WAC WSIP COMPLIANCE
Date
-
Month
-
Day
Year
Date
Event:
Please Select
2025 CTE Wood Shop
2025 CTE Metal Shop
2025 CTE Theater
2025 CTE Engineering Lab
2025 STEM Lab
Inspected By:
Please Select
Dave
Doug
Morgan
School District & School Name:
On-Site Contact:
Shop Panoramic Photo:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-62-20004:
Floors Shall be Clean and kept free of oil and other slippery substances
Compliant
At-Risk
N/A
Safety Notes:
Safety Tape and Traction Treads installation\renewal is needed in all operator zones
Other
WAC 246-366-140 & 296-62-20004 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-806-20004:
Floors Shall be free of obstacles so there are no slip, trip, or fall hazards. Hazard areas shall be plainly marked. In metal and wood shops, areas around equipment shall be marked with a two-foot safety zone. Projections shall be plainly marked.
Compliant
At-Risk
N/A
Safety Notes:
Floors contain obstacles that may lead to slips, trips or falls. Recommend cleaning and organization
Other
WAC 246-366-140 & 296-806-20004 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-806-200:
All power tools shall be safe, properly labeled, and protected with correct belts, guards, and electrical connections.
Compliant
At-Risk
N/A
Safety Notes:
General updates to power tool safety, labels and guards are needed
Other
WAC 246-366-140 & 296-806-200 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 296-806-200, 296-806-20028 to 20034:
Machine guarding shall meet WAC 296-806. Safety guards must be properly adjusted and functional for safe machine operation.
Compliant
At-Risk
N/A
Safety Notes:
Safety guards are not properly installed
Safety guards are not installed
Other
WAC 296-806-200, 296-806-20028 to 20034 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-807-15050:
Hand tools shall be properly maintained and kept in a safe condition.
Compliant
At-Risk
N/A
Safety Notes:
Hand tools need organization
Hand tools need maintenance
Other
WAC 246-366-140 & 296-807-15050 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-800-11010:
General operating instructions and safety reminder signs shall be posted on or near moving machinery and shop equipment.
Compliant
At-Risk
N/A
Safety Notes:
Needs improvement, safety and operational signs should be posted to promote safe Power Tool Operation
Other
WAC 246-366-140 & 296-800-11010 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-800-11010:
Shop safety rules be displayed in plain view of room occupants.
Compliant
At-Risk
N/A
Safety Notes:
Shop safety rules need to be updated
Shop safety rules are not visible
Other
WAC 246-366-140 & 296-800-11010 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-806-20002:
Unstable equipment (e.g., drill presses, band saws, etc.) shall be secured to the floor or a table/stand to prevent tipping. Stand mounted equipment shall be fastened to the floor to prevent tipping.
Compliant
At-Risk
N/A
Safety Notes:
All Power Tools need to be bolted down or bolted into a dedicated roller tray with foot brakes to mitigate seismic risks
Other
WAC 246-366-140 & 296-806-20002 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-800-22035:
Materials (e.g., lumber, metal, etc.) shall be stored in a manner that will prevent personal injury. Proper storage shall be provided for metal stock as required by WISHA.
Compliant
At-Risk
N/A
Safety Notes:
Lumber Rack with retention chains is needed to reduce risk of fall hazards
Other
WAC 246-366-140 & 296-800-22035 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-24-95605 & IFC 605.3:
All electrical panels, devised and connections shall be labeled and maintained in a safe condition. Nothing shall be stored 36" in front of or 18" to the side of electrical panels.
Compliant
At-Risk
N/A
Safety Notes:
Need to remove any objects in front of electrical panels to ensure clear access in the event of an emergency
Other
WAC 246-366-140, 296-24-95605 & IFC 605.3 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-155-020 & 173-303:
Hazardous and/or combustible waste shall not be allowed to accumulate. Such waste shall be removed from the shop area and properly disposed of as required by DOE regulations.
Compliant
At-Risk
N/A
Safety Notes:
Hazardous cabinet is needed to store all hazardous materials when not inactive use, cull all excess to reserve room for all hazardous materials
Other
WAC 246-366-140, 296-155-020 & 173-303 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 173-303:
Waste oil storage and disposal shall comply with DOE regulations. Oil spilled around storage barrels shall be cleaned up immediately. Containers need to be closed when not in use.
Compliant
At-Risk
N/A
Safety Notes:
Waste oil storage does not comply with DOE regulations
Waste oil storage area needs cleaning and organization
Other
WAC 246-366-140 & 173-303 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140:
A non-asbestos fire blanket shall be provided, identified, readily available, and visible to students & staff.
Compliant
At-Risk
N/A
Safety Notes:
Not available, needs to be provided and installed in an accessible area
On site, but needs to be relocated to a more visible/accessible area
Other
WAC 246-366-140 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-800-22035:
Project storage shall be adequate and safe.
Compliant
At-Risk
N/A
Safety Notes:
Project storage area needs cleaning & organization
Other
WAC 246-366-140 & 296-800-22035 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-800-15030:
Emergency eye wash stations shall be within 50 feet or ten seconds of all student workstations and shall provide 2.5 gpm for at least 15 minutes at 25 PSI or less. Bottled water eye wash stations do not meet the current WISHA and DOH requirements. They may be supplementary to units meeting the above specifications.
Compliant
At-Risk
N/A
Safety Notes:
Need an approved plumber to install a eye wash station to be prepared for an emergency
Eye wash station needs maintenance, flow is not adequate
Eye wash station is blocked, area needs organization & cleaning
Other
WAC 246-366-140 & 296-800-15030 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-806-40502 & 40510:
All grinders shall have proper tool rests and eye safety shields.
Compliant
At-Risk
N/A
Safety Notes:
Grinder is unsafe, eye guards and tool rests should be mounted correctly to prevent risk of injury
Recommend replacement with a double wheel grinder with a fine stone and wire wheel for woodshop tools
Other
WAC 246-366-140 & 296-806-40502 & 40510 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-24-70003, 296-800-16040 & 16045 & ANSI 2.87.1:
Eye protective devises (safety glasses, and full-face shields) are identified, visible, readily accessible, and used by students and staff.
Compliant
At-Risk
N/A
Safety Notes:
Eye protective devises storage needs cleaning & organization
Eye protective devises storage needs adequate labels/signs
Other
WAC 246-366-140, 296-24-70003, 296-800-16040 & 16045 & ANSI 2.87.1 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-24-71503 & 296-24-71505:
Mechanical ventilations shall be provided for all arc and gas welding/cutting tables in order to prevent welding vapors from traveling through the breathing zone.
Compliant
At-Risk
N/A
Safety Notes:
Shop ventilation needs improvement
Shop ventilation needs to be installed
Other
WAC 246-366-140, 296-24-71503 & 296-24-71505 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-24-69007 & 296-24-71501:
Welding curtains or shields shall be provided at booths and other welding areas.
Compliant
At-Risk
N/A
Safety Notes:
Welding curtains need to be installed
Other
WAC 246-366-140, 296-24-69007 & 296-24-71501 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, & 296-800-11010:
Safety signs should be posted where needed; e.g., "turn on ventilation", "wear eye protection." L&I does not require signs; but when signs are utilized, uniform design, including wording, shape and color, are mandated.
Compliant
At-Risk
N/A
Safety Notes:
Needs improvement, safety and operational signs should be posted to promote safe Power Tool Operation
Other
WAC 246-366-140, & 296-800-11010 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 209-806-20012 & IFC 3503.1.3:
Master shut-offs shall be provided and identified for electricity and gas in all shop areas. A shut-off for water is recommended but not required.
Compliant
At-Risk
N/A
Safety Notes:
Need an approved electrician to install a Master Power Switch to cut off all Power Tool power quickly in the event of an emergency
Master shut-offs need label/sign updates
Other
WAC 246-366-140, 209-806-20012 & IFC 3503.1.3 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-24-68201, 3 & IFC 3003:
Compressed gas cylinders must be properly labeled, stored and secured, with caps in place, to prevent damage to the cylinder valve. Cylinder restraining devices must be adequate to prevent tipping and/or "rocketing." In-use cylinders must be secured either to a hand-truck or structure.
Compliant
At-Risk
N/A
Safety Notes:
Compressed Gas Cylinders need to be chained upright to reduce risk of falling\rocketing
Other
WAC 246-366-140 & 296-24-68201, 3 & IFC 3003 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-24-68507 & 296-24-70003:
The gas welding/cutting area shall comply with state fire code and WISHA requirements. Eye protection shields shall be provided.
Compliant
At-Risk
N/A
Safety Notes:
Eye protection shields are not provided
Eye protection shields need updates/maintenance
Other
WAC 246-366-140, 296-24-68507 & 296-24-70003 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-24-33009, IFC 3404-3:
All flammable liquids shall be stored in UFC and NFPA approved flammable storage cabinets with self-closing doors. Flammable wastes must be disposed of in approved flammable waste containers. Cabinets shall be locked or located in a locked room when not in use.
Compliant
At-Risk
N/A
Safety Notes:
Hazardous cabinet is needed to store all hazardous materials when not inactive use, cull all excess to reserve room for all hazardous materials
Hazardous cabinet is not locked
Hazardous cabinet is full, cull
Hazardous cabinet is inaccessible, area needs cleaning & organization
Other
WAC 246-366-140, 296-24-33009, IFC 3404-3 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-24-33009 & IFC 3405:
All solvents for parts cleaning shall be stored in approved containers. Class 1 flammable liquids shall not be used. Fusible links on solvent tank lids shall be in place and shall operate as designed.
Compliant
At-Risk
N/A
Safety Notes:
Hazardous cabinet is needed to store all hazardous materials when not inactive use, cull all excess to reserve room for all hazardous materials
Hazardous cabinet is not locked
Hazardous cabinet is full, cull
Hazardous cabinet is inaccessible, area needs cleaning & organization
Other
WAC 246-366-140, 296-24-33009 & IFC 3405 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-365-140 & IBC Ch.28:
Wood burning stoves shall not be used in school buildings.
Compliant
At-Risk
N/A
Safety Notes:
Wood burning stove needs to be removed
Other
WAC 246-365-140 & IBC Ch.28 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-24-370, 296-62-11019 & IFC 1504:
Flammable finish areas and paint spray rooms shall have approved ventilations, filters, lighting, storage cabinets, and separation from other rooms.
Compliant
At-Risk
N/A
Safety Notes:
Approved ventilation is needed
Adequate lighting for tasks is needed
Appropriate storage is needed for flammable/hazardous materials
Other
WAC 246-366-140, 296-24-370, 296-62-11019 & IFC 1504 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-24-370 & 296-62-11019 & IFC 1504:
Filters in the paint spray booth/room shall be changed or cleaned as required.
Compliant
At-Risk
N/A
Safety Notes:
Finishing area needs routine replacement\installation of filters to reduce toxicity
Other
WAC 246-366-140, 296-24-370 & 296-62-11019 & IFC 1504 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-24-370 & IFC 1503:
Only Class 1 electrical, explosive-proof lights, fan or other electrical devices shall be allowed in flammable finish areas.
Compliant
At-Risk
N/A
Safety Notes:
Upgrade to Class 1 electrical fixtures is needed
Other
WAC 246-366-140, 296-24-370 & IFC 1503 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140 & 296-62-11003:
Ventilation and exhaust systems shall be installed in all shop areas in compliance with L&I WISHA rules.
Compliant
At-Risk
N/A
Safety Notes:
Ventilation & exhaust systems need to be installed
Additional ventilation & exhaust systems need to be installed
Other
WAC 246-366-140 & 296-62-11003 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 246-366-140, 296-62-11003 & IFC 1903:
Chip and sawdust collection systems shall be installed in all wood shops.
Compliant
At-Risk
N/A
Safety Notes:
Chip and sawdust collection systems need to be installed
Additional chip and sawdust collection systems need to be installed
Other
WAC 246-366-140, 296-62-11003 & IFC 1903 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
OSPI VOCATIONAL SAFETY GUIDE & WAC 296-806-20004:
Non-skid surfacing shall be used within the operator use on of all stationary equipment.
Compliant
At-Risk
N/A
Safety Notes:
Safety Tape and Traction Treads installation\renewal is needed in all operator zones
Other
OSPI VOCATIONAL SAFETY GUIDE & WAC 296-806-20004 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WSRMP Recommendations & WAS 296-806-200:
Annual Professional Maintenance:
Compliant
At-Risk
N/A
Safety Notes:
Annual Professional Maintenance is provided by www.nwptrs.com
Annual Professional Maintenance will be provided by www.nwptrs.com going forward
Other
WSRMP Recommendations & WAS 296-806-200 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WSRMP Recommendations & WAS 296-806-200:
Monthly Inspection documented:
Compliant
At-Risk
N/A
Safety Notes:
Recommend Instructor maintain a monthly Checklist of safety and repair issues that arise in the shop
Other
WSRMP Recommendations & WAS 296-806-200 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAS 296-807-14025:
Air Hoses/Fitting/Nozzles on site:
Compliant
At-Risk
N/A
Safety Notes:
Adequate Air Hoses/Fittings/Nozzles are needed in the shop
Other
WAS 296-807-14025 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC - 196-800-17015:
MSDS Provided in Shop:
Compliant
At-Risk
N/A
Safety Notes:
Not visible, need to maintain an MSDS binder in the shop with Safety Data Sheets for all hazardous materials
Updates to the MSDS are needed
Other
WAC - 196-800-17015 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 2960828-20020:
Solvent Containers Labeled:
Compliant
At-Risk
N/A
Safety Notes:
Solvent Containers need updates to be in compliance
Other
WAC 2960828-20020 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 296-24-33009 & IFC 3405:
Proper Containers for Flammables:
Compliant
At-Risk
N/A
Safety Notes:
Proper container for flammables is needed on site
Other
WAC 296-24-33009 & IFC 3405 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 296-800-210:
Adequate Lighting for Tasks:
Compliant
At-Risk
N/A
Adequate Lighting for Tasks:
Lighting needs improvement
Other
WAC 296-800-210 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
American Red Cross Classroom Safety Checklist:
Items Stored on Lower Shelves:
Compliant
At-Risk
N/A
Safety Notes:
Need to heavy objects currently stored above, to a lower space to mitigate risk of fall hazards
Other
American Red Cross Classroom Safety Checklist Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 296-24-567:
Emergency Procedures Posted:
Compliant
At-Risk
N/A
Safety Notes:
Need update of emergency signs to clearly convey direction to students in the event of an emergency
Other
WAC 296-24-567 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 296-24-56701:
Fire Evacuation Routes Posted:
Compliant
At-Risk
N/A
Safety Notes:
Need update of emergency signs to clearly convey direction to students in the event of an emergency
Other
WAC 296-24-56701 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 296-800-30015:
Fire Extinguishers Charged/Operable:
Compliant
At-Risk
N/A
Safety Notes:
Fire extinguishers are not charged or expired
Additional fire extinguishers need to be installed
Other
WAC 296-800-30015 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 296-24-95607:
GFCI within 6' of a Sink:
Compliant
At-Risk
N/A
Safety Notes:
Need an approved electrician to install GFCI into any outlet within 6' of the sink
Other
WAC 296-24-95607 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
File Upload
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
WAC 296-24-95607:
Exit Paths Clear:
Compliant
At-Risk
N/A
Exit Paths Notes:
Exit paths are blocked, cleaning & organization is needed
Other
WAC 296-24-95607 Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
American Red Cross Classroom Safety Checklist:
Cabinets Secured to Wall or Floor:
Compliant
At-Risk
N/A
Safety Notes:
Cabinets are not secured properly to the wall
Cabinets are not secured properly to the floor
Other
American Red Cross Classroom Safety Checklist Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Back
Next
Save
Save
Submit
Safety Review:
Record any other safety items or recommendations that were not covered in the previous questions.
Safety Recommendations:
Additional Safety Photos:
Browse Files
Drag and drop files here
Choose a file
Cancel
of
Save
Submit
Should be Empty: