mold trial and analysis

Mold set up / trial and 4M follow up

Follow up customer claim and countermeasure

Handle 5S and 3T activities

Handle mold repair and maintenance

Requirements:

SMK Mechanical Engineering or relevant

Has knowledge and experience in mold set up and repair

Good analytical thinking

Required language (s): English

Full-Time position(s) available.

Training Management Staff

Job Descriptions:

Develop training based on need analysis

Make other trainers' schedules

Build quarterly and annual training program

Present all the technical and supply training requirements

Prepare budget for training programs and workshops

Encourage employees for training

Track employee success and progress

 

Requirements: 

D3/D4/S1 Any Majors

Have minimum 2 years working experience in the same position

Good communication and teamwork

Familiar in creating training syllabus

Required language(s): English

Purchase Cost Control Staff

Responsibilities:

Handle quotation price from vendor and do verification

Summarize all price in each model and escalation the price issue.

Monitoring and updating cost estimates for projects to ensure that costs are within expected ranges

Conducting cost analyses to identify areas where costs can be reduced or eliminated altogether

Monitoring budgets to ensure that spending does not exceed approved levels

Collecting cost data from suppliers to track material costs

Preparing reports to management regarding costs and expenses

Preparing bid estimates for new projects or bids on existing projects

Managing supplier relationships to ensure that the company is receiving quality products at competitive prices

 

Requirements:

Candidate must possess at least a Bachelor's Degree, Industrial Engineering.

Exceptionally well organized with an aptitude for data

Outstanding communication skills, both written and verbal

Solid networking and interpersonal skills

Able to generate budgets and reports

Strong presentation skills, able to explain concepts concisely and accurately

Able to develop strong, cooperative relationships with department heads

Creative thinking skills and ability to solve problems

Proficiency in using Ms. Excel

Full-Time position(s) available

Fixed Asset Control Staff

Responsibilities:

Handling daily fixed asset transaction

Prepare monthly CIP confirmation and completion to fixed asset to related department

Prepare monthly FA reporting.

 

Requirements:

Candidate must possess at least a bachelor's degree, Accounting.

At least 3 year(s) of working experience in the related field, in manufacturing will be advantage.

Have experience in controlling fixed asset transactions, both physical asset and bookkeeping

Have experience in budgeting for capital investment, including controlling the actual data, both the asset balance and calculation of depreciation.

Have experience in making fixed asset monthly reports accompanied by good analysis for accounting, tax and customs purpose including knowledge of regulations, applicable laws according to concepts of accounting, tax and customs.

Good analytical thinking, detail oriented, discipline, fast response and good team player.

Fluent in English both oral and written.

Applicants must be willing to work in Cikarang,Kabupaten Bekasi.

Full-Time position(s) available.

HR Data Analyst Staff

Responsibilities:

Doing administrative job such as manual input of In/Out attendance data
ID Card Making/Stock Control

FPR maintenance

Support for income tax (PPh 21) activities

Doing data processing in Personnel Management Dept

Requirements:

Candidate must possess at least a bachelor’s degree in Industrial engineering, statistics, mathematics, or equivalent.

At least 1 year of working experience in the related field is required for this position.

Expert to use Microsoft (Ms. Excel, MS. Word, Ms. PowerPoint)

Able to understand and learn new things

High attention to details, good management, and interest with ‘Human Resource’
Expertise in data processing

Have knowledge about taxation is a plus

Fluent in English both oral and written

Full-Time position(s) available.

Cost Control Staff

Job Description : 

 

Handle product cost control and engineering cost down promotion

 

Requirement : 

Diploma or Bachelor's Degree of Industrial Engineering or relevant

Have good knowledge of data management and Ms. Office (Esp. Ms. Excel)

Strong analytical thinking, good planning and organizing tasks

Eager to learn and able to work with team or individual

Able to work under pressure with tight deadline

Product Engineering Staff (Process & Analysis)

Job Description :

Create and revise product engineer document (ACL, PEL, ALO, MOST, MES)

Follow-up of process issues

Do planning and implementation of cost reduction/improvement/efficiency

 

Requirement : 

Diploma or Bachelor's Degree of Mechanical/Mechatronic/Electrical/Industrial Engineering or relevant

Strong analytical thinking, good planning and organizing tasks

Eager to learn and able to work with team or individual

Able to work under pressure with tight deadline

Mold Manufacture Staff

Job Description :

Handle mold & jig manufacture (manual machine process, mold assembly process)

Handle mold repair and improvement

 

Requirement : 

SMK Mechanical/Manufacture Engineering or relevant

Have experience in the related field (mold repair/mold assembly) is required for this position

Active, discipline, honest, responsible, able to work in team and independent

Able to work under pressure with tight deadline

Firmware Design Staff/ Embedded Software Developer

Job Description : 

Design Printer Firmware for several printing function (mechanical movement, copy, scan, GUI, image processing)

Conduct design process, from: Specification study, create design concept, programming (using C or C++), debugging, evaluation in developing firmware

Requirement : 

Diploma or Bachelor's Degree of Electronics Engineering/ Informatics Engineering/ Computer Engineering/ System Control/ Telecommunication/ Physics Instrumentation

Have good knowledge of software development, programming (esp. C/C++ language) and OOP

Have knowledge of Digital Numeric Calculation/Conversion

Strong analytical thinking, good planning and organizing tasks

Eager to learn and able to work with team or individual

Able to work under pressure with tight deadline

PCB Design Staff

Job Description:

Design electrical circuit (Main controller, Power supply, digital circuit) board design for printer

Evaluating and trouble shoot electronic circuit

EMC testing and making the report
Investigate new technology or make innovation in electronic design

Requirement:

D4/S1 Electrical/Electronics Engineering

Understanding Digital Circuit Analysis
Electrical Design and Evaluation Electronic Circuit Analysis and able to use C Language well

Planning & Mechanical Design Staff

 

Job Description:

Making design concept, modelling, drawing, and evaluation
Making document (Technical report, specification, calculation)

 

Requirement:

D4/S1 Mechanical/ Mechatronics Engineering

Able to work in team/individually
Familiar with Technical drawing software (such as:CATIA or Pro-Eng software)

Software Engineer/Fullstack Developer

Job Description

Design and develop scalable, reliable and fault tolerant of line of business web application that powers Epson manufacturing operations.

Write code that you are proud of, with extensibility, scalability and performance in mind.

Write maintainable and clean codes, and able to follow company code standard.

Analyzing requirements and designing new functionality.

Continuously discover, evaluate, and implement new technologies to maximize development efficiency.
Supporting and fixing existing functionality.

Requirement:

D3/S1 programming academic background is preferred (Information Technology, Engineering, Computer Science, Electrical Engineering, Mathematics).

Have good problem solving.

Proficiency with fundamental front-end web programming language such as HTML, CSS, and JavaScript.

Familiar with one or more of server-side popular programming languages such as ASP.NET, C#, NodeJS, Ruby, Python, Go-Lang, Java or PHP.

Experienced in dealing with database.

Familiar with Application Lifecycle Management tools such as Git, VSTS, or TFS.

Enjoy working in team, able to work in deadline.

Able to work with minimal supervision.
Fluent in English and Bahasa Indonesia

Mechanical & Robotic Staff

 

Job Description:

D3-Mechanical Engineering

Have good understanding of mechanical drawing

Have good understanding of wiring pneumatic, repairing and set up machine

 

 

Requirement:

D3/D4/S1 Mechanical/Mechatronics Engineering

Able to make 2D and 3D technical drawing

Familiar with 2D & 3D drawing application such as AutoCAD/Pro Engineering.

Good communication in English and Bahasa Indonesia

Automation Engineering (Electrical)

 

 

Job Description:

Operating and controlling C language Program

Operating and analyzing image/vision software

Operating Robotic and PLC program

 

Requirement:

D3/D4/S1 Electrical/Electronics/Mechatronics Engineering

Good understanding of PLC Programming and Robotic

Good understanding of C Language Programming

Familiar with automation system

Able to communicate in English and Bahasa Indonesia

Software Inspection Staff (Japanese Translator)

 

Job Description:

Do quality confirmation of new printer software/firmware to ensure all functions running as design, and product has performance as specified in quality standard

Analysis any nonconformance items for customer points of view, to be feedback for design improvement

Designing inspection check sheet

Analyze and reporting problem and inspection result

Design printer program-based requirement specification of printer

Develop printer program based on design specification

Make sure the quality of developed program by competences evaluation

Translate design document from Japanese to English

 

Requirement:

 

D4/S1 Japanese Language/Literature or relevant

Have JLPT N-2 would be an advantage.

Has knowledge and interest in software testing (Software Quality Assurance) new technology trend, customer behavior

Has knowledge in networking technology

Strong in analytical thinking

Good systematic of works

Able to work under pressure and tight deadline