LO/COi Installation Checklist

LO/COi Installation Checklist
Technician Name*

First NameLast Name
Technician Email*
example@example.com
RCOS Case Number*
Installation Date*

MonthDayYear
Date
Hour MinutesAM/PM Option
Select Model and Ink Configuration*
prevnext( X )
CO-300i-F2
Roland CO Series Professional UV Flatbed & Hybrid Printers

$ Free Ink Configuration



LO-640i-F3
Roland LO Series Professional UV Flatbed & Hybrid Printers

$ Free Ink Configuration



CO-640i-F3
Roland CO Series Professional UV Flatbed & Hybrid Printers

$ Free Ink Configuration
Check for shipping damage and notate below.
Add pictures of any shipping damage.

Cancelof
Refer to the CO Installation Guide located on Imaginet for details of steps below

Remove the printer from its shipping positionRemove the printer bed from the palletTransfer the printer bed to its final positionRemove the frame supportsLevel table by adjusting leveling feet at the four corners. Keep middle leveling feet off of the floor until a later stepAttach printer mounting plates to printer bed making sure they are oriented correctlyTransfer the printer gantry to the bed and place on the mounting platesSecure printer to mounting platesRemove transport beam (Note - Printer should not be lifted without the transportation beam being in place)Connect printer cables to from table to printer. (Do not connect to power at this point)Ensure the emergency cut-off switches are de-activatedEnter Tower Service Mode to disable functions for service adjustmentsStart printer and follow steps in guide to fill with inkZ Square check/adjustmentX Square check/adjustmentLevel table surface with dial gaugeReset the X Origin pointReset the Z Origin pointAuto Z Laser Sensitivity Adjustment (If necessary)Lower vacuum pumps to 80% unless 100% is deemed necessary for substrate
Serial Number*
Printer static IP address
Firmware Version
Required Service Level Calibrations

Set Date and TimeBias/VerticalM-Gap DefaultFlushing Adjustment (COi)Cap Height Adjustment (LO)
Picture of nozzle test print

Cancelof
Take Photo
Printer Operation Training

Media Load ProcedurePrint Quality AdjustmentsWeekly MaintenanceConsumable Items
Initials for operation training and maintenance being complete*
Software Installation and Connection

VersaWorks installed and connectedVersaWorks Test Print file loaded and printed from customer computerDG Connect installed and connectedRoland TV – Support and Training videos (www.rolanddga.com/gallery/roland-tv)User Manuals and Download Center (https://downloadcenter.rolanddg.com/)
Are any unused parts being returned?*
Additional notes
Owner/Supervisor Name*

First NameLast Name
Owner/Supervisor Email
example@example.com
Signature of owner/supervisor acknowledging installation being complete
Operator's Name*

First NameLast Name
Operator's Email
example@example.com
Signature of operator acknowledging training being complete
Should be Empty: