Driver Road Test Checklist
  • Driver Road Test Checklist

  • Date of Road Test*
     - -
  • Check one of the following:*
  • PRE-TRIP INSPECTION

  • Checks general condition of vehicle*
  • Checks for proper operation of parking and service brake systems*
  • Checks steering mechanism*
  • Checks condition of tires*
  • Checks all lighting devices and reflectors*
  • Checks horn and windshield wipers*
  • Checks and adjusts rearview mirrors*
  • Checks emergency equipment*
  • COUPLING AND UNCOUPLING COMBINATION UNIT

  • Checks that fifth wheel jaws are open*
  • Lines up properly with the trailer*
  • Connects brake and electrical lines*
  • Charges trailer brakes*
  • Backs up slowly*
  • Visually checks for proper coupling of fifth wheel*
  • Assures that fifth wheel handle is in locked position*
  • Raises landing gear and removes wheel chocks*
  • Applies trailer brakes and gently tries to pull away from trailer*
  • PLACING VEHICLE IN OPERATION

  • Uses seat belt*
  • Starts vehicle properly*
  • Checks air pressure in brake system*
  • Tests operation of brakes*
  • Checks traffic conditions*
  • DRIVING

  • Drives with both hands on the steering wheel*
  • Checks mirrors frequently, especially when backing*
  • Accelerates, steers, and brakes smoothly*
  • Shifts gears properly*
  • Uses directional signals properly*
  • Maintains proper speed for conditions, within speed limit*
  • Able to slow vehicle other than by braking*
  • Stops vehicle in proper location*
  • Does not allow vehicle to roll, while it should be stopped*
  • Checks in all directions for traffic conditions*
  • Prepares to stop vehicle at an intersection, even if traffic signal is green*
  • Signals intention to turn well in advance*
  • Approaches a turn at the proper speed*
  • Makes sure vehicle is in proper lane for turn*
  • Checks traffic conditions and turns only when intersection is clear*
  • Keeps vehicle in proper lane during turn*
  • Does not shift gears during turn*
  • Stops in correct position when parking*
  • Gets out of vehicle and checks entire area, including overhead, before backing*
  • Avoids backing from blindside*
  • Only passes in safe location, where legally allowed, and within legal speed limit*
  • Checks ahead and behind to make sure passing room is adequate*
  • Warns vehicle ahead of intention to pass*
  • Uses directional signals properly when passing*
  • Leaves sufficient space before cutting back into lane*
  • Checks in all directions when approaching railroad crossing*
  • Comes to complete stop at railroad crossing, when necessary, or as required bylaw*
  • Stops at a safe distance of the railroad crossing, when necessary*
  • Does not shift gears when crossing railroad tracks*
  • Should be Empty: