Bread 'n' Butter Camper Builder

Vehicle Make?

Ram Model?

Nissan Model?

Ford Model?

Chevy/GMC Model?

Jeep Model?

Toyota Model?

Full Size Bed Length

Mid Size Bed Length

Vehicle Year?

ATTENTION FORD MAVERICK OWNERS

Alright, you know your truck is a little diffferent than most. That's okay, we're not here to judge, but here's some information you need to know:

- Your sleeping platforms are will have a maximum length of 76" (head-to-toe). This gives you ~16" of passthrough space from edge of bed to the rear wall. We can make your bed shorter/this space larger upon request.

- Unless you want to chop down the front corners of your truck bed, we can only build you a standard-width camper, no Chubbys.

- If you want to cut the front corners of your bed to make them square, we can build you a wider standard-width camper or a Chubby version (probbaly). Reach out to us for details and guidance on this if interested.

PLEASE NOTE: If your truck has the Carbon Pro bed, WE CANNOT BUILD A CAMPER FOR IT. Those beds do not allow for traditional bed clamps to work. If you have a regular truck bed, you're all good.

Make it Chubby:

The Chubby adds 7" to the width of the camper. On midsize trucks it will roughly give you 68" East/West sleeping and on full size it will give roughly 75". Confirm with us actual measurements. Currently not available for Gen 1 Tacoma's/older Toyotas due to their narrow bed rails.

Camper Skin Color:

Trim Color:

Please read about our Painted vs. Anodized skin options and see photos of the different colors here!

Does Your Tailgate Have a "Fin"

Any kind of lip or fin that we would need to account for when building your rear door? Common one's are newer Ford's and Fourth Gen Tacoma's.

Side Windows:

We can do a combination of these on the driver and passenger sides. Let us know in an email if you like one type on the driver side and another type on the passenger side.

PLEASE NOTE: The Center Sliding Windoors may present a small leak in very high-wind, high-rain situations while driving due to the construciton of the center sliding pane.

Rear Windows:

Please Note: There is absolutely a bit more of a leak risk in severe weather with sliding windows, moving parts and all.

Awning Mount? (Awning Not Included)

If your desired awning is not on our supported awnings list please confirm with us we're able to mount it before ordering the awning.

Please Tell Us What Awning You Want Us to Install:

Check out the link below to see the protocol for getting your awning to us! If you're not sure which one yet, that's okay. We'll dial it in later.

Click Here To See A List of Approved Awnings and instructions for getting your awning to us in time for it to be installed on the camper!

Maxxair Fan:

Fans are pre-wired and routed past lift panels to the rear, driver side of the camper. Fan position is fixed so it is over the bed slide while you're sleeping and usable when the camper is closed.

Roof Tracks:

Cross Bars For Rhino Rack Rails:

65" Bars recommended for midsize trucks, 71" for full-size.

Roof Solar Port:

Positive and Negative MC4 connectors on the roof, pre-wired and routed past lift panels to the rear, driver side of the camper.

Interior Lights:

Four (4) dimmable, remote-controlled puck lights installed in the ceiling.

Canvas Insulation Kit:

Note: We recommend removing the liner when the camper is closed.

Note: V2 of the Arctic Pack is in production! Click here for photos and a rundown of what you get.

Headliner:

Insulated option has an R6 insulation value and greatly increases comfort in both summer and winter.

Mattress:

Your sleep is important. Please check out our in-depth mattress guide here!

Positive Pressure Vent:

Placed on the passenger-side of the front wall.

Door Latch Covers

A protective cover for the locks on your rear door to protect them from road salt, highway grime, and dust while driving!

Planar 2D Diesel Heater w/ Heater Port*

*battery required for proper operation - not included. 2" ports fit most 2kw heaters using 2"/60mm ducting, including the Planar 2D. 3" ports fit most 5kw heaters using 3"/75mm/76mm ducting.

PLEASE NOTE: Current tariffs on Canadian products may result in the Planar cost being more than anticipated. We're seeing anywhere from $120 to $200 more per unit as the tarriff bills arrive. Please be aware we may need to charge more than $1800/unit as this continues to unfold and chnage week to week.

Heater Port Position

We recommend placing the ports towards the rear of the camper where they will be least affected by cargo or your future build-out. If you'd like it placed in a custom location please indicate where in the comments.

Where Would You Like The Camper Installed?

Camper Total Cost

Note: this does not include Flagstaff, AZ sales tax of 9.39% that applies if you're having the camper installed at our shop in Flagstaff.

Name

First NameLast Name

Email

example@example.com

How did you hear about us?

If other, where?

Please note: Your spot in line is not secured until the $500 deposit is paid. You may pay the deposit on the next page, or pay later.

If you're just wanting a formal estimate mocked up - submit the form, and reply-all to the email you just received and ask for a formal estimate!

Form Source