Laser Thermal Testing Services - Intake Form

Testing Services Intake Form

Please fill out this form to help us understand your testing needs and provide the best service possible.
CONTACT INFORMATION
Full Name*

First NameLast Name
Email Address*
example@example.com
Phone Number

Country CodeArea CodePhone Number
COMPANY INFORMATION
Company or Organization*
Address*

Street Address

Street Address Line 2

CityState / Province

Postal / Zip CodeCountry
Are you submitting 7 or more samples?*

YesNo
Since you are submitting 7 samples or more, please complete this intake form only for your first sample. Toward the end of this intake form, we will provide further instructions on to submit the details for your remaining samples to be tested.

YOUR SAMPLES
Please note that your samples must meet these minimum requirements:
- Surface finish: < 10 nanometer RMS
- Flatness: nominally flat
- Size:
  - Maximum: 150x150 mm (6x6 in)
  - Minimum: 1x1 mm
TRANSDUCER DEPOSITION - Please select one option:*

Laser Thermal to complete the transducer deposition - RECOMMENDEDCustomer to supply sample with transducer deposition completed. Customer must arrange for a deposit that follows a Laser Thermal reference standard.

Please specify the cleaning methods allowed before transducer deposition. *

Enter all relevant information about the thin film material for each sample*

	Reference ID / Label	Material	Atomic structure	Film thickness in nm (as accurate as possible)
Sample 1
Sample 2
Sample 3
Sample 4
Sample 5
Sample 6

Enter required information regarding the substrate of your thin film samples. Please ensure that you send us sample of your bare substrate(s).*

	Reference ID / Label	Substrate material	Single-side or double-side polish
Sample 1
Sample 2
Sample 3
Sample 4
Sample 5
Sample 6

Please share any other details about your samples you would like us to know ahead of testing

YOUR DESIRED MEASUREMENTS
We offer tests either in a standard format or you can request a custom format for your test.
- Standard spot measurement: random 10 spots average
- Standard thermal map: single thermal pixel every 100 microns over a 1x1 mm area.

Specify the desired test type(s) for each sample*

If you selected a custom spot measurement, please specify the number of spots, location and area
Optional: Upload a picture of specific location / area

Cancelof
If you selected a custom thermal map, please specify desired pixel density, location and area
Optional: Upload a picture of specific location / area

Cancelof
MEASUREMENTS

Please note that 1) cross-plane measurements require film to be on high conductivity substrate, 2) in-plane measurements require film to be on low-conductivity substrate AND a cross-plane sample must be provided as well, 3) volumetric heat capacity measurements require knowledge of the thermal conductivity.

Specify the data to be measured for each sample.*

	Average thermal conductivity	Cross-plane conductivity	In-plane conductivity	Interface resistance	Volumetric heat capacity
Sample 1
Sample 2
Sample 3
Sample 4
Sample 5
Sample 6

For each sample, please provide specific handling instructions to be followed after testing is complete.*

Should Laser Thermal use your shipping account for returning the samples?*

Yes, use my shipping account.No, use Laser Thermal shipping account. Handling & shipping fees will be applied to your account.
Please enter your shipping provider information*
Please enter your shipping instructions*
Please include any additional information we should be aware of regarding the handling of your samples after testing is complete.
REPORTING INFORMATION

Please indicate the individuals to whom we should send the final report

PAYMENT
Please indicate your expected lead time*

Standard lead time (2-3 weeks ARO & samples)Expedited lead time (1 week ARO and sample). 50% price premium
Please indicate your method of payment*

Credit cardPurchase orderOther
Please provide your Digital Signature to confirm your information*

Clear
Please verify that you are human*
Should be Empty:

Testing Services Intake Form