GP1 Order Form

Kommander GP1 Order Form

Start Building your Custom Kommander GP1 HERE!
Below are base costs for the 4 OPTIONS that we provide: ALL Kommander GP1 Hulls come with Infused Fiberglass Bottom Hull, Infused Fiberglass Top Deck, Infused Fiberglass Hood, Front Nose Spray Deflector /Handling Enhancer with Hood "Wings", Billet Hood Hooks, Stainless Hood Brackets, Hood Seal, Custom aluminum Pump Plate, Custom Aluminum Pump Shoe, Aluminum Intake Grate, Ride Plate, Rear Hull Extensions, Rear Sponsons, Billet Drive Coupler, Front and Rear Tie-down Hooks, and Bumper Kit.
What type of build are we building for you?*

GP1 1500 - CUSTOMER PROVIDES KAWASAKI DONOR SKI - YOU provide Kommander Industries with a 2017-Present Kawasaki SXR15F jetski and we remove the parts and install them in our GP1 Hull - Includes everything listed in above PLUS: Installation of YOUR stock Motor, Custom Aluminum Waterbox, Billet Fuel Cap, Handlepole Bracket, Exhaust Hoses, T-Bolt Clamps, Basic Graphic Kit, Coil Bracket, RRP Cast Handlepole (or similar), Chin Pad, Steering Stop, Steering System, Handlebars, Grips, Air Filter, Handlepole Hood Pad, By Pass Fittings, Versi-plugs, Handlepole Spring, Spring Block tensioner, Crankcase Filter, Hardware, Rivets, and Mat Kit. [$20,995.00]GP1 1500 - KOMMANDER PROVIDES KAWASAKI DONOR SKI - Kommander Industries will build a complete ski using a brand new Kawasaki SXR15F donor ski that we provide. Includes ALL the items listed above. [$32,995.00]GP1 1050 - CUSTOMER PROVIDES YAMAHA DONOR SKI - YOU provide Kommander Industries with a 2021-Present Yamaha Superjet and we remove the parts and install them in our GP1 Hull - Includes everything listed in above PLUS: Installation of YOUR stock Motor, Custom Aluminum Waterbox, Billet Fuel Cap, Handlepole Bracket, Exhaust Hoses, T-Bolt Clamps, Basic Graphic Kit, Coil Bracket, RRP Cast Handlepole (or similar), Chin Pad, Steering Stop, Steering System, Handlebars, Grips, Air Filter, Handlepole Hood Pad, By Pass Fittings, Versi-plugs, Handlepole Spring, Spring Block tensioner, Crankcase Filter, Hardware, Rivets, and Mat Kit. [$22,495.00]GP1 1050 - KOMMANDER PROVIDES YAMAHA DONOR SKI - Kommander Industries will build a complete ski using a brand new Yamaha Superjet donor ski that we provide. Includes ALL the items listed above. [$31,395.00]
Kommander GP1 Components Color Chooser:

Please click on the part of the Kommander GP1 Color Model you want to change colors. (Nose Piece and Wings, Hood, Top Deck, or Bottom Hull) We offer 12 Standard colors to choose from - all available in Metal Flake for an additional charge.
[COLORMODEL]
Nose/Wings, Hoods and Tops Decks can be Metal Flake finish. Do you want Metal Flake on those parts? [add $250.00]*
Kommander GP1 Graphics Color Chooser:
[GRAPHICS MODEL]
[COLORSELECT]
Please click on the Color Choosers above to change the colors of our standard 2023 Graphics Package. When you submit the form we will be given the CMYK Color Values of your color choices and we will print the Graphics Kit to your specifications.

ABOUT OUR EXCLUSIVE KOMMANDER GRAPHICS COLOR MODEL SOFTWARE: NOT ALL COMPUTER MONITOR SCREENS OR PHONES OR TABLET HAVE THE SAME SCREEN CALIBRATON - ESPECIALLY WHEN IT COMES TO COLOR DISPLAY. We are only able to match your colors to the Color Codes you choose via the Color Pickers below. IF YOU HAVE THE ACTUAL CMYK or PANTONE Color values, you can simply type in those values for each of your 3 color choices in the "Additional Notes" field at the bottom of this form before you submit.
What Race Number would you like on your number plates?
Leave BLANK if you do not want us to print a number on the number plates.
MATS

Please choose your MAT Components from the options below
Choose your MAT SIDES AND DASH Color Options :*
Choose your MAT SIDES AND DASH OUTSIDE PIPING Color Options :*
Choose your Kicker/Ergo Options :*
ADDITIONAL PERFORMANCE PACKAGE OPTIONS*

Kommander STAGE 1 Performance Package. INSTALL STOCK MOTOR from Donor or Provided by Kommander with FULL BUILD PACKAGE [INCLUDED]Kommander Stage 2 Performance Package. Kommander will install our STAGE 2 Performance Package into your GP1 hull to our specific race-proven specs. A STAGE 2 Performance Package includes a custom ECU Tune and an aftermarket impeller to maximize the performance gain of the ECU Tune. [$1,200.00]Kommander Stage 3 Race Package. Kommander will install our STAGE 3 Performance Package into your GP1 hull to our specific race-proven specs. A STAGE 3 Performance Package includes a custom ECU Tune and an aftermarket impeller to maximize the performance gain of the ECU Tune and adjustable cam gears which we time. [$1,950.00]Kommander Stage 4 Performance Package. Kommander will install our STAGE 4 Performance Package into your GP1 hull to our specific race-proven specs. A STAGE 4 Performance Package includes a custom ECU Tune and an aftermarket impeller to maximize the performance gain of the ECU Tune, adjustable cam gears which we time, high-compression pistons, Solas12-vein pump with drop nozzle/trim cable/trim lever and gasket. [$6,950.00]Kommander Stage 5 Full Race Performance Package. Kommander will install our Stage 5 FULL RACE Performance Package into your GP1 hull to our specific race-proven specs. A Stage 5 FULL RACE Performance Package has a custom ECU Tune and an aftermarket impeller to maximize the performance gain of the ECU Tune, adjustable cam gears which we time, Race Cams, High Compression pistons, upgraded connecting rods, cylinder studs. Your Stage 5 FULL RACE Performance Package is tested and tuned to be ready to race when you get your GP1. REQUIRES MINIMUM 100 OCTANE RACE FUEL - NO PUMP GAS. [$11,800.00]
ELECTRONIC ECU TUNE OPTIONS*
ADDITIONAL JET PUMP OPTIONS*

INSTALL JET PUMP provided by CUSTOMER. YOU provide Kommander with a jet pump of your choice to install in my GP1 build [INCLUDED IN BASE BUILD PRICE]KOMMANDER WILL PROVIDE/INSTALL SOLAS 14-VEIN JET PUMP with NOZZLES and interchangeable pump rings [add $1,300.00]KOMMANDER WILL PROVIDE/INSTALL SOLAS 14-VEIN JET PUMP with DROP NOZZLE, TRIM CABLE and TRIM LEVER [add $2000.00] Choose trim lever color below:KOMMANDER WILL PROVIDE/INSTALL Skat Trak 14-vein Jet Pump with NOZZLES and interchangeable rings and trim nozzle. PLEASE NOTE: Skat Trak is no longer in business and we cannot guarantee availability of this item at the time of ordering. [IF AVAILABLE, this is a custom variable price, for GP1 Build Quote Cost is Estimated at $6000.00]
TRIM LEVER Color Options:*
IMPELLER OPTIONS*

KOMMANDER will INSTALL your stock impeller [INCLUDED in FULL BUILDS]KOMMANDER will PROVIDE/INSTALL Solas Stainless Steel Impeller 13/18 [add $425.00]KOMMANDER will PROVIDE/INSTALL Skat Trak Swirl Stainless Steel Impeller 13/19. PLEASE NOTE: Skat Trak is no longer in business and we cannot guarantee availability of this item at the time of ordering [add $450.00]
STEERING HANDLEPOLE OPTIONS*

KOMMANDER will PROVIDE/INSTALL RRP CAST HANDLEPOLE or similar with ALUMINUM Tubes and Adjustable Handlepole including Handlepole ends (top and bottom), Aluminum Handlepole Tubes, Steering System, Steering Stop, and Chin Pad. [INCLUDED in DONOR or FULL BUILD] Choose Color Options Below:KOMMANDER will PROVIDE/INSTALL RRP CAST HANDLEPOLE with CARBON Tubes and Adjustable Handlepole including Handlepole ends (top and bottom), CARBON Handlepole Tubes, Steering System, Steering Stop, and Chin Pad. [add $140.00] Choose Options Below:KOMMANDER will PROVIDE/INSTALL RRP LIGHTWEIGHT BILLET HANDLEPOLE with ALUMINUM Tubes, Adjustable Handlepole including BILLET Handlepole ends (top and bottom), ALUMINUM Handlepole Tubes, Steering System, Steering Stop, and Chin Pad.[add $400] Choose Options Below:KOMMANDER will PROVIDE/INSTALL RRP CBX CARBON HANDLEPOLE with CARBON Tubes and Adjustable Handlepole including CARBON Handlepole ends (top and bottom), CARBON Handlepole Tubes, Steering System, Steering Stop, and Chin Pad. [add $625.00] Choose Options Below:KOMMANDER will PROVIDE/INSTALL BLOWSION LIGHTWEIGHT BILLET HANDLEPOLE with ALUMINUM Centers and Adjustable Handlepole including BILLET Handlepole ends (top and bottom), ALUMINUM Handlepole Centers, Steering System, Steering Stop, and Chin Pad. [add $650.00] Choose Options Below:
Choose your RRP CAST HANDLEPOLE with ALUMINUM Tubes colors:*
Choose your RRP CAST HANDLEPOLE with CARBON Tubes colors:*
Choose your RRP LIGHTWEIGHT BILLET HANDLEPOLE with ALUMINUM Tubes colors:*
Choose your RRP CBX CARBON HANDLEPOLE ENDS colors:*
Choose your RRP STEERING SYSTEM colors:*
Choose your RRP CHIN PAD colors:*
Choose your RRP STEERING STOP colors:*
Choose your BLOWSION LIGHTWEIGHT BILLET HANDLEPOLE with ALUMINUM Centers colors:*
Choose your BLOWSION STEERING SYSTEM colors:*
Choose your BLOWSION CHIN PAD colors:*
KOMMANDER will PROVIDE/INSTALL Black Fat Handlebars [$0.00 INCLUDED IN COST OF BUILDS] Choose your FAT BAR Options :*
KOMMANDER will PROVIDE/INSTALL ODI Clamp-on Grips [$0.00 INCLUDED IN COST OF BUILDS] Choose your ODI Grip Options :*
THROTTLE LEVER

KOMMANDER will INSTALL STOCK THROTTLE LEVER from your donor ski [$0.00 INCLUDED IN COST OF BUILDS]
ADD-ON BILLET THROTTLE LEVER Options [add $85.00] :*
YOUR KOMMANDER GP1 BUILD TOTAL:
TOTAL USD:
YOUR INFO:

Please tell us who you are!
Name*

First NameLast Name
Address*

Street Address

Street Address Line 2

CityState / Province

Postal / Zip Code
Email*
example@example.com
Phone Number*
Please enter a valid phone number.
Do you have any additional NOTES for us on this build?
Please type any other info we need to know about for your build here.
Should be Empty:

Kommander GP1 Order Form

Kommander GP1 Components Color Chooser:

Kommander GP1 Graphics Color Chooser:

MATS

YOUR KOMMANDER GP1 BUILD TOTAL:

YOUR INFO: