Holley Sniper Build Sheet Logo

  • Holley Sniper Build Sheet

    Please complete this form with as much accuracy as possible. If there are any details we do not cover, feel free to share additional information in the notes section on the final page.

  • ⚠️Quick Note

    Don’t worry — this form looks longer than it really is. Most questions just help us get your base tune closer so the process goes smoother and needs fewer revisions. The only mission-critical info is marked with a red asterisk (*). If you’re unsure about anything else, just fill in what you can — we’ll review it and follow up if needed. 

    If there’s anything you think we should know that isn’t specifically asked, please include it in the Additional Information section at the end.

    We’d always rather have too much info than miss something small that could make a big difference.

  • Customer Information

  • Holley Information

    If you're unsure on any of these, consult the information that's provided for your kit.

  • Chassis Information

  • Powertrain Information

  • Engine

  • Transmission

  • Fuel System

  • Fuel pump flow is * *
    @ * psi

    Example: Fuel pump flow is 450 LPH @ 43.5 psi

  • Inputs/Outputs

  • Please select your all applicable modifications to the powertrain

  • Tune Type

  • We offer different options for getting your vehicle tuned:

    Street, Remote, and Dyno

    Please see our page Comparing Tune Types to determine which is the best option for you.

  • WARNING:


    Your vehicle's level of modification would greatly benefit from a complete remote tune or full custom dyno tune. The other tuning options are adequate for a base tune, but we strongly recommend a more in-depth solution for the final tuning.


    With this in mind, feel free to update the type(s) of tuning above as you see fit.

  • Stage 2 Modifications

    Internal Modifications (Camshaft, Cylinder Heads, Intake Manifold)

  • Camshaft

  • Cylinder Heads

  • Intake Manifold

  • Stage 3 Modifications

  • Supercharger

  • Turbocharger

  • Procharger (or Centrifugal SC)

  • Nitrous

  • Tune Agreement

    By submitting this form, you fully understand and agree with the following terms and conditions:

    1) Any information/modifications not contained in this build sheet will NOT be accounted for in tuning.

    2) Modifications to emissions equipment is not permitted, under any circumstances, on any vehicle that will be operated on public roadways.

    3) Stage 2 and Stage 3 street or bench tunes are intended as a base tune ONLY. This means that they should allow the vehicle to start, run, and drive under light throttle/loads. There are NO guarantees on safety/performance of a Stage 2 or Stage 3 street or bench tune under heavy acceleration or wide-open throttle conditions.

    4) PowerLabs is not responsible for any damages to person or property due to abuse, neglect, or failure to follow tuner recommendations.

  • Should be Empty: