EV Wall Charger Information

Tesla Wall Connector Installation
Thanks for your inquiry about installing a Tesla Wall Connector.

Tesla Wall Connector installations start at $699 incl. for Single Phase and $999 incl. for 3 Phase provided the Wall Connector is installed within 2m of the electrical switchboard or electrical metering enclosure.

We require all customers to answer the below questions to help us provide a quote that's as accurate as possible without having to attend your property. If further details are still needed a site inspection will need to be arranged. For site inspections there is a fee of $185 incl. GST. If you are in an apartment building or complex, a site inspection is always required.

PLEASE NOTE:

We are currently only providing free online quotes for 3-phase and 20A (4.8kW) connections.

If you would like a connection of more than 20A, we will need to attend your property in order to prepare an accurate quotation - for this there is a $185+gst site attendance & consultation fee.

Before answering the below questions, please read our website in regards to the types of charging available for EV's:

https://cmelec.com.au/ev-charger-installation-brisbane/

Please also use this calculator to familiarise yourself with charger outputs & charging times for your particular model. If you drive less than 100km a day on average, you'll see that you will need a lower power supply to your charger than you think:

https://evadept.com/calc/tesla-charge-time-calculator

(In Australia, we use 240V & most homes will have a 1 Phase connection. Ignore the outlet types and click 'Set own specs' )
Name*

First NameLast Name
Address*

Street Address

SuburbState

Post Code
Mobile Phone Number*
Please enter a valid phone number.Format: 0000 000 000.
Email*
example@example.com
How did you hear about us?*
SECTION 1
1. Have you checked with your Home & Contents Insurer to see if your policy will be void if there's a fire caused by your EV? This is important and will determine where your charger can be installed on the property*
Please Note: CM Electrical Qld advises that charger locations are compliant with insurance policies, and will not be held responsible for any damages caused by fires originating from your EV.
2. Have you received your Tesla Wall Connector?*
Please note that we do not supply Tesla Wall Connectors, and can only book the installation if the delivery date of your Wall Connector has been confirmed
3. What distance would you like the Wall Connector installed from the electrical switchboard / meter board? You can roughly measure by taking large steps between the switchboard and the charger location: 1 step = 1 metre*
Please note, if the distance is more than 10m, and/or can’t be captured in the one photo, a site inspection may be required
4. Is your property Single Phase or 3 Phase?*
Queensland's power authorities have strict requirements for EV Charger connections; chargers can be connected to a 24/7 supply of 20A (Approx. 4.8kW), however if you would like your charger to supply more than 4.8kW, your charger must be connected to a controlled tariff via your meter which will disconnect your charger at peak times.

If you have 3-phase power at your home, these requirements don't apply to your home.

IMPORTANT: If you want to have a 32A connection, you must have a meter with the appropriate tariff. We cannot check this for you, and we can't tell from photos - customers must check this with their power retailer if they have the appropriate meter.

If you proceed with this option, we are assuming you've checked that you have the correct meter, and/or had the correct meter installed.

Please familiarise yourself with the Energex requirements, and potential fines & reciification fees if you have an EV Charger installed at more than 20A without the correct meter connection: https://www.energex.com.au/manage-your-energy/smarter-energy/electric-vehicles-ev/charging-your-ev
5. What connection would you like your EV charger*
SECTION 2

Please read the description for each photo carefully - if we don't receive the correct photos, we won't be able to provide an online quote.
Wide-angle photos of the area where your wall charger will be installed*

Photos today are hi-resolution, so stand back 4-5 metres (we can zoom in). We need to be able to see the ground and the ceiling. Please mark the desired location on the photo with an X
Cancelof
Upload photos of your electrical switchboard (fuse board)

This is where the circuit breakers (sometimes incorrectly called 'fuses') for your home are. 2 photos needed - a wide angle showing the board and surrounding area (we must be able to see the floor and ceiling), and a close-up photo with the door open.
Electrical Switchboard Images*

Ensure the numbers printed on the circuit breakers are visible in the close-up photo.
Cancelof
Upload photos of your outside meter enclosure

Upload 2 photos here - 1 wide angle showing the board and surrounding area (stand back 4-5 metres), and 1 photo with the enclosure door open
Meter Enclosure Images*

Cancelof
If there's any other information you'd like to add that might help, please do so here:
Any Information such as where the switchboard is in relation to the garage, whether your carport is detached from the house, etc.
Please note: We are currently inundated with charger installation requests and may take up to 3 days to review your request and provide a quotation. Your patience & understanding is appreciated.

Thank you for your time. We look forward to getting your EV powered!

Please click 'Submit' below to complete this form
Should be Empty:

Tesla Wall Connector Installation

SECTION 1

SECTION 2

Upload photos of your electrical switchboard (fuse board)

Upload photos of your outside meter enclosure