ADDITIVE MANUFACTURING LAB REQUEST FORM
Submit separate forms for 3D printing, characterization and post processing
Only one request per form is permitted. For scheduling purposes, submit separate forms for 3D printing, characterization and post processing. For 3D printing of multiple builds on the same project or multiple projects, a separate form for each build is required.
Location
*
Hamerschlag Hall
Mill 19
Hamerschlag Equipment
Equipment Requested - Hamerschlag
Please Select
3D Printing Machines
Characterization
Post Processing
3D Printing Machines - HH
*
Please Select
Aconity MIDI
EOS M290 Laser Powder Bed Machine
ExOne Innovent+ Binder Jet Machine
Freemelt One Electron Beam Powder Bed Fusion Machine
Optomec Aerosol Jet 300
Other
Characterization - HH
*
Please Select
Freeman FT4 Powder Rheometer
Granutools GranuDrum Powder Rheometer
Keyence VR-5000 Wide Area 3D Measurement System
Keyence VR-500 Series Scanner CMM
Post Processing - HH
*
Please Select
CM Furnace
Peenmatic Microblasting Equipment
Wire EDM Machining
Mill 19 Equipment
Note: EDM and CNC machining at Mill 19 should be submitted using this Machine Shop form (Link: https://form.jotform.com/230335691429155
Equipment Requested - Mill 19
Please Select
3D Printing Machines
Characterization
Post Processing
3D Printing Machines - Mill 19
Please Select
ExOne MFlex
Lincoln Electric ClassMate Laser (Hot Wire)
Lincoln Electric Wire Arc Additive Manufacturing (WAAM)
TRUMPF TruLaser Cell 3000 Laser Metal Deposition Machine
TRUMPF TruPrint 3000 Laser Powder Bed Machine
Other
Characterization - Mill 19
Please Select
Keyence VR-6000 Wide Area 3D Measurement System
Post Processing - Mill 19
Please Select
CM Furnace
Peenmatic Microblasting Equipment
Will your build require heat treatment in the CM Furnace?
*
Yes
No
Full Name
*
First Name
Last Name
Email
*
example@example.com
Mobile Phone Number
*
Please enter a valid phone number.
Department
*
Advisor
*
Oracle String
*
Project Information
Program
*
Please Select
ARL AI Enabled AM
ARPA-E HiTEMMP
DOE
MFI
NASA ULI
NASA Other
NETL Oxiperator
NIH
NSF
ONR-NSWCCD
PITA
PMIP-Manufacturing PA
SETO Hx
SETO Receiver
Industry Sponsored
CMU Class Build
Other
Project Title
*
Material
*
Work or Support Requested
*
Build Plates - 3D Printing
Build plates are required for the EOS M290 and TRUMPF TruPrint 3000. We have a number of them available for use. They must be returned within a few weeks for others to use or purchased with your build. A build plate or removable work surface is required for the TruLaser Cell 3000 and the Freemelt ONE. We do not have plates available. You must bring your own. Almost any size can be used so long as the plate isn’t so thin that it will warp during processing. For ease of programming, be sure the top and bottom surfaces of the plate are parallel and truly flat. Working with sloped, curved or complicated surfaces will require special programming.
Build Plate Use
*
Will bring my own
Request to keep build plate
Will return build plate
N/A
Build Plate Material
*
Please Select
Aluminum
C-Steel
Stainless Steel
Titanium
Other
N/A
Type and Length of Print
*
Single bead experiment - no powder
Single bead experiment - with powder
Short build (< 10 hrs)
Medium build (10-24 hrs)
Long build (>24 hrs)
Build Plates - EDM
If you are requesting EDM service, please note below whether you are using a plate purchased by your own research group, if you have borrowed a plate from the lab and plan to return it in less than one month, or if you have borrowed a plate from the lab and you intend to keep it.
Build Plate - EDM
Using my own build plate
Request to keep build plate
Will return build plate
Special Instructions
Include detailed instructions so the work planned can be understood and the time needed on the equipment can be estimated. For example, for furnace use include temperature, time and size (L x W x H) of plate/build/parts to be placed in the furnace. For machining, indicate if the parts need to be cut off the build plate, sectioning of parts is needed, the plate needs to be resurfaced and/or other (describe).
Write In Special Instructions Below
*
Upload Files
Upload STL file(s) (required for 3D printing and EDM work)
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Upload additional files such as drawings, sectioning illustrations, furnace profiles, etc. (as applicable)
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Submit
Should be Empty: