Quarterly Manitou Equipment Comprehensive Inspection Checklist
Operator Name
Date
/
Month
/
Day
Year
Date
EquipmentID/Model
Odometer Reading
Exterior & Structural Inspection
Inspection Item
Rows
Pass
Fail
Corrective Action Taken
No cracks or rust on frame, boom, or attachment points
Safety decals and load charts legible and intact
Steps, handrails, and grab handles secure and damage-free
Counterweight and panels secure, free of cracks or dents
Check for leaks under machine (oil, fuel, hydraulic, coolant)
Cab & Safety Equipment
Inspection Item
Rows
Pass
Fail
Corrective Action Taken
Seat belt functional, no fraying or cuts
ROPS/FOPS structure undamaged and compliant
Fire extinguisher present, fully charged, and inspected
Horn, backup alarm, and warning indicators operational
All mirrors, windows, and wipers intact and clean
Operator manual present in cab
Tires, Wheels &Suspension
Inspection Item
Rows
Pass
Fail
Corrective Action Taken
Tire pressure correct and even (record actual PSI)
Tread depth adequate and no sidewall damage
Wheel lug nuts secure and torqued to spec
Axle seals free of leaks
Steering components secure and responsive
Boom, Lift & Hydraulic System
Inspection Item
Rows
Pass
Fail
Corrective Action Taken
Boom extends/retracts smoothly without jerks
Hydraulic hoses free from cracks, wear, or leaks
Tilt, lift, and auxiliary functions operate correctly
Attachment coupler locks securely and functions properly
Boom pins greased and free of excessive play
Engine & Cooling System
Inspection Item
Rows
Pass
Fail
Corrective Action Taken
Engine oil level and condition checked; sample taken if required
Air filter clean and secured
Radiator free of debris and coolant level adequate
Fan belts inspected for wear and proper tension
No excessive smoke, vibrations, or abnormal noises during operation
Transmission & Drivetrain
Inspection Item
Rows
Pass
Fail
Corrective Action Taken
Transmission fluid at correct level and clean
No slipping or hesitation during gear shifts
Drive shafts and universal joints secure and greased
Parking brake and service brake tested and functional
Electrical System
Inspection Item
Rows
Pass
Fail
Corrective Action Taken
Battery terminals clean and secure
Charging system within correct voltage range
All lights (work, brake, signal, beacon) operational
Wiring harnesses secured with no fraying or exposed wires
Operational & Safety Tests
Inspection Item
Rows
Pass
Fail
Corrective Action Taken
All controls labeled and functional
Load handling tested under safe conditions
Parking brake holds machine securely on incline
Emergency stop switch functional
Stability and tilt alarm (if equipped) tested and operational
Inspector Name
Signature
Next Scheduled Quarterly Inspection Date:
/
Month
/
Day
Year
Notes/Deficiencies Found
Submit
Should be Empty: