About Paint Protection Film
The paint protection film is designed to protect your vehicle’s paint from chips, scratches, swirl marks, and is 8 mils thick. PPF is applied to the exterior of your vehicle’s paint. The PPF is warrantied for 10 years from yellowing, staining, cracking, blistering and delamination. The PPF warranty does not cover damage resulting from accidents or from objects that hit or penetrated the film.
Drying Time
Your new paint protection film will take 3 - 4 weeks to fully cure depending on weather conditions. Do not wash your vehicle for 5 days. Vehicles should be returned for inspection within 2-4 weeks.
Condition of vehicle for paint protection film installation
The vehicle cannot have any paint protection coatings on it such as ceramic coatings. These can affect the effectiveness of the adhesion and may cause lifting, bubbles, and other issues. The client is aware that the design of the PPF is for OEM factory paint. The client waives and releases BILL LEE'S WRAPSTAR from any warranty or damage claims where a product has been applied to a non-OEM paint surface.
Paint
Paint may lift on repainted panel/OEM paint if improperly prepped and painted. By authorizing BILL LEE’S WRAPSTAR to proceed with the install, the client hereby acknowledges the risk, waives any claims against BILL LEE’S WRAPSTAR, and agrees that BILL LEE’S WRAPSTAR will not be liable in the event that damage does occur during the installation process.
Paint Chips
PPF is to prevent your vehicle from future paint chip damage. PPF installation over paint chips will look like contamination after the install due the unevenness of the paint surface. We do not recommend touchup on small paint chips due to the aesthetics of the install thereafter.
Installation
All PPF kits are computer cut using cutting software. Pre-cut kits involve stopping short of edges, edges around badges, washers, and other parts. The customer understands that PPF is a sacrificial layer for your car, not a completely invisible or matte layer. Customers may choose to have custom design fit or bulk install for an additional fee.
Exposed Edges and Seams
Although we strive to wrap all edges, some cannot be wrapped. Debris build-up over time on exposed edges/seams will be more visible on white/light-colored vehicles. Partial installs will have more noticeable debris due to exposed edges. We recommend ceramic coating your vehicle to reduce debris build-up. There is no warranty or reapplication of the film due to debris build-up.
Headlights
Headlights are not recommended for PPF installation due to HID feature and exterior coating. By authorizing BILL LEE’S WRAPSTAR to proceed with headlight film installation, the customer hereby acknowledges the risk, waives any claims against BILL LEE’S WRAPSTAR, and agrees that BILL LEE’S WRAPSTAR will not be liable.
Film, Badge, & Decal Removal
Film, badge, and decal removal may cause the paint, glass, and defroster to be damaged. By authorizing BILL LEE’S WRAPSTAR to proceed with the removal, the client hereby acknowledges the risk, waives any claims against BILL LEE’S WRAPSTAR, and agrees that BILL LEE’S WRAPSTAR will not be liable in the event that damage does occur during the removal process.
Imperfections
Though we strive for perfection in our installations, due to the nature of the product, some degree of dust contamination and or minor imperfections are present in every PPF application, also pre-existing flaws, scratches, and rock chips on the paint are often much more noticeable after the PPF is installed. Paint Protection Film will have minor imperfections like orange peel. The used and older vehicle will have more imperfections due to its age.