Tin Cutter: The aviation snips, also called tin snips or compound snips, even though they are separate, are the best hand tools for cutting metal sheets.
The aviation snips, also called tin snips or compound snips, even though they are separate, are the best hand tools for cutting metal sheets.
It is easy to cut in a straight line with tin snips. It’s making curved cuts that can be tricky, especially if you’re holding the wrong tool.
Read: antifreeze stop leak
Tin snips, also known as tin snips, tinner snips, and shears, are hand tools specifically designed for cutting sheet metal.
Tin snips look similar to ordinary scissors; however, they are much sturdier and allow control for precise cutting.
Different Types:
There are varieties of different types of tin snips that are usually distinguished by the shape and direction of the blade. The three commons types are straight-cut tin snips, offsets tin snips, and vertical tin snips.
Read: chevy silverado vortec max
#1. Straight-Cut Tin Snips
The Straight-cut tin snips have straight blades that are slightly shorter than the length of the scissor blade. However, the blades are much thicker & heavier than scissor blades to enables them to cut through sheet metal. These tin snips usually have yellow handles, so you can quickly separate them with an offset snip.
Offsets tin snips fall into two categories:
a. Clockwise-cut tin snips:-
As the name indicates, clockwise cut tin snips are used to cut in clockwise directions. They have a green handle to sets them apart from counterclockwise-cut snips.
Read: motor vehicle services warranty
b. Counterclockwise-Cut Tin Snips:-
Counterclockwise-cut tin snips can be recognized by their red handles. This tin snip is bests paired with clockwise-cut snips so you can effectively make curved cuts in both directions.
#2. Vertical tin snips
The Vertical tin snips have a set of blades that sit at right angles to the handle of the tool, which is why they are also knowns as right-angles tin snips. This tool is ideal for tight spaces where only Snip’s blades can fit.
Read: cam types