Bivy Camper Builder

- Vehicle Make?
- Ram Model?
- Nissan Model?
- Ford Model?
- Chevy/GMC Model?
- Jeep Model?
- Toyota Model?
- Full Size Bed Length
- Mid Size Bed Length
- Vehicle Year?
- Does Your Tailgate Have a "Fin"
  Any kind of lip or fin that we would need to account for when building your rear door? Common one's are newer Ford's and Fourth Gen Tacoma's.
- PLEASE NOTE: If your truck has the Carbon Pro bed, WE CANNOT BUILD A CAMPER FOR IT. Those beds do not allow for traditional clamps to work. If you have a regular truck bed, you're all good.
- Make it a Chubby:
  The Chubby adds 7" to the width of the camper. On midsize trucks it will roughly give you 68" East/West sleeping and on full size it will give roughly 75". We can confirm actual dimensions specific to your truck. Currently not available for First Gen Tacomas (some older Toyotas will go, just confirm with us).
- Camper Skin Color:
- Please read about our Painted vs. Anodized skin options and see photos of the different colors here!
- Trim Color:
- Rear Door Style:
  All doors come equipped with keyed external locks and internal pin latches.
- Describe the asymmetrical split you want:
  Something like "70/30" or "make passenger door 36in" Note: Smallest door we will make is 18" wide.
- Sleeping Platforms
  Two 20" floating sleeping platforms that can be stacked or pushed together to make a 40" platform, or removed entirely.
- Sleeping Platforms (East/West ONLY)
  Two 20" floating sleeping platforms that can be stacked or pushed together to make a 40" platform, or removed entirely.
- Platform Prep
  Don't want our platforms (or they're not available for your truck) but still want to fabricate your own later? We can add in the framing we would use for floating platforms so you already have a surface for them to rest on.
- C-Clamps for Mounting (Mandatory):
  You need these.
- Driver Side Hatch?
  Side Hatches come with external locking latches, keyed the same as your rear door(s). Hatches are as tall as the sidewall allows.
- Driver Side Hatch Position:
  NON-Full Length hatches are 36" wide by default if you don't indicate otherwise in the comments.
- Passenger Side Hatch?
  Side Hatches come with external locking latches, keyed the same as your rear door(s). Hatches are as tall as the sidewall allows.
- Passenger Side Hatch Position:
  NON-Full Length hatches are 36" wide by default if you don't indicate otherwise in the comments.
- Front/Cab-Facing Window?
- Windows in the Barn Doors Halves?
  One in each barn door.
- Windows in the Asymmetrical Barn Doors?
  Window will be placed in the larger door, as centered on the rear as possible.
- Windows in Rear Hatch?
  Centered in the rear hatch.
- Driver Side Window?
- Passenger Side Window?
- Driver Side Window Position?
- Passenger Side Window Position?
- Arctic Tern Windows:
  Arctic Tern windows can be installed on the sidewalls or rear doors of campers for MSRP + $175 Install Fee. If you're interested in these windows please indicate what window and where in the comments for a quote.
- Maxxair Fan:
  Fans are pre-wired and routed past lift panels to the rear, driver side of the camper.
- PLEASE NOTE: We can not install rooftop fans on 5' Bivy's due to there not being enough space between the lift panels when the roof is closed. Sorry about that!
- Roof Tracks:
- Cross Bars For Rhino Rack Rails?
  65" Bars recommended for midsize trucks, 71" for full-size.
- Roof Solar Port?
  Positive and Negative MC4 connectors on the roof, pre-wired and routed past lift panels to the rear, driver side of the camper.
- Lift Struts to Help Open/Close the Roof?
  Recommended on all campers. We will use our best judgement to select the appropriate strength struts for your camper. If you're planning on carrying cargo or loading up on solar, let us know in the comments section at the bottom of the form.
- Awning Channel For Keder Rope?
  Supports 8.5mm (5/16") Keder Rope.
- Jerry Can Mount?
  Jerry Can NOT Included.
- Propane Tank Mount?
  Propane Tank NOT Included.
- 5lb Propane Tank Position:
  Note: Barn doors must not have windows in order for us to place the mount on them.
- 10/11lb Propane Tank Position:
  Note: We will not place a 10/11lb propane tank mount on barn doors.
- Exterior Mounting Track:
  80/20 and Unistrut are functionally identical. 80/20 is a little sleeker and Unistrut is a little lighter as well as takes a more universally available T-nut.
- Full-Length Unistrut Track Position:
  Full-Length track requires a sidewall with no hatches or windows.
- Full-Length 80/20 Track Position:
  Full-Length track requires a sidewall with no hatches or windows.
- Half-Length Unistrut Track Position:
- Half-Length 80/20 Track Position:
- Clear Vinyl Windows?
  Sewn into canvas windows between bug screen and solid canvas layer.
- Canvas Insulation Kit?
  Note: We recommend removing the liner when the camper is closed.
- Note: V2 of the Arctic Pack is in production! Click here for photos and a rundown of what you get.
- Interior Overhead Puck Lights?
  These dimmable, remote-controlled puck lights get added to the interior "push bars". Wires run to rear, driver side of camper and left bare for customer to complete.
- Headliner?
  Typically paired with roof insulation for a completed, clean finish.
- Roof Insulation?
  Typically paired with the headliner for a completed, clean finish.
- Roof Daisy Chain?
- Door Latch Covers
  A protective cover that encloses your rear door and side hatch latches to protect them from road salt, highway grime, and dust while driving!
- Positive Pressure Vent?
  Placed on the passenger-side of the front wall.
- Third Brake Light?
- Exterior Flood Lights?
  The RV Leisure lights are 400 lumen (and come with clear and amber covers). The Rigid Scene lights are 1100 lumen (white light) and come with an all-metal housing.
- Number of Exterior Flood Lights:
- Shore Power Port?
  Note: This is a 120v AC passthrough, NOT a 30a RV hookup.
- Planar 2D Diesel Heater w/ Heater Port*
  *battery required for proper operation - not included. 2" ports fit most 2kw heaters using 2"/60mm ducting, including the Planar 2D. 3" ports fit most 5kw heaters using 3"/75mm/76mm ducting.
- PLEASE NOTE: Current tariffs on Canadian products may result in the Planar cost being more than anticipated. We're seeing anywhere from $120 to $200 more per unit as the tarriff bills arrive. Please be aware we may need to charge more than $1800/unit as this continues to unfold and change week to week.
- Heater Port Position
  We recommend placing the ports towards the rear of the camper where they will be least affected by cargo or your future build-out. If you'd like it placed in a custom location please indicate where in the comments.
- Are You Interested In Components For An Interior Build-Out?
- Click this link to learn about modular build out options and components from Lost Hiway Customs. We can have them ready for pickup with your camper!
  
