• Axiom TR34 Exam

    4TH EDITION

  • My Products*

    prevnext( X )
    Axiom TR34 4th Ed. Certification. 2 Attempts per purchase per user
    Axiom TR34 4th Ed. Certification

    2 Attempts per purchase per user

    $350.00$350.00
      
    Total
    $0.00$0.00

    Credit Card

  • Rules and Regulations

    • Test contains 50 questions
    • You must score 80% or higher to pass
    • 4th Edition of TR-34
    • The test is in English only
    • You have a total of two attempts per purchase
    • There is no time limit for completing the test
  • Format: (000) 000-0000.

  • This section will test your knowledge of TR34

  • 1. Is the Axiom 1155 a Type 1 or Type 2 device*
  • 2. According to Table 3.1 of The Concrete Society's TR34, it is recommended that two fundamental properties of the floor's surface regularity be surveyed. What are they?*
  • 3. What is the permissible deviation height for new floor construction from a fixed datum plane?*
  • 4. .What are the permissible Property E/F limits for an FM2 class floor*
  • 5. Which description best defines Property F (Flatness) as outlines in TR34?*
  • 6. True or False: The role of the 95th percentile in analyzing Property F results is used to determine the compliance with flatness requirements?*
  • 7. How is the grid pattern for free movement surveys set out according to TR34?*
  • 8. Which statement is true regarding the 95th Percentile limit of Property E of FM2*
  • 9. True or False: The permissible Property E/F limits for an FM3 class floor is 8.0/2.2*
  • 10. True or False: A floor classified as FM1 requires very high standards of flatness and levelness for reach trucks operating 13m or higher without side-shift.*
  • 11. Which areas are excluded from the survey.*
  • 12. What equipment is can be used to measure Property E.*
  • 13. True or False: You have to use only one device to collect both Property E and Property F*
  • 14. What definition best describes Property E*
  • 15. On a FM2 floor, what is the 95th Percentile limit of Property F*
  • 16.True or False: FM1 floors have far less flatness and levelness specifications than FM4*
  • 17. For property F, how is the minimum total length of survey lines determined?*
  • 18. How many classifications of FM class floors exist?*
  • 19. True or False: The Technical Report 34 is commonly used within Europe*
  • 20. Both Property E and Property F can be measured using specialized equipment like the Axiom 1155.*
  • 21. True or False: Surface regularity is not a concern when designing industrial concrete floors according to TR34.*
  • 22. True or False: The Technical Report 34 standard is only used within Europe*
  • 23. Which of these vehicles would most benefit from a floor with high Property E and Property F specification?*
  • 24. Which property would you focus on if you were concerned about forklifts moving smoothly across a large warehouse?*
  • 25. When measuring Property E, what is the primary concern?*

  • Axiom 1155 Equipment

    This section represents your knowledge of how to use the Axiom 1155, FF/FL app, and the Report Generator
  • 1. What is the recommended minimum time that the Axiom must be powered on BEFORE performing a field calibration?
  • 2. Referencing the image below, why is the "Measure Job" button greyed out?*
  • Image field 111
  • 3. Referencing the image below, What is wrong with the file name entered?*
  • Image field 110
  • 4. When starting a run and taking the first measurement point, where should the foot pad (on the kickstand side) be in relation to you?*
  • 5. Referencing the image below, in the measuring screen. When does the TR34 app save your run.*
  • Image field 117
  • 6. If you mistakenly taken a measurement point and want to delete it. Does the Axiom app allow it?*
  • 7. True or False: The NODE app mode requires you take the entire perimeter first.*
  • 8. True or False: The RUN app mode allows you to take Runs at any node to node length.*
  • 9. Referencing the image below, on the "Open Job" screen, how do you Rename or Delete an existing job file.*
  • Image field 116
  • 10. Does the Axiom 1155 need to be sent back to the manufacturer for a yearly calibration?*
  • 11. In TR34 RUN mode, when referencing the image below, why does the app prevent the user from proceeding when pressing 'Measure*
  • Image field 115
  • 12. Referencing the image below, what's the purpose for the icon to flip while taking measurements?*
  • Image field 114
  • 13. Which of the following is NOT one of the two essential features a device (such as a cell phone or tablet) must have to run apps and collect measurement data with an Axiom 1155?*
  • 14. When using the Axiom Toolkit app, what is the warning that it displays prior to opening the App?*
  • 15. Where are the batteries located for the Axiom 1155?*
  • 16. How many and what kind of batteries does the Axiom 1155 use?*
  • 22. Referencing the image below, when using the TR34 Report Generator, under the Report Details tab, what does the Import/Replace Data File button do?*
  • Image field 106
  • 17. Prior to calibrating the Axiom, which statement is false?*
  • 18. When taking measurements, when is a run saved and stored as a completed run?*
  • 19. Where can the Apps for the Axiom 1155 be downloaded from?*
  • 20. When the small blue light next to the green light is illuminated on the Axiom what does it mean?*
  • 21. What are the app unlock codes used for?*
  • 22. Which TR34 app mode collects just Property F?*
  • 23. Referencing the image below, how can you restore the missing report tabs such as the Profile plots tab?*
  • Image field 105
  • 24. Prior to taking each Run it's good practice to, do what?*
  • 25. Where is the Serial number located on the Axiom 1155?*
  • Should be Empty: