You can always press Enter⏎ to continue
India Bungy Jump Professionals Training Assessment
49
Questions
START
Language
English (UK)
Hindi
1
Name
*
This field is required.
First Name
Last Name
Previous
Next
Submit
Press
Enter
2
Email
*
This field is required.
example@example.com
Previous
Next
Submit
Press
Enter
3
1. Where did modern Bungy Jumping take its inspiration from?
Olympic High Divers, Greece
Land Jumpers, Pentecost Island
Sky Diving, New Zealand
Ski Jumpers, Austria
Previous
Next
Submit
Press
Enter
4
2. Which country currently hold the title for worlds highest Bungy Jump?
Macau
Nepal
India
China
Previous
Next
Submit
Press
Enter
5
3. What country popularized Bungy Jumping commercially?
New Zealand
Japan
Australia
India
Previous
Next
Submit
Press
Enter
6
4. When did the first commercial Bungy Jump open?
1994
1969
1988
1990
Previous
Next
Submit
Press
Enter
7
5. What is the height of the Zhangjiajie Bridge Bungy Jump?
198m
220m
310m
260m
Previous
Next
Submit
Press
Enter
8
6. What is the weight range for a red Bungy Cord?
40kg - 60kg
60kg - 80kg
80kg - 100kg
Previous
Next
Submit
Press
Enter
9
9.When commissioning a new rope, what is the minimum number of test jumps?
3 - max,min and a test jump
1 - maximum weight
1 - minimum weight
2 - maximum and minimum weight
Previous
Next
Submit
Press
Enter
10
10. A jumper weighs 130kg what combination of ropes should they jump on?
Blue and Red
Black and Green
Green and Red
They are too heavy to jump
Previous
Next
Submit
Press
Enter
11
11. A jumper weighs 55kg what combination of ropes should they jump on?
Red
Black and Green
Green
Blue
Previous
Next
Submit
Press
Enter
12
13. You are commissioning a new green cord which is 10m long what would be the minimum acceptable stretch of the cord?
15m
30m
25m
35m
Previous
Next
Submit
Press
Enter
13
14. What is the maximum allowable stretch of a bungy cord in normal operations?
3 times
4 times
5 times
6 times
Previous
Next
Submit
Press
Enter
14
15. When inspecting a red cord that has 1500 strands there are a total of 70 broken strands. Is it ok to continue using it ?
No - withdraw immediately
Yes
Yes but not with heavy people
Yes, but the cord should be changed to green colour
Previous
Next
Submit
Press
Enter
15
16. Upon inspecting a cord, it appears a paint like substance has been spilt on the cord. You should ?
Withdraw cord from use
Remove the outer wrap and put powder on
Carry on using if it is a small patch
Previous
Next
Submit
Press
Enter
16
17. What is the core principle of maintaining safety in Bungy Jumping?
Having fun
Redundancy
Using expensive equipment
Previous
Next
Submit
Press
Enter
17
18. If a Bungy cord gets wet, we should?
Put in the sun to dry
Store the cord until it drys out
Stretch out the cord and apply talcum powder
Continue as normal, the rubber is protected
Previous
Next
Submit
Press
Enter
18
19. If there is big storm, is it okay to continue jumping?
Yes, as long as there is protection for guests
Yes if it looks like it won't rain for very long
No, heavy rain causes damage to cords and lightening is a risk to staff and guests
Previous
Next
Submit
Press
Enter
19
20. Why do we record each jump?
A check list to ensure all safety checks are made
To record how many jumps have been made
Provide data required to ensure cord performance
All of the above
Previous
Next
Submit
Press
Enter
20
21. Which of the following medical conditions is OKAY to jump?
Heart Problems
Fear of heights
Back or Neck problems
Respiratory Conditions (eg Asthma)
Hypertension
Pregnancy
Previous
Next
Submit
Press
Enter
21
22. A 15 year old wants to jump, but they are only 35Kg what should we do?
Refuse the jump, they are under weight
Let them jump, if they agree to accept the risk of being 5Kg under weight
Let the jump with a member of staff (subject to availability)
Previous
Next
Submit
Press
Enter
22
23. What is the primary purpose of the webbing embeded in a Bungy Cord
Prevent the cord from over stretching and adding redundancy
To distinguish the colours of the ropes
Makes the cord less stretchy
Reduces the amount of rubber required in a cord
Previous
Next
Submit
Press
Enter
23
24. What is the main function of the capstan
Ensures the jumper cord is in the correct location
Allows correct callibration of the bungy cord
Increases friction to reduce load on rope brake
Protects the Bungy cord
Previous
Next
Submit
Press
Enter
24
25. Why do we use a secondary shock cord
Because it is connected to the counterweight
Improves jump safety by having a second cord for redundancy
Useful only for couple jumps
Allows us to use a smaller rope for the main cord
Previous
Next
Submit
Press
Enter
25
26. As a Bungy cord wears, over time
It is expected that it will stretch more than when it was new
it will continue to perform the same
it will perform better
Previous
Next
Submit
Press
Enter
26
27. When radios stop working between the ground and jumps deck we
Stop all jumps until the radios are fixed
Continue jumping, using hand signals to communicate
Jump Master takes control of jumper heights and checking jumping area is clear
Previous
Next
Submit
Press
Enter
27
28. Why do we record the jumper height above the ground?
So we understand how the ropes are performing
To give a prize to the closest to the water each day
To see which jump style is the best
To make sure jumpers are on the correct rope
Previous
Next
Submit
Press
Enter
28
29. Before starting the jump process we must
Ensure the customer has registered, confirming medical conditions
Ask the customer to remove anything from their pockets
Remove/Tie loose fitting shoes
All of the above
Previous
Next
Submit
Press
Enter
29
30. If a customer is nervous, we should?
Tell them to hurry up and jump they have a time limit
Provide them with positive encouragement to jump
Send them back to registration
Remind them they dont get a refund and there is a queue
Previous
Next
Submit
Press
Enter
30
31. What material are bobbins be made of?
Plastic
Nylon
Steel
Composite
Previous
Next
Submit
Press
Enter
31
32. What action should be taken if a bungy cord becomes out of date or reaches the maximum number of jumps?
Continue use with caution
Repair it
Stop using and destroy
Sell to another operator
Previous
Next
Submit
Press
Enter
32
33. What is the purpose of cord binding on a Bungy Rope?
Improve elasticity
Prevent stretching
Hold cord threads in desired position
Increase cord weight
Previous
Next
Submit
Press
Enter
33
34. What should be the characteristics and specifications of the cord binding material?
Different from the cord material
Similar to the cord material
Heavier than the cord material
A different colour to the cord material
Previous
Next
Submit
Press
Enter
34
35. What information must be permanently marked on both ends of each bungy cord?
Personal identification number
Date of purchase
Current number of jumps
Manufacture date, serial number and expiry date
Previous
Next
Submit
Press
Enter
35
36.How often should the Owner ensure that the usage and conditions of individual bungy cords conform to the original approved cord design?
Monthly
Every 3 months
Continuously
Every 100 jumps
Previous
Next
Submit
Press
Enter
36
37.What are the three extension tests that every new bungy cord must undergo before being put into use for the public?
Jump height, weight range, and serial number
Dummy load, trialjump, and cord material inspection
Minimum designedJumper weight, maximum designed Jumper weight, and trial jump
Compliance check,jump life evaluation, and stretch test
Previous
Next
Submit
Press
Enter
37
38. What is the minimum breaking load requirement for an end attachment on a bungy cord?
500Kg
1000Kg
500Kg
2000Kg
Previous
Next
Submit
Press
Enter
38
39. When should a bungy cord be visually inspected over its whole length and circumference?
Monthly
At the start/end of a days operation
Once a week
When visibly damaged
Previous
Next
Submit
Press
Enter
39
40. Under what circumstances should a bungy cord be withdrawn from use besides reaching its designed jump life?
Exposure to more than 250 houts of sunlight
3 months are manufacture
2% of threads are broken
5% of threads exhibit wear
Previous
Next
Submit
Press
Enter
40
41. What should be done with bungy cords to be disposed of?
Sold to another operator
Stored for future emergency use
Destroyed and cut into lengths of 1m
Keep for use for training
Previous
Next
Submit
Press
Enter
41
42. What daily checks should a Competent Person carry out on the bungy cord during a day's operation?
Checking for abnormalities only at the start/end of the day
Perform a cycle test
checking cord extension at static condition
Monthly visual inspection
Previous
Next
Submit
Press
Enter
42
43. What are the conditions that can lead to the discontinuation of a cycle frequency test for a bungy cord?
Dynamic load increases
More than 10% of threads exhibit wear
Unloaded lengthdecreases
No broken threads areobserved
Previous
Next
Submit
Press
Enter
43
44. What are the specific test conditions for the cycle frequency test of a bungy cord?
Indoor controlled environment
Typical ambient temperature
High atmospheric pressure
Sub-zero temperature
Previous
Next
Submit
Press
Enter
44
45. What type of harness should be used for bungy jumping according to the information provided?
Any harness withankle strapping
Partial-body harness
A full-body harness
No harness required when using ankle straps
Previous
Next
Submit
Press
Enter
45
46. What should be done during the visual inspection of a bungycord at the start and end of a day's operation, especially for cords with protective covers?
Replace the cord
Remove the cover for inspection
Only inspect visible parts
No inspection required if thew cord is new
Previous
Next
Submit
Press
Enter
46
47. Under what circumstances should a bungy cord be withdrawn from use besides reaching its designed jump life?
After 6 months sincethe manufacturing date
Exceeding the expirydate recommended by the manufacturer
10% of threadsexhibit wear
All of the above
Previous
Next
Submit
Press
Enter
47
48. What should the minimum breaking strength of a harness be?
500Kg
1000kg
1500kg
2000Kg
Previous
Next
Submit
Press
Enter
48
49. What type of carabiners should be used, and what should betheir minimum breaking load?
Autolock, 1500Kg
Screw gate 1500Kg
Autolock, 2000Kg
Screw gate, 2000Kg
Previous
Next
Submit
Press
Enter
49
50. What procedures are checked and verified by both Jump Master and Jump Operator before attaching the Jumper to the rigging system?
Exclusion of the public and Jumper registration
Final inspection byanother person and final instructions to the Jumper
Security checks and lock up
Security and proper fitting of the harness system, adjustments of the rigging system, selection ofthe bungy cord, and attachment of the bungy cord to the rigging system
Previous
Next
Submit
Press
Enter
Should be Empty:
Question Label
1
of
49
See All
Go Back
Submit