All You Can Eat Camper Builder

TRUCK INFORMATION
Vehicle Make?*
Ram Model?*
Nissan Model?*
Chevy/GMC Model?*
Jeep Model?*
Toyota Model?*
Ford Model?*
Full Size Bed Length*
Mid Size Bed Length*
Vehicle Year?*
ATTENTION FORD MAVERICK OWNERS

Alright, you know your truck is a little diffferent than most. That's okay, we're not here to judge, but here's some information you need to know:

- Your sleeping platforms are will have a maximum length of 76" (head-to-toe). This gives you ~16" of passthrough space from edge of bed to the rear wall. We can make your bed shorter/this space larger upon request.

- Unless you want to chop down the front corners of your truck bed, we can only build you a standard-width camper, no Chubbys.

- If you want to cut the front corners of your bed to make them square, we can build you a wider standard-width camper or a Chubby version (probbaly). Reach out to us for details and guidance on this if interested.
PLEASE NOTE: If your truck has the Carbon Pro bed, WE CANNOT BUILD A CAMPER FOR IT. Those beds do not allow for traditional clamps to work. If you have a regular truck bed, you're all good.

THE BASICS
Make it a Chubby:*
The Chubby adds 7" to the width of the camper. On midsize trucks it will roughly give you 68" East/West sleeping and on full size it will give roughly 75". We can confirm actual dimensions specific to your truck. Currently not available for First Gen Tacoma's or Toyota Pickups (some older Toyotas will go, just confirm with us).
Camper Skin Color:*
Please read about our Painted vs. Anodized skin options and see photos of the different colors here!
Trim Color:
Extra Bedding Height? (Stock Height is 8")*
Rear Door Style:*
All doors come equipped with keyed external locks and internal pin latches. If you select Barn Doors and Extra Bedding Height we can increase the height of the doors by 2"
Rear Door Height Adjustment:
Increase the rear door opening by 2"
Describe the asymmetrical split you want and which door you want to open first (driver or passenger):*
Something like "70/30" or "make passenger door 36in" Note: Smallest door we will make is 18" wide.

HATCHES AND WINDOWS
Driver Side Solid Metal Side Hatch?
Side Hatches come with external locking latches, keyed the same as your rear door(s). Hatches are 36" wide and as tall as the sidewall allows. Want a window/hatch combo? Check out our "windoors" in the window section.
Driver Side Hatch Position:*
We recommend placeing hatches toward the cab to maximize utility and minimize interaction with the barn doors when they are fully open and latched. This interaction is unavoidable on all 5' and 5.5' beds and some 6' beds.
Window in Driver Side Hatch?
Folding Countertop in Driver Side Flip-Down Hatch?
11x33" folding countertop, mounted to the flip-down hatch that can be used inside or outside the camper.
Passenger Side Solid Metal Side Hatch?
Side Hatches come with external locking latches, keyed the same as your rear door(s). Hatches are 36" wide and as tall as the sidewall allows. Want a window/hatch combo? Check out our "windoors" in the window section.
Passenger Side Hatch Position:*
We recommend placing hatches toward the cab to maximize utility and minimize interaction with the barn doors when they are fully open and latched. This interaction is unavoidable on all 5' and 5.5' beds and some 6' beds.
Window in Passenger Side Hatch?
Folding Countertop in Passenger Side Flip-Down Hatch?
11x33" folding countertop, mounted to the flip-down hatch that can be used inside or outside the camper.
Front/Cab-Facing Window?
Windows in the Barn Doors Halves?
One in each barn door.
Windows in the Asymmetrical Barn Doors?
Window will be placed in the larger door, as centered on the rear as possible.
Windows in Rear Hatch?
Centered in the rear hatch.
Driver Side Window?
Passenger Side Window?
NOTE: The windoor's exterior locks are keyed different than the rear doors of the camper.
NOTE: The sliding version of the "windoor" will allow a small amount of water intrusion during specific conditions. A sideways rain, at highway speeds, hitting the sliding pane at just the right angle will cause a small drip. If you select this option please be aware of this. The windoor's exterior locks are keyed different than the rear doors of the camper.
Driver Side Window Position?*
Passenger Side Window Position?*
Arctic Tern Windows:
Arctic Tern windows can be installed on the sidewalls or rear doors of campers for Cost + $175 Install Fee. If you're interested in these windows please indicate what window and where in the comments for a quote.

ROOF OPTIONS
Maxxair Fan:
Fans are pre-wired and routed past lift panels to the rear, driver side of the camper. Fan position is fixed so it is over the bed slide while you're sleeping and usable when the camper is closed.
Roof Tracks:
Cross Bars For Rhino Rack Rails?*
65" Bars recommended for midsize trucks, 71" for full-size.
Roof Solar Port?
Positive and Negative MC4 connectors on the roof, pre-wired and routed past lift panels to the rear, driver side of the camper.
Lift Struts to Help Open/Close the Roof?*
Recommended on all campers. We will use our best judgement to select the appropriate strength struts for your camper. If you're planning on carrying cargo or loading up on solar, let us know in the comments section at the bottom of the form.