  Don't worry, that link opens a new tab so you won't lose your build progress.
- Comments/Custom Requests:
  Want a smaller hatch to also fit a window next to it? Sure. You want full-length 80/20 on the driver side and half-length 80/20 on the passenger side? You got it. Want us to change the fundamental design of the camper to fit an RV door? No. We cannot make all custom requests happen, but we'll try.
- Please tell us the following information in the comments alongside any custom requests:
- -Which Arctic Tern window(s) you'd like and position for each.
- -Where you would like the exterior flood lights positioned.
- -If you're going to be carrying cargo or several solar panels on your roof.
- Comments/Custom Requests:
  Want something centered on a sidewall? Sure. Want a smaller hatch to also fit a window next to it? You got it. Want us to change the fundamental design of the camper to fit an RV door? No. We cannot make all custom requests happen, but we'll try.
- Where Would You Like Your Camper Installed?
- Camper Total
  Note: This does not include the 9.39% sales tax
- Name
  
  First NameLast Name
- Email
  example@example.com
- How did you hear about us?
- If other, where?
- Please note: Your spot in line is not secured until the $400 deposit is paid. You may pay the deposit on the next page, or pay later.
  
  If you're just wanting a formal estimate mocked up - submit the form, and reply-all to the email you just received and ask for a formal estimate!
- Form Source
- Should be Empty: