Daily Pre-Start Checklist - Dump Trucks Logo

  • DAILY PRE-START CHECKLIST - DUMP TRUCKS

  •  - -
  • Clear

  • Legend:

    OK - good order   N/A - Not Applicable

    F Fault Code -

     Category A Faults  -The machine NOT to be operated until the fault is rectified. Notify your supervisor immediately.

     Category B Faults - Machine NOT to be operated unless fault is rectified or operation approved by competent person (e.g. Manager/Supervisor),

     Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  • FROM THE GROUND - Damage, Wear, Leaks, Cracks, Cleanliness

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  •  Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  •  Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  •  Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  •  Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  • ENGINE COMPARTMENT - Levels, Leaks, Blockage, Damage, Indicators, Cleanliness

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  • ON THE MACHINE, OUTSIDE THE CAB (TOP PLATFORM) - Damage, Leaks, Cracks, Rust

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  •  Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  •  Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  • INSIDE THE CAB - Damage, Function, Levels, Cleanliness

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category A Faults  – The machine is NOT to be operated until the fault is rectified. Notify your supervisor immediately.

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category C Faults  - Corrective action required. Report the fault to the Manager/ Supervisor.

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  •  Category B Faults  - The machine is NOT to be operated unless the fault is rectified or operation approved by a competent person (e.g. Manager/Supervisor)

  • Should be Empty: