Aerial Work Platform Daily Checklist
  • AERIAL WORK PLATFORM DAILY CHECKLIST

    HSEOP-26-01
  •  - -
  • 1. Platform and Guardrails - No loose or missing parts or visible damage. Lock pins in place.*
  • 2. Hose and Cable Guards on Boom - No damage to guards, hoses, or cables. Properly secured*
  • 3. Drive Motors and Brake Shields - Securely bolted in place with no leaks or missing hardware.*
  • 4. Drive Hub - No visible damage or evidence of leakage.*
  • 5. Tires and Wheels - No cut tires, no leaks, no rim damage, marks on lug nuts are inline, tires properly inflated, no missing lugnuts, lug nuts to be torqued to spec.*
  • 6. Frame - No bends, loose or missing hardware, or other damage.*
  • 7. Fuel Supply - Adequate fuel, filler cap in place. No damage, leaks or spills*
  • 8. Power Track - No visible damage to hydrualic or electrical lines.*
  • 9. Boom and Pivot Shaft - Must be properly secured and lubricated.*
  • 10. Lift Cylinder - Rod end shaft properly secured.*
  • 11. Tie Rods and Linkage - No visible damage, no steering, no loose or missing parts, no cylinder leaks.*
  • 12. Engine Oil - Full mark on dipstick with filler cap secured.*
  • 13. Ground Control Panel - Switches should be operable, placards legible, no visible damage.*
  • 14. Counterweight - Should be properly secured.*
  • 15. Engine Air Filter - Oil in bowl should be clean and pre-cleaner free of dirt.*
  • 16. Battery - Battery should have proper electrolyte level. Cables should be tight with no corrosion.*
  • 17. Hydrualic Oil Level - Should show full on dipstick with all systems shut down and boom stowed.*
  • 18. Hydraulic Oil Filter - Indicator should be a proper position with engine oeprating at full throttle and oil warmed up.*
  • 19. Turntable and Pinion - No loose or missing hardware or damage. Shows evidence of lubrication.*
  • 20. Boom - No visible damage, wear pads secure.*
  • 21. Platform Pivots and Cylinders - Pins secured with evidence of lubrication. No cylinder leaks.*
  • 22. Platform Control Console - Switches and levers should be properly secured and free to return to the neutral position. No loose or missing parts. No visible damage.*
  • 23. Emergency Safety (Override) Switch - Switch must be fully functional at all times.*
  • 24. Extending Axles (if so equipped) - No evidence of leakage, loose or missing parts, no visible damage, axle lock pins should be properly installed.*
  • 25. Fire Extinguisher - Checked daily, no visible damage, indicator shows full.*
  • 26. Operations Manual - Operating manual must be with the equipment.*
  •  
  • Should be Empty: