Hot Work Permit

Hot Work Permit

ASE Safety Management System
***Notice***

Permits- Although this permit is not required for contractor Hot Work activities on a Arrow S Energy Operating (the Company) location, it is made available as an example to contractors who provide services to Arrow S Energy Operating. The Company requires contractors to utilize their company-provided permitting system when conducting Hot Work on a Company location.
Date

MonthDayYear
Date
Job Supervisor

First NameLast Name
Supervisor Email
example@example.com
DrillingAdmin ServicesConstructionCompletionsSource WaterProductionMaintenanceWellservice/Workover
Location where hot work will occur
Fire watch(s)
Description of work to be performed
Controls

Are hazards controlled
Atmosphere must be constantly monitored using personal monitor and documented every half hour. (click save to open additional entry)

Rows	Yes	No
Are water hoses or fire extinguishers available and in good repair?
Is hot work equipment in good repair?
Have flammable liquids, dust, lint and oily deposits within 35 ft. been removed?
Have explosive atmosphere been eliminated?
Has the work surface area been cleaned of grease, paint, etc.?
Have combustible floors been wet down, covered with damp sand or covered with fire resistant sheets?
Have surface areas below work area been protected?
Have access ways below work area been barricaded?
Are UV shields in place?
Has enclosed equipment been cleansed of all combustibles?
Have all containers been purged of flammable liquids and vapors?
Will fire watch be provided during and for 60 minutes after work, including coffee and/or lunch breaks?
Has fire watch been provided with suitable fire extinguishing devices?
Has the fire watch person been trained in use of fire extinguishing devices and in sounding alarm(s) or other emergency communications?
Has additional fire watch been assigned to adjoining areas, above and below?
Hot work area will be monitored for 30 minutes after completion of work?

Controls