Candle Vessel Testing Agreement

By submitting this form, you agree to follow all of The Lillian Co.'s testing procedures.

The vessel must undergo a Water Tightness Test, where it should be filled with water for a minimum of 30 minutes to check for slow leaks. If there is a leak, please send detailed pictures of the damage; do not attempt repairs before contacting The Lillian Co.

The Heat Safety Test involves heating water to 195°F and placing it into the vessel. For safety, place the vessel in a sink or tub to avoid injury—do not hold the vessel during testing.

The Volume Measurement must be accurate, with at least 1/4 inch headspace, and the exact volume should be recorded on the provided Excel sheet if applicable.

All vessels must be thoroughly cleaned of any debris or excess patina before testing.

In addition, the vessel must be made of approved materials, including metals, porcelain, jasperware, and ceramics, with no crystal or glass allowed.

The vessel must hold at least 10 ounces in volume, and there are no maximum volume limits.

The vessel must meet all of these safety and material requirements to be officially approved by The Lillian Co. for certification.

Name*

First NameLast Name

Company Name (if applicable)

The Lillian Co.

Email*

lil.thelillianco@gmail.com

Please provide a brief description to identify your vessel(s) alongside with volume measurement in ounces. You can include details for as many vessels as you have in the space provided.*

Please upload pictures to help identify your vessel(s), including photographs of any disclaimers or damage. If you have already uploaded this information in the provided spreadsheet, you may disregard this section.*

Did you perform the Water Tightness Test? "Fill the vessel with water for a minimum of 30 minutes to check for slow leaks."*

YesNo

Did you have any leaks? If there’s a leak, send detailed pictures of the damage. Do not attempt repairs before contacting The Lillian Co. Leaks must be reported before approval.*

YesNo

Did you perform the Heat Safety Test? "Heat water to 195°F and let sit in the vessel. Ensure the vessel is placed in a sink or tub to avoid injury. The vessel should not be held during the test."*

YesNo

Did you accurately measure the vessel’s volume? "Measure the vessel’s capacity using a kitchen scale, leaving a minimum of 1/4 inch headspace. Record the exact volume in ounces in the description above or provided Excel sheet."*

YesNo

Is the vessel cleaned of any debris or excess patina? "The vessel must be thoroughly cleaned of any debris and excess patina prior to being sent for commission."*

YesNo

Is the vessel glass or crystal?*

YesNo

Does the vessel hold at least 10 ounces in volume?*

YesNo

Does this vessel meet all of The Lillian Co.'s testing requirements?*

YesNo

Please sign to confirm agreement and compliance with the testing procedure.

Include any other relevant information, clarifications, or questions regarding the testing process.

Thank You for Your Submission!

Thank you for submitting your vessel for testing. Lilly will review your information and get back to you as soon as possible. If you have any further questions or need assistance in the meantime, feel free to reach out.