• CBCity Logo

    Development Contributions Calculator

    Canterbury-Bankstown Council

  • Plans

     

    This calculator estimates the contributions which may be required for development under the Canterbury Bankstown Local Infrastructure Contributions Plan 2022.

    Please click start to begin.

  • Start

  • Disclaimer
    Council will determine the contribution required for a specific development in accordance with the Canterbury Bankstown Local Infrastructure Contributions Plan 2022, after assessing the characteristics of the development. The following calculator is available for others to use as a guide at their own discretion and Council does not take any responsibility for the assumptions the calculator applies based on the users input.

    The contribution amount should be considered as an indicative estimate only. Contribution rates are indexed on a quarterly basis in accordance with updates to the Consumer Price Index (all groups Sydney index). The Council does not accept any liability for incorrect estimates provided by this calculator. For further information, please contact the planner assessing your application.

  • Development Contributions Calculator

    Development Contributions Calculator

    Canterbury-Bankstown Council

  • 1. Is your development exempt from contributions?

    Most developments will pay contributions. However, a small range of developments which satisfy certain requirements may be exempted from contributions by Council.

    Review clause 1.3 of the Development Contributions Plan to identify if your development is exempt from contributions. A link to exempt development in clause 1.3 of the Plan is here »

    If only part of your development is exempt, you will need to calculate contributions payable for the remaining part which is not exempt.

  • If your development is listed in clause 1.3 as exempt from the plan, development contributions do not apply and you don’t need to continue using the calculator.

    A final decision on whether contributions apply is made when your development application is assessed.

  • Click on the next button to continue »

  • Back

    Next
  • Development Contributions Calculator

    Development Contributions Calculator

    Canterbury-Bankstown Council

  • 2. Where is your development located?

    Click on the maps below to view a larger version and to locate where your development is located.

    BTC CTC CBCity Map
    MAP - Bankstown City Centre

    		 MAP - Campsie Town Centre

    		 MAP - Elsewhere in Canterbury Bankstown

  • Click on the next button below to continue »

  • Back

    Next

  • Back

    Next

  • Back

    Next

  • Back

  • Development Contributions Calculator

    Development Contributions Calculator

    Canterbury-Bankstown Council

  • 3. What type of development are you proposing?

  • Bankstown City Centre calculators

  • Click on this: link to graphic examples of development types if you need further help understanding which category applies to your application.

  • s7.11 contribution rates for Bankstown City Centre apply to this development.

    Click Next to continue.

    Back

    Next

  • s7.12 contribution rates for Bankstown City Centre apply to this development.

    Click Next to continue.

    Back

    Next

  • For this type of development, the calculator needs you to:

    1. Enter details of the additional dwelling(s), then print or note that estimate,
    2. Then Click "Next",
    3. Enter the cost of replacement dwelling,then print or note that estimate,
    4. Compare the two estimates – Whichever is the higher of these 2 contributions estimates will apply to your development.

    Click NEXT to continue.

    Back

    Next

    NOTE: For this type of combined development, the contributions plan can only charge whichever is the HIGHER contribution payable for either:

    • the additional dwelling(s) (applying s7.11 contributions) OR
    • the cost of the replacement dwelling (applying a s7.12 contribution).

  • For this type of development, the calculator needs you to:

    1. Enter details of the additional dwelling(s), then print or note that estimate,
    2. Then Click "Next",
    3. Enter the cost of alterations to the existing dwelling,then print or note that estimate,
    4. Compare the two estimates – Whichever is the higher of these 2 contributions estimates will apply to your development.

    Click Next to continue.

    Back

    Next

    NOTE: For this type of combined development, the contributions plan can only charge whichever is the HIGHER contribution payable for either:

    • the additional dwelling(s) (applying s7.11 contributions) OR
    • the cost of alterations to the existing dwelling (applying a s7.12 contribution).

  • For mixed use development, the calculator needs you to:

    1. Enter details of the residential part of the development, then print or note that estimate,
    2. When that's complete press Next to calculate contributions for the non-residential part of your development,
    3. Enter details of the non-residential part,then print or note that estimate,
    4. Compare the two estimates – the higher contributions estimate will apply.

    Click Next to continue.

    Back

    Next

    NOTE: For this type of combined development, the contributions plan can only charge whichever is the HIGHER contribution payable for either:

    • the additional dwelling(s) (applying s7.11 contributions) OR
    • the cost of alterations to the existing dwelling (applying a s7.12 contribution).

  • Back

    		  
  • Development Contributions Calculator

    Development Contributions Calculator

    Canterbury-Bankstown Council

  • 3. What type of development are you proposing?

  • Campsie Town Centre calculators

  • Click on this: link to graphic examples of development types if you need further help understanding which category applies to your application.

  • s7.11 contribution rates for Campsie Town Centre apply to this development.

    Click Next to continue.

    Back

    Next

  • s7.12 contribution rates for Campsie Town Centre apply to this development.

    Click Next to continue.

    Back

    Next

  • For this type of development, the calculator needs you to:

    1. Enter details of the additional dwelling(s), then print or note that estimate,
    2. Then Click "Next",
    3. Enter the cost of replacement dwelling,then print or note that estimate,
    4. Compare the two estimates – Whichever is the higher of these 2 contributions estimates will apply to your development.

    Click NEXT to continue.

    Back

    Next

    NOTE: For this type of combined development, the contributions plan can only charge whichever is the HIGHER contribution payable for either:

    • the additional dwelling(s) (applying s7.11 contributions) OR
    • the cost of the replacement dwelling (applying a s7.12 contribution).

  • For this type of development, the calculator needs you to:

    1. Enter details of the additional dwelling(s), then print or note that estimate,
    2. Then Click "Next",
    3. Enter the cost of alterations to the existing dwelling,then print or note that estimate,
    4. Compare the two estimates – Whichever is the higher of these 2 contributions estimates will apply to your development.

    Click Next to continue.

    Back

    Next

    NOTE: For this type of combined development, the contributions plan can only charge whichever is the HIGHER contribution payable for either:

    • the additional dwelling(s) (applying s7.11 contributions) OR
    • the cost of alterations to the existing dwelling (applying a s7.12 contribution).

  • For mixed use development, the calculator needs you to:

    1. Enter details of the residential part of the development, then print or note that estimate,
    2. When that's complete press Next to calculate contributions for the non-residential part of your development,
    3. Enter details of the non-residential part,then print or note that estimate,
    4. Compare the two estimates – the higher contributions estimate will apply.

    Click Next to continue.

    Back

    Next

    NOTE: For this type of combined development, the contributions plan can only charge whichever is the HIGHER contribution payable for either:

    • the additional dwelling(s) (applying s7.11 contributions) OR
    • the cost of alterations to the existing dwelling (applying a s7.12 contribution).

  • Back

    		  
  • Development Contributions Calculator

    Development Contributions Calculator

    Canterbury-Bankstown Council

  • 3. What type of development are you proposing?

  • Elsewhere in Canterbury Bankstown calculators

  • Click on this: link to graphic examples of development types if you need further help understanding which category applies to your application.

  • s7.11 contribution rates for elsewhere in Canterbury Bankstown apply to this development.

    Click Next to continue.

    Back

    Next

  • s7.12 contribution rates for elsewhere in Canterbury Bankstown apply to this development.

    Click Next to continue.

    Back

    Next

  • For this type of development, the calculator needs you to:

    1. Enter details of the additional dwelling(s), then print or note that estimate,
    2. Then Click "Next",
    3. Enter the cost of replacement dwelling,then print or note that estimate,
    4. Compare the two estimates – Whichever is the higher of these 2 contributions estimates will apply to your development.

    Click NEXT to continue.

    Back

    Next

    NOTE: For this type of combined development, the contributions plan can only charge whichever is the HIGHER contribution payable for either:

    • the additional dwelling(s) (applying s7.11 contributions) OR
    • the cost of the replacement dwelling (applying a s7.12 contribution).

  • For this type of development, the calculator needs you to:

    1. Enter details of the additional dwelling(s), then print or note that estimate,
    2. Then Click "Next",
    3. Enter the cost of alterations to the existing dwelling,then print or note that estimate,
    4. Compare the two estimates – Whichever is the higher of these 2 contributions estimates will apply to your development.

    Click Next to continue.

    Back

    Next

    NOTE: For this type of combined development, the contributions plan can only charge whichever is the HIGHER contribution payable for either:

    • the additional dwelling(s) (applying s7.11 contributions) OR
    • the cost of alterations to the existing dwelling (applying a s7.12 contribution).

  • For mixed use development, the calculator needs you to:

    1. Enter details of the residential part of the development, then print or note that estimate,
    2. When that's complete press Next to calculate contributions for the non-residential part of your development,
    3. Enter details of the non-residential part,then print or note that estimate,
    4. Compare the two estimates – the higher contributions estimate will apply.

    Click Next to continue.

    Back

    Next

    NOTE: For this type of combined development, the contributions plan can only charge whichever is the HIGHER contribution payable for either:

    • the additional dwelling(s) (applying s7.11 contributions) OR
    • the cost of alterations to the existing dwelling (applying a s7.12 contribution).

  • Back

    		  
  • Development Contributions Calculator

    Development Contributions Calculator

    Canterbury-Bankstown Council

  • 2. Where is your development located?

    Map - Bankstown City Centre

    BCC Map

    To zoom in on the map press the Ctrl key and use the scroll on your mouse.

  • Development Contributions Calculator

    Development Contributions Calculator

    Canterbury-Bankstown Council

  • 2. Where is your development located?

    Map - Campsie Town Centre

    CTC Map

    To zoom in on the map press the Ctrl key and use the scroll on your mouse.

  • Development Contributions Calculator

    Development Contributions Calculator

    Canterbury-Bankstown Council

  • 2. Where is your development located?

    Map - Elsewhere in Canterbury Bankstown

    Elsewhere in CBCity map

    To zoom in on the map press the Ctrl key and use the scroll on your mouse.

  • Should be Empty: