• Hand Tool Safety Training

    Hand Tool Safety Training

  • Course Duration: 90 Minutes

    Burnt Mountain LLC. Learning Management System (BMLMS)

  • Date*
     - -

  • Hand Tool safety Training Video

  • Different Kinds Hand Tools

  • Hand Tool Safety Training Test

  • 1. Never strike and object with the ____ of a hammer.
  • 2. Always strike an object with the ____ of the hammer head.
  • 3. A hammer with a loose head is dangerous.
  • 4. When tightening a hammer head use a ____.
  • 5. When swinging a hammer, grip the _____ at the end in order to increase the length of the lever arm.
  • 6. Gripping a hammer handle at its end will increase the ____ of the impact.
  • 7. Never use a tool handle as a pry bar.
  • 8. A screwdriver is to be used for tightening and loosening ____.
  • 9. The screwdriver is made up of three principal parts- the handle, the shank, and the ____.
  • 10. Pounding on a screwdriver can ___ or damage the handle.
  • 11. A screwdriver should be used only for ____ with the proper type heads.
  • 12. Never use a screwdriver as a ____.
  • 13. Some of the types of plyers include ____.
  • 14. Plyers should be kept ____.
  • 15. Plyers should not be used to tighten ____. This is the job of wrenches.
  • 16. Use wrenches that fit the nut or bolt ____.
  • 17. When loosening a nut with a wrench, you should ____ and not push the wrench.
  • 18. When using an adjustable crescent wrench, the pulling force should be exerted against the stationary jaw.
  • 19. A crescent wrench is not meant to loosen ____ nuts or bolts.
  • 20. A crescent wrench should be kept ____.
  • 21. The pipe wrench (monkey wrench) pulling or pushing force should be exerted only in the direction that the jaw opening is facing.
  • 22. Unlike the crescent wrench, the pipe wrench is ideal for ____ or stubborn nuts and bolts, pipes, or any other threaded round objects.
  • 23. When using a pipe wrench, never attach a cheater bar to extend the length of the wrench.
  • 24. If you need additional leverage on a pipe wrench, use a wrench with a ____ handle.
  • 25. When gripping a bolt with a pipe wrench, the bite should be taken at the center of the jaws.
  • 26. The box wrench is ideal for getting a good grip in tight places.
  • 27. A cold chisel is not designed for cutting hardened steel.
  • 28. The rule of thumb is that if the metal resists filing, it is too ____ for a cold chisel.
  • 29. A cold chisel works great for ____.
  • 30. When striking metal against metal, you should protect yourself against flying metal chips.
  • 31. A Rip saw is used for cutting ____ the grain.
  • 32. The Cross-Cut saw is used to cut ____ the grain.
  • 33. Never use the _____ tool for the job.
  • 34. Keep your tools clean, organized, and in good working condition.
  • 35. If you see someone using the wrong tool for the job, stop them and help them understand what tool should be used for the job.
  • Should be Empty: