You can always press Enter⏎ to continue
FAI Badge Declaration

FAI Badge Declaration

This step is NOT Required if you have made a declaration by putting a task in your Flight Recorder!  This form MUST be completed before take-off in order to be valid.
11Questions
  • 1

    This form is used to make an external declaration for a Badge Flight.  The Declaration made here will supercede any declaration made in a Flight Recorder (FR) or Position Recorder(PR) ONLY if the declaration on this form is made after the declaration in the Flight Recorder.

    Please note the following  points carefully:

    A declaration should be placed into the FR/PR if possible.  If this is done, there is no need to use this form.

    • This form only overrrides a Flight Recorder declaration if it is made AFTER the task has been entered into the FR.
    • Declarations (either in the FR/PR or on this form)  are required for distance flights except in special circumstances.  Declarations are always required if waypoints are to be claimed.
    • Free waypoints (those selected after the flight) are NOT allowed.
    • Enter the Latitude and Longitude of all points using Degrees, Minutes and Decimals (NOT seconds).  Entering names only can lead to confusion about what exact point is meant.
    • Make sure that the device you are using is eligible to record the flight you are attempting.  Full details can be found at the IGC Website (Click the link).
    • No IGC approved Flarm is eligible to claim anything beyond a Diamond Badge flight.
    • A non-approved Flarm (such as OzFlarm) or Position Recorder can be used only to claim a Silver or Gold Badge.


    If used, this form must be completed before takeoff in order to be valid.

    Press
    Enter
  • 2
    Press
    Enter
  • 3
    Press
    Enter
  • 4
    A confirmation email will be sent to this address on completion
    Press
    Enter
  • 5
    Enter the registration and aircraft type
    Press
    Enter
  • 6
    Press
    Enter
  • 7
    Press
    Enter
  • 8
    Press
    Enter
  • 9

    Flight Details - task declaration
    Please include turn point names and lat / long details.




    Take off airfield    *    
    Start Point    *    
    Point 1        
    Point 2      
    Point 3        
    Finish Point    *      

    Press
    Enter
  • 10
    Please provide any additional information relating to your declaration
    • Huge
    • Large
    • Normal
    • Small
    Ok
    quoteCreated with Sketch.
    Ok
    Press
    Enter
  • 11
    Press
    Enter
  • Should be Empty:
Question Label
1 of 11See AllGo Back
close