• P2Z Work Authorization (CMT)

    P2Z Work Authorization (CMT)

  •  - -
  • General Information

    Applicable to all work locations
  • -Adhere to Alberta Occupational Health and Safety, TDG and WHIMIS regulations.

    -Pre-job Hazard Assessment process shall be utilized to identify hazards and clarify risks to ensure appropriate controls are implemented or planned into the execution plan, muster sites, access, etc.

    -Prior to the start of work, or when the significant change occurs a formal Task Hazard Assessment shall be completed using the Task Hazard Assessment form.

    -To ensure HSE hazards and controls to protect employees are communicated to affected workers, a Pre-Job Hazard assessment meeting with ALL impacted workers is required prior to the start of a job or a change.

    -All incidents will be reported immediately to WATCO CMT. 

  • Minimum PPE requirements at site

    Hard Hat; Safety Glasses; High visibility vest or Category 2 reflective markings: FR long sleeved shirt/coat or coveralls; Gloves (applicable to task); CSA work boots (minimum 6" height).

  • Administrative Controls

    Company documentation must have been reviewed and available to all workers.

  • Fire Prevention

    All company vehicles and equipment shall have a charged ABC extinguisher readily available at site.

    All "Hot Work" areas will be wet down prior to beginning any spark producing tasks, a Fire Watch individual will monitor area during work activity, remaining for one hour after last spark.

  • Safety Conditions

    JSA review, Tailboard attendance and FLHA completion are required for all workers at site.

    All ground disturbance activities to be performed by trained individuals using current line locates and sweeps of existing utilities.

  • Construction Conditions

     Work permit only applies to work listed within the "Description of Work" above.

    All work must be performed within the TWA for the Block listed above.

  • Environmental Conditions

    All construction setbacks for wetland areas must be noted and adhered to.

    All spills must be reported immediately to WATCO CMT.

  •  - -
  •  - -
  • Powered by Jotform SignClear
  • Powered by Jotform SignClear
  • Should be Empty: