CPC30220 - Certificate III in Carpentry: RPL Application

1
Have you worked in the industry in the last five (5) years?
YESNO
2
How many years or relevant experience do you have?
1 - 2 Years
3 - 5 Years
5 Years +
3
Can you provide evidence of this experience?This will be in the form of images, video, supervisor reports and previous certificates.
YESNO
4
Are you an Australian Citizen / Permanent Resident
YESNO
5
Name* This field is required.
First Name
Last Name
6
Phone Number* This field is required.
Please enter a valid phone number.
7
Email* This field is required.
example@example.com
8
State* This field is required.Select your state from the dropdown list below.
ACT
NSW
NT
QLD
SA
TAS
VIC
WA
9
In this section please select if you have had any experience in a unit of competency by reading the description. We have listed the units of competency for CPC30220 Certificate III in Carpentry. If you mention you have had experience also tick if you are able to provide evidence of this. An example is shown below.
10
CPCCCA2002 Use carpentry tools and equipmentThis unit of competency supports achievement of skills in identification, correct and safe use and maintenance of hand and power tools commonly used in the construction industry. Please select the boxes below corresponding to your Experience and the Evidence you can supply
11
CPCCCA2011 Handle carpentry materialsThis unit of competency supports achievement of skills to identify commonly used carpentry materials and handle, store and move them safely and efficiently without damage, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
12
CPCCCA3001 Carry out general demolition of minor building structuresThis unit of competency supports achievement of skills to safely demolish existing construction work and safely dispose of the waste materials, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
13
CPCCCA3002 Carry out setting outThis unit of competency supports achievement of skills to set out for a range of construction activities, including the positioning of a building and associated structures on a site, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
14
CPCCCA3003 Install flooring systemsThis unit of competency supports achievement of skills to determine the materials and process and then install a variety of flooring systems, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
15
CPCCCA3004 Construct wall framesThis unit of competency supports achievement of skills to construct from raw materials a range of wall frames commonly used in the construction industry, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
16
CPCCCA3005 Construct ceiling framesThis unit of competency supports achievement of skills to determine materials and process, and then construct a range of ceiling frames used in the construction industry, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
17
CPCCCA3006 Erect roof trussesThis unit of competency supports achievement of skills to safely and efficiently erect pre-built roof trusses for gable, hip and valley, hip and flat roof construction projects, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
18
CPCCCA3007 Construct pitched roofsThis unit of competency supports achievement of skills constructing eaves for roof finishing in a range of construction projects, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
19
CPCCCA3008 Construct eavesThis unit of competency supports achievement of skills to construct scotch valley, broken hip and valley gable, hip and valley, hip and flat roofs in a range of construction projects, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
20
CPCCCA3010 Install windows and doorsThis unit of competency supports achievement of skills to install windows and doors in new or existing buildings for a range of construction projects, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
21
CPCCCA3016 Construct, assemble and install timber external stairsThis unit of competency supports achievement of skills for constructing stairs to external access to a building or construction structure, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
22
CPCCCA3017 Install exterior claddingThis unit of competency supports achievement of skills of applying material finishes to weatherproof a building in a range of construction projects, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
23
CPCCCA3024 Install lining, panelling and mouldingThis unit of competency supports achievement of skills for lining, panelling and installing mouldings to walls in a range of construction projects, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
24
CPCCCA3025 Read and interpret plans, specifications and drawings for carpentry workThis unit of competency supports achievement of basic reading and interpretation of plans and specifications commonly used in the construction industry. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
25
CPCCCA3028 Erect and dismantle formwork for footings and slabs on groundThis unit of competency supports achievement of skills for constructing simple formwork, which includes working with others and as a member of a team. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
26
CPCCCM2006 Apply basic levelling proceduresThis unit of competency specifies the outcomes required to carry out levelling in a single plane for the purpose of establishing correct and accurate set-out of building components. It includes the set-up, testing and use of levelling devices, and establishing and transferring heights using a range of levelling equipment. The unit supports workers in the construction industry who use a variety of common methods and equipment when working with others and as a member of a team. It applies to levelling work on residential and commercial work sites. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
27
CPCCCM2008 Erect and dismantle restricted height scaffoldingThis unit specifies the skills and knowledge required to erect and dismantle restricted height scaffolding to provide work platforms for various occupational applications. This unit is restricted to modular scaffolding to a height of 4 metres and includes: - Placement of safety barriers - The application of knowledge to handle, erect and dismantle a range of restricted height scaffolding systems. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
28
CPCCCM2012 Work safely at heightsThis unit specifies the skills and knowledge required to work safely on construction sites where the worker has the potential to fall from one level to another. This unit of competency does not cover the erection of scaffold or work platforms, but it does include identifying and reporting common faults with scaffold or work platform systems. Work at heights is undertaken in a range of construction work, including new construction, renovation, refurbishment and maintenance. This unit also applies to workers in other industries who need to control the two separate risks associated with people and objects falling from heights. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
29
CPCCCO2013 Carry out concreting to simple formsThis unit of competency specifies the skills and knowledge required to safely install formwork, reinforcement and place and finish concrete for the construction of minor slabs, pathways and other minor works to a specified design finish, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
30
CPCCOM1012 Work effectively and sustainably in the construction industryThis unit of competency specifies the skills and knowledge required to work effectively and sustainably in the construction industry. The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
31
CPCCOM1014 Conduct workplace communicationThis unit of competency specifies the skills and knowledge required to communicate effectively with other workers in a construction workplace environment. The unit includes gathering, conveying and receiving information through verbal and written forms of communication. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
32
CPCCOM1015 Carry out measurements and calculationsThis unit of competency specifies the skills and knowledge required to undertake basic measurements and calculations to determine task and material requirements in a construction work environment. A person working at this level would be expected to complete tasks assigned to them, under supervision. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
33
CPCCOM3001 Perform construction calculations to determine carpentry material requirementsThis unit of competency specifies the skills and knowledge required to plan and perform calculations to determine material requirements for a construction project. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
34
CPCCOM3006 Carry out levelling operationsThis unit of competency specifies the skills and knowledge required to carry out levelling operations to establish correct and accurate set-out of buildings and components, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. It includes: Using the rise and fall and height of collimation methods Setting up, testing and using levelling devices Undertaking closed and open traverses using a range of levelling equipment Calculating distances using stadia lines. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
35
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industryThis unit specifies the outcomes required to carry out work health and safety (WHS) requirements through safe work practices in all on- or off-site construction workplaces. It requires the performance of work in a safe manner through awareness of risks and work requirements, and the planning and performance of safe work practices with concern for personal safety and the safety of others. The unit covers fundamental WHS requirements necessary to undertake work tasks within any sector in the construction industry. It includes the identification of hazardous materials, including asbestos, and compliance with legislated work safety practices. It does not cover removal of asbestos, which is a licensed activity. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
36
CPCWHS3001 Identify construction work hazards and select risk control strategiesThis unit of competency specifies the skills and knowledge required to participate in preparing a job safety analysis (JSA) for general hazards, and a safe work method statement (SWMS) for high risk work hazards on construction sites as specified in work health and safety (WHS) legislation. It includes meeting all relevant requirements of the National Construction Code (NCC), Australian Standards and Commonwealth and state or territory legislation. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
37
CPCCCA3012 Frame and fit wet area fixturesThis unit of competency specifies the skills and knowledge required to install supporting framework for fixtures and flashings for wet area construction of a bath, shower base, and prepare for wet area linings, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. The unit includes setting out, cutting and fabrication of frames and installation of frames in bathroom, laundry, shower, toilet and ensuite wet areas. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
38
CPCCCA3014 Construct and install bulkheadsThis unit of competency specifies the skills and knowledge required to construct bulkheads for decorative purposes, to contain fittings, such as range hoods and cupboards, to conceal services, and to help facilitate changes in ceiling heights, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. The unit includes preparing for sheeting bulkheads with plasterboard, lining boards, reconstituted timber products and metal or plastic decorative panels; and installation of bulkheads which may be hung from, incorporated into, or fastened onto a structure in situ. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
39
CPCCCA3018 Construct, erect and dismantle formwork for stairs and rampsThis unit of competency specifies the skills and knowledge required to construct, erect and dismantle formwork for stairs and ramps to provide access between floors and landings, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. It includes: Establishing required levels on site Constructing timber, metal or prefabricated formwork to contain wet poured concrete until it is completely cured Stripping the formwork Preparing and storing formwork for re-use. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
40
CPCCCM2002 Carry out hand excavationThe unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
41
CPCCSF2004 Place and fix reinforcement materialsThis unit of competency specifies the skills and knowledge required to place and fix reinforcement for concrete work as part of construction processes. It includes: Planning and preparing for the work Final preparation for placement Placing and fixing reinforcement Checking the reinforcement Completing clean-up activities. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
42
CPCCBC4014 Prepare simple building sketches and drawingsThis unit of competency specifies the skills and knowledge required to prepare sketches and drawings used for communicating ideas to clients and other parties. It includes capturing design concepts and options taken from architectural drawings to create simpler versions. The unit of competency applies to builders, experienced tradespersons, project managers and estimators who prepare sketches and drawings for estimating, explaining details and showing measurements required for building and construction work. It does not describe more complex drafting skills. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
43
CPCCBC4004 Identify and produce estimated costs for building and construction projectsThis unit of competency specifies the skills and knowledge required to establish estimated costs associated with the acquisition of materials and labour for building and construction projects. It includes factoring in relevant overhead costs and margins. This unit of competency applies to estimators, builders, managers and trade contractors within the construction industry responsible for producing estimated costs on various residential and commercial construction projects within their scope of work as a trade contractor or builder. Please select the boxes below corresponding to your Experience and the Evidence you can supply.
Should be Empty: