Walkie Stacker Tool Box Talk

Walkie Stacker Tool Box Talk

10 very important questions you should know. onsiteforkliftlicencing.com
Select Correct Answers

1 answer per question.
1. How could you find out the lifting capacity of a walkie stacker before deciding to lift a load?*

its the same as the model numberread the data plateask the supervisor
2. What is the most common load centre distance on a walkie stacker's data plate?*

1200mm800mm600mm450mm
3. On an evenly spaced load which is 1200mm x 1200mm, the centre of gravity of the load would be:*

1500mm750mm600mm
4. The load centre distance shown on a data plate is measured from;*

the heel of the forksfrom the rear wheel
5. You should charge lead/acid batteries in a ventilated area because the gas they produce could;*

suffocate youcorrode battery teminalsexplodeover heat the battery pack
6. You must keep the control arm down while operating the walkie stacker as there is a safety cut out switch to protect you from being crushed. Look at the picture below, which button is the safety cut out switch;*

the grey buttonthe yellow buttonsthe red button
7. When travelling longer distances the walkie stacker should be;*

in front of youbehind you
8. If you notice the walkie stacker took longer to stop by itself when the control arm was released you would ;*

make sure you release the control arm soonerstop using it and tag it outtell the supervisor when you see them next
9. What are two things that could happen if the load on the walkie stacker is uneven?*

load could fall, walkie stacker could tip overnothing as long as the travel is slow
10. What is the gross weight of the load in the picture. Each bag weighs 20kg and the pallet weight 15kg.*

415kg500kg700kg715kg
Calculator

Walkie Stacker Tool Box Talk

Select Correct Answers

Your score is.