AWNINGS AND MOUNTS
Awning Mount? (Awning Not Included)
Tell us what awning you will be sending us to install in the comments. If your desired awning is not on our supported awnings list please confirm with us we're able to mount it before ordering the awning.
Click Here To See A List of Approved Awnings as well as instructions for shipping your awning to us ahead of your camper being built.
PLEASE NOTE: You've selected Barn Doors, Increased Rear Door Height, and Awning Mount. The larger barn door may impact the awning and result in not being able to latch the door on the awning side securely against the camper when open. We recommend removing the Increased Door Height to avoid this potential interaction.
Awning Prep?
We'll pre-place studs, pre-drill the studs, and relocate the roof latches so a future awning won't block them.
Awning Channel For Keder Rope?
Supports 8mm (5/16") Keder Rope.
Jerry Can Mount?
Jerry Can NOT Included.
Propane Tank Mount?
Propane Tank NOT Included.
5lb Propane Tank Position:*
Note: Barn doors must not have windows in order for us to place the mount on them.
10/11lb Propane Tank Position:*
Note: We will not place a 10/11lb propane tank mount on barn doors.
Exterior Mounting Track:
80/20 and Unistrut are functionally identical. 80/20 is a little sleeker and Unistrut is a little lighter as well as takes a more universally available T-nut. If you'd like it on BOTH sides of the camper, please make that known in the comments.
Full-Length Unistrut Track Position:*
Full-Length track requires a sidewall with no hatches or windows.
Full-Length 80/20 Track Position:*
Full-Length track requires a sidewall with no hatches or windows.
Half-Length Unistrut Track Position:*
Half-Length 80/20 Track Position:*

INTERIOR ADD-ONS AND STITCHWORK
Fold Down Interior Countertop?
Countertop is 16x36". We recommend placing it towards rear to maintain usability when bedslide is extended. If you'd like it towards the front please indicate that in the comments section.
Clear Vinyl Windows?
Sewn into canvas windows between bug screen and solid canvas layer.
Canvas Insulation Kit?
Note: We recommend removing the liner when the camper is closed.
Interior Overhead Puck Lights?
These dimmable, remote-controlled puck lights get added to the interior "push bars". Wires run to rear, driver side of camper and left bare for customer to complete.
Headliner?
Typically paired with roof insulation for a completed, clean finish.
Roof Insulation?
Typically paired with the headliner for a completed, clean finish.
Roof Daisy Chain?
Mattress?
The 3" mattress REQUIRES the extra bedding height option to be selected.

OTHER ADD-ONS
Door Latch Covers
A protective cover that encloses your rear door and side hatch latches to protect them from road salt, highway grime, and dust while driving!
Positive Pressure Vent?
Placed on the passenger-side of the front wall.
Third Brake Light?*
Shore Power Port?
Note: This is a 120v AC passthrough, NOT a 30a RV hookup.
Exterior Flood Lights
Number of Flood Lights*
Please indicate in the comments where you'd like the flood lights mounted. We will install flood lights towards the front or rear of both sides of the camper and towards the driver or passenger side of the rear wall (or both).
Planar 2D Diesel Heater w/ Heater Port*
*battery required for proper operation - not included
Standalone Diesel Heater Port
2" ports fit most 2kw heaters using 2"/60mm ducting. 3" ports fit most 5kw heaters using 3"/75mm/76mm ducting.
Heater Port Position*
We recommend placing the ports towards the rear of the camper where they will be least affected by cargo or your future build-out. If you'd like it placed in a custom location please indicate where in the comments.

END
Please tell us the following information in the comments alongside any custom requests:
-Which Arctic Tern window(s) you'd like and position for each.
-If you're going to be carrying cargo or several solar panels on your roof.
-Where you would like the exterior flood lights positioned.
-What awning you'd like installed.
Comments/Custom Requests:
Want something centered on a sidewall? Sure. Want a smaller hatch to also fit a window next to it? You got it. Want us to change the fundamental design of the camper to fit an RV door? No. We cannot make all custom requests happen, but we'll try.
C-Clamps for Mounting (mandatory if we're installing the camper):*
You need these.
Camper Total
Note: This does not include the 9.39% sales tax
Name*

First NameLast Name
Email*
example@example.com
How did you hear about us?*
If other, where?*
Please note: Your spot in line is not secured until the $500 deposit is paid. You may pay the deposit on the next page, or pay later. If you have already paid and secured your date, please ignore the payment link that follows.

If you're just wanting a formal estimate mocked up - submit the form, exit out of the payment screen, and reply-all to the email you'll receieve asking for a formal estimate!
Should be Empty: