Please complete the form below indicating each product and the quantities you would like to order. We will not ship any products until we have confirmed your order by telephone or e-mail.
If you have any additional questions please contact us at info@timberlinx.com or 1-877-900-3111.
All prices are listed in USD currency and do not include applicable sales taxes.
- A095 straight slots- Overall length 9.5"- Pin hole center to center 7-3/4"ALSO AVAILABLE IN STAINLESS STEEL;
* Half-connector' with one pin at the end* Overall length 4 3/4"* One slot with 7/8" internal thread at other end* 1 1/8 inch holes recommended for both pipe and pin* Pin hole center from end of pipe = 3 7/8" plus any exposed threaded rod from stand off to bottom of pipe (when connecting post to concrete and post to steel)* Pin hole center to center = 7 3/4" + exposed threaded rod (when you use two A475's + threaded rod to customize your own TIMBERLINX)ALSO AVAILABLE IN STAINLESS STEEL (A475SS)
* "Half-connector" two pins parallel at one end * AA675 two slots at one end, parallel, internal thread at other end * Overall length 6-3/4" * First pin hole center from end of timber=2-7/8" Second pin hole center from end of timber=5-7/8" (when connecting post to concrete and post to steel) * Pin hole center to center, first hole= 5-7/8", second hole 11-7/8" + exposed threaded rod (when you use 2 AA675's + threaded rod to customize your own TIMBERLINX) ALSO AVAILABLE IN STAINLESS STEEL
* Connector pins parallel * A135 straight slots * Overall length 13.5" * Pin hole center to center 11-3/4
* 'Half-connector' with one pin at the end * Overall length 6-3/4" * One slot with 7/8" internal thread at other end * 1 1/8 inch holes recommended for both pipe and pin * Can give you shear strength when joining beams to post * Pin hole center from end of pipe =5-7/8" (when connecting post to concrete and post to steel) * Pin hole center to center = 11-3/4" + exposed threaded rod (when you use two A675's + threaded rod to customize your own TIMBERLINX) ALSO AVAILABLE IN STAINLESS STEEL
* "Half-connector" two pins at right angle at one end* AB675 two slots at one end, two pins at right angle, internal thread at other end* Overall length 6-3/4"* First pin hole center from end of timber=3-7/8"* Second pin hole center from end of timber=5-7/8"* (when connecting post to concrete and post to steel)* Pin hole center to center, first hole= 7-3/4", second hole 11-3/4" + exposed threaded rod (when you use 2 AB675's + threaded rod to customize your own TIMBERLINX)
* Connector pins parallel * A155 straight slots * Overall length 15.5" * Pin hole center to center 13-3/4"
* Specially designed lag with deep-cutting threads * Use with TIMBERLINX A475, A675, AA675 or AB675 * Newel posts * Accurately join posts to sill beams or second floor posts, additions to existing timber frame or log buildings, posts to decks, and in endless situations where access is limited
* Connector pins at a right angle * B095 slots at 90º * Overall length 9.5" * Pin hole center to center 7-3/4
* Connector pins parallel * A175 slots at 90º * Overall length 17.5" * Pin hole center to center 15-3/4"
* Connector pins at a right angle * B155 slots at 90º * Overall length 15.5" * Pin hole center to center 13-3/4"
* Connector pins at a right angle * B175 slots at 90º * Overall length 17.5" * Pin hole center to center 15-3/4"
* 'Half-connector' with one pin at the end* Overall length 4 3/4"* One slot with 7/8" internal thread at other end* 1 1/8 inch holes recommended for both pipe and pin* Pin hole center from end of pipe = 3 7/8" plus any exposed threaded rod from stand off to bottom of pipe (when connecting post to concrete and post to steel)* Pin hole center to center = 7 3/4" + exposed threaded rod (when you use two A475's + threaded rod to customize your own TIMBERLINX)ALSO AVAILABLE IN STAINLESS STEEL (A475SS)
* 'Half-connector' with one pin at the end* Overall length 6-3/4"* One slot with 7/8" internal thread at other end* 1 1/8 inch holes recommended for both pipe and pin* Can give you shear strength when joining beams to post * Pin hole center from end of pipe =5-7/8" (when connecting post to concrete and post to steel)* Pin hole center to center = 11-3/4" + exposed threaded rod (when you use two A675's + threaded rod to customize your own TIMBERLINX)ALSO AVAILABLE IN STAINLESS STEEL
* "Half-connector" two pins at right angle at one end * AB675 two slots at one end, two pins at right angle, internal thread at other end * Overall length 6-3/4" * First pin hole center from end of timber=3-7/8" * Second pin hole center from end of timber=5-7/8" * (when connecting post to concrete and post to steel) * Pin hole center to center, first hole= 7-3/4", second hole 11-3/4" + exposed threaded rod (when you use 2 AB675's + threaded rod to customize your own TIMBERLINX)
8” x 7/8” concrete expansion anchor For use with A475 A675 AB675 and AA675
12" x 7/8" threaded rod to customize your TIMBERLINX A475, AA675 or AB675
12" x 7/8" threaded rod (with washer and nut) to customize your TIMBERLINX A475, AA675 or AB675
'Half-connector' with one pin at the end - Overall length 4 3/4" - One slot with 7/8" internal thread at other end- 1 1/8 inch holes recommended for both pipe and pin- Pin hole center from end of pipe = 3 7/8" plus any exposed threaded rod from stand off to bottom of pipe (when connecting post to concrete and post to steel) - Pin hole center to center = 7 3/4" + exposed threaded rod (when you use two A475's + threaded rod to customize your own TIMBERLINX) ALSO AVAILABLE IN STAINLESS STEEL (A475SS)
9 ½ “ long half-connector with slot for one expansion and 1 ¼ - 7 UNC internal thread at other end ( similar to A475) - 1 ½ inch diameter pipe with 6 inch expansion pin - Great for machine cut frames
* 9 ½ “ long half-connector with two slots for two expansions and 1 ¼ - 7 UNC internal thread at other end ( similar to AA475) * 1 ½ inch diameter pipe with 6-inch expansion pins * Great for machine-cut frames
* 19” long connector with a slot for expansion at each end (similar to A095) * 1 ½ inch diameter pipe with 6-inch expansion pins * Great for machine-cut frames
* 1 1/4 inch x 12 inches * For use with HDA095 and HDAA095
Set jig to drill pipe and pin holes in one operation - Works well in production work - Easily adjusts to different sizes of Timber - Can be used in round logs as well - Easily adjusted for various TIMBERLINX sizes - Comes with brass bushings for 1-1/8" drill bit
For use when 1 or 2 TIMBERLINX need drilling.
Designed for round logs and timbers not uniform in size.
* Fits on W0001 Drilling Jig for quick drilling * Pre-set pin holes for A475 AA675 A096 A135 A155 A175
* Fits on W0001 Drilling Jig * Pre-set pin holes for A475 AA675 A096 A135 A155 A175 * Great for drilling pre-assembled joints * Great for truss work
Made from solid machine steel - Helps to position slots exactly for insertion of pins - Brings joints into position and holds them there - Designed to fit in end of pipe for insertion
* Made from solid machine steel * Designed to fit over the machine bolt head * Applies force to the end of castings so pins can be inserted without expanding
For use with large timbers and logs Made from solid machine steel Designed to fit over the machine bolt head Applies force to the end of castings so pins can be inserted without expanding
* For use with large timbers and logs * Made from solid machine steel * Designed to fit over the machine bolt head * Applies force to the end of castings so pins can be inserted without expanding
7.5" x 1-1/8” single spur drill bit
* 17.5" x 1-1/8” drill bit * Fits the bushings on our drill guides
1 ½ inch drill bit for HD products