Dormakaba ED100 / ED250 Commissioning Report

Product Test Report

AS 5007-2007 Appendix D (Normative)
D1 General Information

The following information shall be recorded on the test report
(a) Name of Model Under Test*
Dormakaba
(c) Date of completion of testing*

DayMonthYear
Date
(d) Door type under test*
(e) Maximum door weight tested*
D2 Areas/Items To Be Tested

The following items shall be recorded on the test report and all tests shall be carried out in accordance with Clause 4.4
(a) (i) Endurance Test - Normal Operation (for CA Class 1B.2 to 9 building)*
(a) (ii) Endurance Test - Normal Operation (for BCA Class 1A and 10 building)*
(b) Mains power failure test*

I hereby certify that all work and installations carried out by me fully comply with the AS 5007-2007 Australian Standards, ensuring that all relevant guidelines, procedures, and testing requirements have been meticulously followed and executed to the highest professional standards. I have conducted all necessary assessments and verifications to confirm that the installation meets the specified criteria.

I understand and acknowledge that should any aspect of this unit fail to conform to the established standards, it is imperative that the unit remains out of service and inaccessible to the public until all identified issues are addressed and rectified. Furthermore, I commit to taking any necessary corrective actions promptly to bring the unit into full compliance, thereby ensuring its safety, reliability, and suitability for public use.

By signing this document, I affirm my commitment to uphold the integrity of the installation and my professional responsibility to adhere to all applicable standards and regulations.
Technician's Name*

First NameLast Name
Technician Security License:*
Date*

DayMonthYear
Date
Signature*

Powered by Jotform SignClear
Should be Empty:

Product Test Report