Spec Confirmation

Pre-Qualifying Specification Form
Your Name/Business Name*
Phone Number*

CodeNumber
Email*
example@example.com
Business Name (If applicable)
To ensure we are comparable and economically sound when it comes to our quotes, it is important we set the right expectation to begin with to make sure we meet your needs and your customers needs entirely.

As your specification is important to us, the following questions will help us identify and quote a price point that will align with your answers.
Are there any doors from the below list that you provide to your customers? tick any that apply*

Non standard hung or cavity doors (over 2200 high)Barn Door/sHidden DoorsFire DoorsBi-Parting doors
Most Common Door Height*
Which Jamb do you anticipate using? *
Please choose which core you commonly use?*
Architraves - which size do you use regularly?*

40x10mm60x10mm60x18mmNot RequiredOther - please specify below
Based on your architrave size, which profile is most common?

Single BevelD4S - Dressed Four Sides (Square)Splayed/TaperedColonial
Which cavity pocket manufacturer do you prefer?

CS for DoorsCowdroyOther
Inside your cavity door leaves, do you use Steel 1 side or 2 sides to minimise bowing?*
Do you generally require hardware or cropping?*
Do you have a standard spec or range of hardware that you use? https://www.barndoors.co.nz/door-handles-hardware/.
If nothing is available here, we have a wide range to choose from so can provide options if neccessary.

By obtaining the hardware component from us we can ensure that the machining is correct and accurate to create minimal efforts whilst installing.
As you have selected no hardware cropping/machining, do you anticipate partial cropping (e.g, no hinging, add magnets in storage doors etc), or something else.
If you know what hardware you want us to spec, please specify in the below box, please note we would intend to match hinge color also.
What would you like the doors to look like?*
What detail of groove would you like? *
Because you have selected V Groove, bare in mind a 4mm skin will be required (38mm door thickness)
Do you require site measures?

YesNo
On a Site Measure we will ensure all framing is correct for the jamb intended. We will also review floor clearances to ensure appropriate clearance over finished floor covering will result. We will communicate any amendments required to the appropriate person to make sure things go smoothly once the doors arrive on site.
If you have any documentation you think we may find useful like plans or in-house company specs or details you use, feel free to upload it below.

Cancelof
Any additional comments, questions or notes, please put them in the box below...
Should be Empty:

Pre-Qualifying Specification Form