• Thank you for your order!

  • The video below is a short video with instructions on how best to use this form

  • If you need a refresher course on how to read a tape measure, below is a good video

  • Step 1: Please enter your Order Number

  • Please watch the video below and then choose the appropriate next step.

  • Proud vs Flush

  • Please choose your preferred mounting style*

  • Measurements used to Fabricate a Flush Mount Top Grille

  • Measurement 1: Top Gap Height

  • Has your refrigerator been leveled?*
  • Are you able to remove your refrigerator from the opening to install the trim kit? Please note that the top grille will be screwed to the face of the cabinet to make this possible.*
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof

  • Measurement 2: Distance to extend top grille above opening (if applicable)

  • Would you like to extend the top grille above the opening?*
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof

  • Measurement 3: Width of opening

  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof

  • Measurements used to Fabricate a Proud Mount Top Grille

  • Measurement 1: Top Gap Height

  • Has your refrigerator been leveled?*
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof

  • Measurements used to Fabricate Side Trim

  • Right Side

  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof

  • Left Side

  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof

  • Miscellaneous Information needed to build your Trim Kit

  • Does left or right side have cabinet doors or other obstructions which might limit the amount we can overlap the front of the cabinet (see video above)? If yes, provide measurement here.

  • Proud Mount Side Trim
    For proud mount grilles, we have the ability to fabricate it so it covers up a portion of the refrigerator case,but need to know how much you need to cover.  Please select how much of the refrigerator case we need to cover.  Minimum is 7/16" (due to tooling) and max is 2-1/4".  

  • If more of your refrigerator case is showing than what our side trim can cover, we offer "side panels" that adhere to the side of your refrigerator and can cover up to 6" of your refrigerator case.

  • Is the front of your refrigerator cabinet out of plane (see video at the top of the page)?*
  • Do we need to notch for any baseboards? If so, please provide dimensions below.*

  • As noted in the video, if you'd like to explore removing a portion of your baseboards here is the video link I mention below.

  • Final Step

    Pictures and/or videos are encouraged, but not required. If provided, we will review them prior to fabrication and make sure we don't see any issues.

    You can upload up to 3 photos or videos.

    We recommend capturing your entire cabinet - top to bottom - in the photos. We suggest a photo from the front, one left of center, and one right of center.

    Tips for Best Results:

    Ensure the entire cabinet is captured in each photo to help us assess it properly.

    Taking multiple angles will give us a clearer view and avoid any confusion during fabrication.

    Why Uploading Helps:

    Providing clear images allows us to address potential issues early and ensures the final product meets your expectations.

  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Should be Empty: