Note: To avoid customer confusion, we are separating the head and foot sides from the left and right sides. Head and foot barriers are now referred to as "Rails" and are selected separately from the sides. "Sides" now only refers to the left and/or right barriers, if selected.

1. Gunnell will select factory settings if no setting is made

    

2. Inside Width (IDW): The measurement between side pads, side ABS, or width of top platform, whichever is smallest

    

3. Inside Length (IDL): The measurement between side pads,

   side ABS, or width of top platform, whichever is smallest

4. Outside Width (ODW): Inside Width, IDW, plus the following

   measurement whenever applicable:

   (i) 2” for fixed sides;

   (II) 3” for hinged flip down sides;

   (III) 4” for removable sides when sides not removed;

   (IV) 4.5” for angle adjustable locking sides; and

   (V) padding thickness

5. Outside Width is the Inside Width for removable sides when sides removed

6. Platform to Floor Height: measurement from the ground to the top of the platform below the ABS.

7. Maximum 4 sides/rails: head, foot, left side and right side.

8. Side/Rail Height: measurement from the top of sides to the top of steel platform, ABS, or base pads, whichever is the smallest

9. Factory setting of 8” Side/Rail Height is measured from top of steel platform to the top of sides

Email: support@gunnell-inc.com • Tel: 800-551-0055 • Fax: 800-794-5483

Specifications and prices are subject to change without notice.